How to repair a drywall outside corner: prepping a patch

VideoJoeKnows
63 followers
May 19, 2026
http://www.VideoJoeKnows.com How to repair a drywall outside corner: prepping the patch has to be done before applying any quickset or drywall joint compound. Knowing how to check the existing condition of your outside drywall corner is a must before prepping the cornerbead. Knowing how to repair a drywall outside corner isn't the only thing you need to know. Have you heard the saying "it's all in the prep?"........you thought they were only talking about painting huh. Prepping the patch area needs to be completed before your howto repair, to your drywall outside corner, begins. Check out "joe". You might learn something. :0
http://www.VideoJoeKnows.com
AI Generated·May contain errors
here's the other side of that outside corner see see how high that is i'm just going to keep doing
the same thing take the mud off with my putty knife first and see what i got i'm just doing
this because it's really super high see how high that is that'll just keep my dust down to a minimum
now i'm into the little patch area and see it's man that's loose look at that
take a little screwdriver here see this here is is loose if i just patch over that
chances are the patch isn't going to last very long huh because it'll be like putting a little
band-aid over the elephant in the room you know what i mean see there look at that somebody was
just doing a cursory patch here and that's all they were doing weren't they i just now see if i
keep if i keep gouging this out i could take it out much further but i just want to go back to
where the sheetrock mud the existing mud over the corner bead is tight i could i could gouge all
this out all the way along this wall all the way up and down if i wanted to but you know i don't
have to do that okay so now i can just take this and kind of taper back the top bit of the mud right
and i can leave a little bit of the existing i want to get a little bit off that corner
now this corner there i think that's good this corner is a plastic corner bead
and it has see it's got a little flex in it see there and uh i just want to be careful because
i don't want to gouge up this corner nice straight corner see how it's got the ridge right here and
then it dips down that's where you're supposed to put your mud fill it up with your mud you're not
supposed to go over that edge because if you do then you've got actual sheetrock mud on the outside
of your corner you don't want to do that you want to get it flush with there and then when you sand
it you want to nicely sand it off you know when you finish your patch so that everything on that
corner is just the corner bead whether it be metal or plastic you don't want any sheetrock
mud over that edge okay now i can stand just a little bit on the ground here see right up in
there now it looks like the last person did a little painting there it looks like that
was actually the paint over the sheetrock mud i'll just take a little bit more of that off
yeah that that bit that's flaking up like right there see that's the paint
on the wall so whoever whoever did this originally probably should have done a little bit better job
just around this edge here huh guess i don't want to go too far
for patch remember now that's just paint up there i just want to kind of get that edge down a little
bit put the sheetrock mud on i'll go all the way up to there and fill it in there we go each patch
slightly different might take slightly different different application for here as opposed to
there keep that in mind
