If NASA made a Porsche 911 Restomod This Would Be It SOUNDS INCREDIBLE Catchpole on Carfection

Automobile Identity
371 followers
#automobile #autos #cars #4wheels #luxurycar #sportcar #highspeedcar #testdrive #toyota #tesla #porsche #hyundai #rollsroyce #royall #suvs
AI Generated·May contain errors
Down there, below the clouds, at the start of this amazing piece of road is NASA's JPL
Jet Propulsion Laboratory, one of the coolest places on the entire planet.
And beyond that, in Los Angeles, is the North American Aviation Company.
Now, one of the people that has connected these two places over the years
is a man whose unusual job description was Pad Leader.
His was the last face that the astronauts on the Mercury, Gemini and Apollo missions
would see before blasting off into space.
He was in charge of everything that happened on the launch pad.
He was hugely respected for his engineering rigour and fastidious attention to detail,
but also came to be loved by the astronauts and seen as something of a good luck charm
in those final, fretful moments as the clock counted down.
Why mention him?
Well, the name of this German-born engineer who lived in America
inspired the name of an American company that re-engineers German cars.
His name?
Gunther Wendt.
The company whose name he inspired is, of course, Gunther Works,
based here in Huntington Beach, California.
It is part of the ever-increasing pool of restomod companies
that use a Porsche 911 as their base.
Now, I know what some of you might be thinking.
Oh no, another drain on the ever-dwindling pool of 964s.
But no.
Gunther Works takes the later 993 generation of 911 as its base,
and then goes in a bit of a different direction.
Anyway, I think before we go any further,
we should introduce the main man behind the company.
Yeah, I'm Peter Nam, and I'm the CEO and founder of Gunther Works.
Yeah, I really started out as a BMW fan.
So, you know, I loved the BMW M cars.
My first car was a BMW Z3 that was also on the James Bond film.
And the last couple of years, I really sort of gravitated towards Porsche,
just because I fell in love with the 911,
and especially the GT3 and the GT3 RS, which really spoke to me.
I think it's one of the last few modern cars
that, you know, still have that driving engagement
and that unfiltered performance
that a lot of modern cars are lacking these days.
I really started out doing cars as a hobby.
Started out as a hobby, and it became a full-time business,
and started Vorsteiner first.
I've been doing that for the last 17 years,
and Gunther Works has sort of been the last four years.
Vorsteiner, in case you're not familiar with the brand,
primarily makes aftermarket carbon fiber components for cars.
It means Gunther Works is well placed
when it comes to its own bespoke carbon body panels,
seats, steering wheel, etc.
Anyway, back to the bigger picture.
I wanted to find out from Peter
what the aim or particular philosophy of Gunther Works is.
It's to, you know, take the air-cooled 911
and make the highest performance car possible using technology
and using the analog air-cooled 911 base
that has the driver engagement and the purity
and injecting technology into it
without taking away from the emotional essence
and the purity driving experience of the car.
The process is kind of quite the opposite
of what other people have done.
What we've done as a basis is take the original chassis,
which has two suspension mounting points.
There's an inner and an outer,
and the outer suspension mounting points
were primarily used for all the cup cars.
So the first thing we did is we wanted to square up the track
because all 911s inherently have a wider track
in the rear than the front.
So we squared up the track
and mocked up the suspension and the wheels.
And used that as our basis
and then designed the body around the square track.
Our philosophy is functional beauty.
For us, functionality comes before beauty.
Beauty is the end result of the functionality.
But for us, functionality and performance
is always the first thing we look at
before we look at into the aesthetics
and the beauty of the car.
The end result is striking,
a melding of classic and modern.
There is a simple, pebble-like smoothness to it,
but also a superhero stance
with those humongous carbon arches,
which house 335 section tyres at the rear
and, even more extraordinarily,
two 9.5s at the front.
It almost looks as though there should be something other
than a traditional 911 engine in the back,
but a flat six remains in situ.
The motor is designed by Jeff Gamroff
and I think, arguably,
he's probably one of the best
air-cooled engine builders in the world.
He's a mad scientist
and when I went to visit him,
we wanted a four litre,
we wanted to make 400 horsepower reliably
and I said, can you do this?
And he said, absolutely.
So that's really where it started.
The flat six has billet barrels,
billet crank, Marler pistons, forged conrods
and MoTeC engine management, amongst other things.
Then there are the other details on the car,
like the optional 3D-printed Inconel exhaust tips,
the notch motif that's repeated from the headlights to the dials,
the key, a wider version of the original,
just like the car,
the rear light bar,
milled from a beautiful block of acrylic
and then hand-polished.
These, as you might expect, are expensive cars,
with prices for a conversion starting at around $525,000
or about £380,000.
And even if your numbers did come up on the lottery,
I'm afraid you'll have to settle for a second-hand one,
as all the 25 build slots are taken.
