Condo home renovation ideas made easy Part 78 is what this DIY howto video is about. VideoJoe is working away on the Condo renovation & I tell you the Condo renovation work never seems to end! I believe VideoJoe is living there now & he thought he was pretty much done in the garage other than repainting the walls & ceiling in the garage but no. I guess there is something else he will need to do as the powers that be want him to install something that he has never installed before. Can he do it? Of course! Watch & learn as VideoJoeShows you what VideoJoeKnows...condo home renovation ideas made easy Part 78. Nice!
AI Generated·May contain errors
Video Summary
AI Generated
The speaker demonstrates how to install R18 vinyl-faced insulation panels on a garage door to increase warmth in the garage and the room above it. Despite initial skepticism, he provides a comprehensive guide on measuring, cutting, and securing the panels, while offering troubleshooting tips for panels that bow or pull away over time.
What is our project today
We're out in the garage
It's winter now
And what do you suppose my project is? I don't believe what I just saw
I don't know how this is gonna go kaboom
See this
garage door
R18 vinyl faced
Insulation panels and Momi got this
From the store and she wants me to install it. She's I I didn't want to put any
Insulation in on the garage door. I thought what's the point?
Because we've got the we've got the door going into the into the condo and it's got weather stripping the one around it
See we've got weather stripping around this door, there's there's a
weather stripping
Underneath the door. There's the threshold there and I made sure I've got everything adjusted nice and tight
No airs coming around here, but she still wanted it
Because she has this idea that
If we get if we can keep this garage a little bit warmer
then
It's gonna keep the house warmer and I don't know if that's gonna be or not but hey who am I to question
her about it because
She's got she's got
She works out in a garage
with with
With an instructor and in his garage, it's a two-car garage and he put this
this insulation in on his
garage
And I like I say, I don't I don't know how much
Good, it's gonna do we're gonna I'm gonna get in there in a minute and do that
But you know what if you have an area like this and you want to
Work out in your garage
Or do something else in your garage?
Maybe you can put your insulation panels in there. And and here's another thing. She was thinking we've got a
Bedroom above the garage area that seems to always get really cold, even though it's got an air
heating register in there
There's not a whole lot of heat that goes in there and she's convinced that whoever installed this
sheetrock on this ceiling
That they didn't put any insulation up in this ceiling. This is the floor of the
Guest bedroom up there and so she thought if we put insulation
This is the other reason she wanted insulation on this garage door
to get
To keep the garage a little bit warmer so that
Maybe it'll keep the the bedroom up above that warmer. I'm not sure if that's all
Fine and dandy later on one of these one of these times maybe in the summer or something
I'm gonna poke a little hole up in here and see if there's any insulation up there. I'm sure there's insulation no inspector
would approve
This area being the floor of a bedroom up above without putting insulation now granted maybe it maybe the inspector missed it
Who knows and he and the other thing for the garage, you know, she's got that. She's got the
These windows up in there now
That means I'm only going to be able to put insulation panels
On these four panels and not the top. I don't know what she's gonna do with that now one thing
And I'm not even sure if there's enough for five panels. We'll see. This is all she got
From the store and maybe I'll have to get some more. Who knows I'm gonna get this open here in a minute and
You know if she if she really
Truly wants something up above we could put we could put this vinyl
Window film on these top ones so that you can't see
Through there and then install insulation around there. I really
Truthfully don't want to put insulation on those top windows
But we'll see
What's gonna happen here, okay
So if you want to see me pull this stuff out and figure out how to get this installed
That's what this video is about. Have I ever done this?
Before absolutely not and look at that. It just covers one single
Uninsulated garage door eight pieces
22 inches high 54 inches wide two and a half two and a quarter inches thick or eight
Insulation factor vinyl face this is going to be interesting to see and
We're gonna get into that in a minute
Yes, I'm probably going to be using some of these
I've got a
dust mask
Probably gonna have to put that. Oh look at that. I just I
Just tried to pull that around my ear, and it just came off silly rabbit
Look at that. I can't believe that
Let me have to fix that
before we get going and
And then I'll probably I might put some gloves on too
before I get ready to work, and I've got my my back brace on and
My knee brace on I've got a knee pad here and
All that kind of good stuff
and
You know always always kind of be ready
Look at that. I just I just tied that back on there. I have no idea if that's gonna hold now. We'll just have to
Kind of be careful with that. Oh, yeah, it's gonna work
It's gonna work, okay
so
Yeah, first thing. I'm gonna do have I like I say have I ever done this before no
I never have and
So the first thing I'm gonna have to do is pull this stuff out
And I'm sure there's some directions in here because you can't just
Put this stuff up there
without securing it
right and so
Well, we'll have to see okay. I see what she did see that comes in the plastic bags like that
for the different panels
Okay
It's got
This is probably some tape stuff
It even gives you some so little
plastic rubber
some rubber gloves
And then it gives you some some things like this, okay, so
I'll have to read the directions. I don't see any directions in here
Maybe there's some on the side of the box or something. I'm sure I'll figure it out because that was one thing
I was gonna I
Was trying to think how when you put those panels up. How are you gonna hold it?
How are you gonna hold it on the on the actual garage panels?
Without it coming down especially when you roll the door up, and it's got a it's got to be something
Here that you clip on there or do something that's gonna hold that up
And I'm thinking
I'm thinking maybe
Maybe there's some sticky on here that you peel this off put those on there. We'll see
I'm gonna have to
Do a little bit of?
investigating
here
To figure this out
All right
Let's see where we go from here
well
Here's all the directions on the back side of the box
Okay, and so I'm gonna look at this step-by-step on
figuring out
How to do this and how to get those?
To stick okay
Here's your tools needed utility knife tape measure straight edge
and that's about it and
When I cut if I have to cut any of these I happen to have some plywood here
I can set the plywood down on the ground and use my
Drywall knife on there and cut it that way, but I'll have to
Check this out a little bit more, but I think it's doable
Okay
I
Knew there had to be some sort of trick here one of these
One of these gets taped on to the door and the other
Gets hooked in like this and you push it in and then it clips
like that and that's what holds the front of the
Insulation on and now I'm gonna have to kind of pull this apart with a couple little screwdrivers and see they give you that tape
the tape
To put on the doors and so they gave us
16 or 18 of these there's 6 times 3 is 18 and
On each panel, I'm gonna put two of them so like on this panel here. I'm gonna split the difference in thirds and
I'm gonna have one there and
One there, okay, so two on each panel
there's
Four panels and four panels two four six eight
Who do we appreciate?
two four six eight ten twelve fourteen
Sixteen so I need sixteen little buttons
Taped on here, right
Sixteen and I've got I've got
Sixteen times two is is
32 and I think I got 36 total
and and I've got
18 of these so I should have two of these
left
You see what I mean? So I'm gonna man. I'm gonna measure you'll see you keep watching this video and
They give you this little piece here
This is a little vinyl piece
With tape on it and you can cut this in case you in case you do a booboo on here
Or rip it or something like that
You can put this over it and you could also get some shipping tapes and clear shipping tape
And I've got some clear shipping tape and I may end up I think I think I'm gonna put some around the edges
Is what I think I'm gonna do now. They tell you on these panels to see all these panels. There's eight panels that come
In here, so that tells me first off
There's only enough on here to go
The first four panels not the top ones and I think that's just for design and it's like
Your whole door is going to be insulated other than your top two panels. Okay, and this and this door happens to be
Happens to have a little insulation on here to begin with
That's something that came on the panels. This isn't the actual panel
The panels on that on the outside of that so so this door is already insulated that's kind of slick
That it's like that. I'm kind of liking that
But that's gonna make our insulation stick out a little bit further
Around the edges. Maybe this is this is like supposed to be two and a quarter inches thick
And see on these panels when I put the panel in
I've only got about an inch
To this and I can kind of I can kind of push it down in there
but but see this panel is part of the actual door and
You see how it kind of moves in there now
There's no way I'm gonna pull those panels out because that's like I say that's part of the actual door
So so when I get done with all this, I'm gonna have to kind of pooch it in there and I may have to
May have to put the clear
shipping tape all the way around this to kind of
To kind of hold it in there because because I got I got my my panels actually
Two and a quarter inches thick, right?
And I could leave it on the sides and let it stick out
We'll just we'll just have to see how this works or I or
In fact, it says it says to cut the panels wider than you need
And so you see on these panels here
first off
52 over 52 inches and
With the plastic the plastic
21 and a half
When I and when I come over here to these panels, let's just look at let's just look at this
Let's just look at this panel right here
From here over I got 50 and a half to there
okay, and
So, I know I can cut I can cut my my panel back a little bit and then when I measure this on the inside
To the outside up underneath here I
Got 17 and 3 quarters
And I've got 21 and so what I'll do is
On my actual plastic I may measure
18 inches, let's say and cut it 18 inches and
It tells you it tells you to measure it and cut it a little bit longer
And I may I may have to look at that make a decision as to maybe maybe I'll make a little bit more than 18
inches
18 and a quarter 18 and a half or so and then once I get the
What once I get the insulation up there
Just for kicks I can kind of have have the pink on the inside
See and then I'll pull the pull the plastic up a little bit
And then and then maybe I can take that
With some tape with some shipping tape, let's say
Possibly around the edges it tells you you don't you don't necessarily have to
Do anything around the edges? Maybe I'll just tuck it under there and let it stick out
I'll just have to see I could I could
Maybe tape it afterwards
because see if I didn't have this insulation on the door already then
Theory would have it
That I should be able to take this whole thing
And push it in like that see
Around the edge and see as I as I push it in this is to this is two inches thick
It's supposed to be two and a quarter, but I can take it around the edges
And just poke it up in there see like that
and then
Probably do that and then I could and then you're gonna have those two buttons hold holding the rest of it
But then I think what I could do is put the shipping tape
Around there around the outside all the way around. I don't know if I'm gonna do that or not
I mean they say you shouldn't have to do that this this would look really clean if I had it
Pushed up in there and see I'll cut a little bit long so I got enough room for that and then on the edges
On the edges you see I don't have anything to push it in right there, right?