Thankfully, the factory has a hack.
Its rather refined name is Greenwich,
but behind the grand title is a car
that has been thoroughly worked
in the name of testing and development,
which means I can rag it as hard as I like,
which is nice.
Hmm.
To be honest, when I first saw a Gunther Works
about probably two or three years ago now,
I really wasn't sure about them.
The look just, well, it wasn't quite there,
certainly not for the amount of money that they cost,
but seeing this one,
I think particularly this colour,
this sort of lichen green,
this sort of farrow-poole type of colour,
there's a purity about this one now,
there's a polish to the whole thing.
Things like actually this new steering wheel in here,
it feels like the final sort of 10-15%
has actually come together
and it's much more cohesive.
It makes much more sense.
It's a much more beautiful car.
Yes, it's still a little bit caricaturish in some ways,
obviously with those huge distended arches,
although I do like the fact
there is obviously a reason behind them,
but design details like the front air intake
sort of underneath those headlights,
and when you notice that it looks like a Carrera GT,
just kind of, yeah, makes more sense.
So what's it like to drive?
Well, get into it,
and in some ways it feels like
it's got all the grip of those
hugely sort of distended wide tracks.
It feels pretty heavy sort of through the corners.
First of all, I managed to grip in it.
On the flip side of that,
it also still feels like a small car.
It feels like a 993.
It doesn't feel huge and as wide as an Aventador.
There's an intimacy about it still,
which is really nice.
They've obviously worked hard on the touch points.
This G50 gearbox, this six-speed Getrag gearbox,
the throttle, it is definitely reminiscent of a 993,
but it's just so much tighter.
It's much more mechanical now,
and of course we've got this lovely aluminium shifter here
with air cools etched into it.
It's still the long throw,
so it's still got the character of a 993 shift,
but it's just got more precision.
There are obvious other 993 traits in here as well.
The seating position for a start,
so you sit with your feet canted over towards the middle,
fair amount of the steering wheels just slightly off-centre as well to the right.
The ride is definitely firm.
It feels like it's been set up for the track,
and you can get there,
but it's more track-leaning than road-biased,
and it gets better the faster you drive it.
In fact, everything really wakes up when you press the sport button down here.
That's better.
So
it's not quite Bruce Banner ruining yet another shirt,
but the switch in mapping makes a palpable change,
and the noisier nature of the flat-six seems to fit better with a pugnacious chassis setup.
This Rothsport engine really gets into its stride above 4,000 rpm.
It just noticeably changes in character.
It's really smooth, actually, as well.
It reminds me a bit of the engine in the Singer that I drove,
for its smoothness.
I'd rather prefer a bit more bike right at the top end.
I think I've experienced some air-cooled engines that really seem to be 335lb-ft of torque
with the chassis rather than the engine.
Use all the power, and then what about all that grip?
Initially, I found it pretty disconcerting, actually.
I like a 911 to be, well, a kind of 911,
and this really didn't feel like it.
It's just got so much tenacity.
The harder you push it, the more it makes sense.
You kind of really play with, dance with, I suppose.
You roll your sleeves up, it gets stuck in.
I can't think of many cars that would be faster down this piece of road.
I really can't.
There is still that 911 balance there.
A bit like in modern 911s, where you really have to go looking for that rear-engine balance.
It is there, but with all this grip, you need to dig a long way to find it.
You need a big shovel.
I actually enjoyed it more as the fuel tank emptied and some weight was taken off the nose,
as it did feel a little more 911 in its balance.
Nonetheless, this is not a dynamically delicate or relaxed Touring-style 911,
and the idea of it on a more bumpy, cambered British B-road is interesting.
The JRZ suspension is, of course, fully customisable,
so you could set it up differently if you wanted.
Maybe I'd go a little softer, but then if you're driving to a track,
I don't know, and this bit dealt with everything that's been on and on and on,
and you turn and you think, well, that must be it,
and then it just grips again, it leans in.
You have to completely run out of grip with this.
Like I said, that lap time is not because this car has really monstrous amounts of
power and torque to slingshot its 1,200kg down the straights.
It's all to do with the fact that it can apparently pull up to 3G in the corners.
So what to conclude about this car, then?
I mean, in some ways, it doesn't matter what I think,
because they've sold all 25 of them anyway.
But for what it's worth, I think it's a 911 I can see appealing to a younger audience,
an audience that's perhaps not so invested in the Luftgekühlt as such.
In many ways, this doesn't really drive like a 911,
and the look is certainly not classic 911.
It is very much its own thing, and while, no, perhaps it's not for me,
I've enjoyed it a lot more than I thought I would.
And of course, as you may have noticed,
this isn't the only car that Gunther Werks has conjured up in Huntington Beach.