On both sides. I don't have anything like that and so on on that
Let's see where I'm at okay here. We go
On that when it when it pushes up tight on
This edge I might want to measure the plastic
Just a hair further maybe
maybe I'll measure to the center of
this and
Kind of pooch the
Pooch the the insulation back and then hold that over and then I can tape that and then this will be white
all the way down this metal and then I can do that on both ends or
Something and that now that'll help hold the hold the edges
You know if you don't or you can just hold it like that and it's just gonna be pushed up like that
Do you see what I mean?
and
Think about it on
Where I want to cut that first one because once I cut the first one
That's pretty much it and so I think I think for the sake of argument in
fact
Remember that what was this? I'm gonna I'm gonna measure this again
Let's see here what we got
it says on the
Directions how long these are but see I got about 50 to 52
52 inches or so of the actual plastic area
52 and
If I look at this again
Let's just
Measure the inside measurement see this this tape. I've got this is magnetic on the end
Isn't that cool? I just hold it like that see I got 50 and a half
From inside inside
But I want that plastic
To the center, right?
And if I go center to center
over here
I'll be sitting on this post here and then I'll just be sticking over on this other side about three quarters of an inch
That's okay
So I have the white sticking over on this metal here
By three quarters of an inch or an inch and then I can have it sticking over here. So on the back side of
my vinyl
You know
before I cut this I
Could I could peel this I couldn't hold this and kind of peel this back a little bit
Then put this on the plywood then trim this a little bit off
Do you see that me if I don't want to kind of pooch it up?
Like that trim off a little bit of both ends. I could do that or I could just kind of push it in
Push it in and hold this over
Okay for the length and
So I'll have to
Decide I think I think that's what I I may end up doing it. I mean, I've got the plywood here
It's not going to take me that long to eyeball that and I'll fold that over and cut it with a drywall knife
It's nice and easy to do that
And now it's a it's a matter of
measuring
Height wise what I want to do there
To fit it in and I
think I think
See if I just measure from point to point that was like 18 inches
And then it tells you to cut it about a half inch longer than that. I
Think I'll have to read the directions on it again
And so I'll make it if it says a half inch
I'll make those 18 and a half and then I can kind of put you down in there
Pooch it up in there
So, I think I think that's gonna that's gonna work rather
nicely
you know, so
The first thing the first thing I'm gonna do is I'm gonna go ahead and put those little buttons on
I've got to do some measurements there and
Make sure I get those out
Just right. Okay step by step
You can do this. Oh
Just so, you know, I did run the door up everything's fine. You just have to make sure not to cover
To cover those if you see a hinge there or something like that. That's why that's why I notched those out of there. Okay
You don't want to you don't want to mess those up and the thing runs up and down just
fine I
Just rolled up the door see that's why you've got to have those
Things in there and stuff because when it rolls up you don't want the middle to pucker down and
Stuff and basically I just free-formed it
Cut it long and then I've got it taped at the ends. I don't have anything on the joints here here
Up there. The only thing that's holding it are those little buttons
Okay
two of them per panel
Hey, I turned out peachy
Now, why would you want insulation more insulation on your garage door?
For just your garage. Well, maybe you've got a room up above this ceiling, which we do and
If it's too cold up there, this will help it
It will and it will keep your garage a little bit warmer in case you've got a workbench out here
Case you want to use your garage for something else other than to park your car. Let's say whatever
You can install this stuff. It really
Does?