It's worth getting up early for.
This Californian confection is a Porsche 911 Speedster
seen through the eyes of Gunther Werks.
Like their first resto-mod, the 400R Coupé,
this is based on a 993, the last of the air-cooled 911s.
There is extensive carbon bodywork, courtesy of Gunther Werks' sister company,
Vorsteiner, with the Speedster getting a new, lighter, single-skin bonnet,
and a new carbon dash, to go with the carbon steering wheel and carbon seats.
Most of the mechanicals under the skin are very closely related to the Coupé,
so the monstrously wide tracks remain,
as does the 4.0-litre naturally aspirated flat-six from Rothsport Racing,
putting out 435bhp and 335lb-ft of torque.
Just 25 will be built,
and I imagine they will all be going to people who live in places with a decent climate,
like California.
Talk about right car, right place.
I mean, it certainly wouldn't be quite the same in chilly Cheshire.
A car with no roof, no windows, needs weather like this.
And even then, it's not perfect.
You'll need to deploy the old Vatanen salute to keep the sun from your eyes.
I mean, I know it's impractical, but actually,
because you sit about two inches lower in this,
and because this screen, which is actually from a 964 Speedster,
really wraps around well,
you feel nicely cocooned.
I enjoyed the Coupé,
but this, this is a whole other level.
It's set up actually slightly softer,
but it just means you get a bit more 911 out of it.
Calmer on the steering,
more roll,
a bit more weight transfer to play with.
You can change the adjustable JLZ suspension
and firm it all up a bit.
It does make it a bit more precise, but I love this setup.
It's running softer springs on the front as well.
And to me, this is where it's at.
It's just more engaging.
It's more to get involved with at every bit of speed.
I don't think Underworks actually makes any performance claims in particular.
It doesn't need to, it just doesn't matter.
It's fast enough and the gearing is short enough
that you can actually enjoy the revs and the gear shift.
Now, obviously, apart from the lack of weather protection,
one of the disadvantages of this is that it's going to be,
well, a bit flexy, isn't it?
This is actually stiffer than the Coupé by quite a bit.
Thanks to extra bracing behind the seats,
the Speedster has 50% greater torsional rigidity than a 993 Coupé
and over twice that of a standard 993 Cabriolet.
And despite its extra bracing, the Speedster at 1175 kilos
still weighs about 30 kilos less than the Guntherwerks Coupé,
so it's stiff and light.
Just play with it through the corners more.
You even indulge in a bit of left foot braking.
You feel you're more part of the experience
rather than just being all grip.
You just get into a lot of control through the corners.
Some of these fabulous sweepers.
Switching between settings on the adjustable JRZ remote reservoir units
really does make a vivid difference,
but although you don't seem to sacrifice too much ride quality in the sportier mode,
the car just feels more interactive and enjoyable in its softer suspension setup.
Obviously, we've still got the huge 295 section front tyres
and the 335s on the rear,
but just with that bit more roll and extra softness,
you can kind of work with it more.
This is also running before, but I like it.
You can see from the look of it,
which I think suits the car,
a slightly softer, more rounded sidewall.
This is the gear shift.
The shrinkages and the actual shifter itself
just give a bit more weight on the top.
Smoother, that bit more to use.
Spot on.
You might think this is the cruiser.
The sound's got much more of a motorsport edge.
Just a little bit sharper as well.
The name on the sill plate says Can,
and there are pouches behind the roll hoops
that just happen to be the right size for champagne bottles.
I'd suggest Verve Clicquot if you want to colour match.
So this really does seem to set its stall out as a poser's car
rather than a driver's one.
But of course, the idea behind the original 356 Speedsters
and the most recent 991 Speedster
that came from Porsche's own GT department
was to create something more sporting than a cabriolet,
not simply more stylish.
And I think this plays to that idea.
Athleticism as well as aesthetics.
Tactility as well as tanning opportunities.
The coupe is no doubt still faster around a track,
but this must run it pretty close.
And this is definitely a more enjoyable road car.
And with this, you can take a hole through some rock
and turn it into a musical instrument.
We're up around 7,000 feet up here,
so the air is quite thin.
But this is making the very best use of it.
Listen to that!
It just sounds so good.
In the coupe, there was a lot of exhaust noise
from that Inconel exhaust.
But with this,
it's like seasoning's being added to a dish.
There's just so much more depth,
so much more interest,
so much more induction noise from the engine.
This has life to it.
Once more.
Oh, yes!
An edge!
This might be a car for the right weather,
right occasion.
It is an occasion.
I hope you enjoyed that.
Did you like the 21 by 9 aspect ratio?
Let us know in the comments down below.
And please do subscribe to Carfection
if you haven't already.
Help us get to that million subscribers
as soon as possible.
You could be the millionth one.
Who knows?
Thanks for watching.