Wonders let me tell you
Yes, sir. Reed. Well
It's been a few months now since I put this on and this is probably what it's going to look like
after a few weeks a few months or
so if you cut these a little bit too
Short and
You know when I install these you remember this garage door had
a layer of
Insulation that was built into the pads
We still wanted to put this on so so when I measured this I should have measured and allowed a little bit more
height on those
So that when it when it was right here it would push in this way and push in there a little bit further
That's what I should have done and see these here it came out
Now it's not falling out all the way because these these middle things are holding it from coming out plus I taped
The end so now what I'm gonna do is I'm gonna I'm gonna go ahead and tape
I'm gonna push this up lift it up and split the difference between here and down there
So I know if it needs to be lifted up a little bit and I'm gonna go ahead and tape along there with my clear
Tape I see there's another little spot right there
I see and and not all these panels have done that see these see see how
This is gonna. This is gonna bow out and then and then go in that's because the thickness of
the rest of this
Garage door wasn't able to allow the insulation to fit down inside of there because it already had a layer of built-in
Insulation in there you see what I mean, and so that's why I should have I should have
Allowed for that and cut those a little bit longer
I'll know in the future and you know I help one of my neighbors do it and I cut there's a little bit longer and
And there seems to be fine so my loss
Is your game?
And I'll I'll just I'll just kind of touch this stuff up see there's a little piece there
So I didn't I didn't run the the clear tape up far enough
And so I'm just gonna spend a little bit of time see here's another little spot right there after I push that in
And make this all look
Really good because this pulled out it pulled away, but again the clear tape. I only ran it to there
I should have ran it up further
see and
So I do I'll do it once over on this
And I don't think I'm gonna put the the clear tape all the way along here
I mean I could
Later on if that starts lifting out some more or if the tape loosens up or something
But I I have a feeling I run a clear piece of tape there right there
At the bottom of this the bottom of the bottom of this one here too is kind of pulled away see
see there and
So if I if I finish those and that I think I'll be fine
And then I'll leave it and then you know three or four months down the road if anything
Does come out?
I'll go ahead and I'll go ahead and push this back up and use the clear tape all the way along here
Being careful not to have the tape any higher than this edge because
That's where the garage door panel stops right there, and that's where the new one starts you see I mean
And you know this insulation has really kept the garage a lot
warmer for some reason mommy seems to think that
Some of the other some of the other condo owners in here think there's no insulation above here
And then this goes up into the bedroom up above and lots of people are complaining
That their bedrooms are cold up here, and I don't know if that's the case or not this summer
I'm gonna
Poke a hole and figure out whether or not there's insulation up there or not if there's not then hey
There's a whole another video series about cutting this sheetrock out of here putting insulation up there putting more sheetrock back up
I'm gonna do that where the garage door opener is and the light fixture and all that kind of stuff, but
you know for the time being the
Mommy seems to think that the bedroom above here is a lot warmer
During the winter then not and mind you these condos are 15 years old
And you know if you're using your little garage area now
This is this is just one single garage, but if you're using a garage area like this
For your exercise equipment or or you do work
Projects woodworking projects or something think about putting insulation in your
Garage door it might just help you out
Okay, that's more better didn't take me very long
It was way like I said it's way easier to use something like that
So if you can get one of those at the store, they're way cheaper than those anyways
Retake the middle section and on the on this I decided
Not to put the tape all the way across what I did or that I pushed it in
And then I ran the tape here and then on the back side
Underneath here and then against there so like a Z
Like that
Rather than just from here over you see that mean that'll that'll keep that pushed up
I did it in three different spots
You know boop boop boop, and then I did the same thing down there
for for this panel
This panel, and then I also did it for that panel down there
retouched up stuff over here did a little
Finagling
Over there, and I'm just gonna leave it like that
I'm gonna leave it like that and see what happens after a couple months if I have to I can always put some
Clear tape this is just clear shipping tape don't get the brown
Shipping tape because then you're gonna see all the marks see what the clear you hardly see anything if you don't like the clear
You know they have duct tape. That's white you could use duct tape on
all of your joints, and it's white and
You can do it that way now remember if any of this stuff ever rips
And you need to fix it, and there's a big gap there when you get that stuff from the store
You know for that for your garage the insulation for your garage it comes
I don't know if you saw my other videos or not it comes with a little piece like this
Oh, you know what this is clear. I think I thought it was white
It looks white, but you peel it back, and then it's sticky. It's just all it is it's like clear shipping tape
That's no actually I take that back. I think you pull that off and then it's actually the white
Material then you can put it on there, and it's got sticky on the back side
And I saved I saved my extra little pieces. I rolled them up
I even saved a couple extra ones of these in case you get
those broken
You know and I even saved the little rubber gloves they gave us
For installing this I always save everything because you never know when you're gonna need it right, okay?
so there you go and
Hey
Like I say it didn't take me very long, and if you want to watch the entire video series. I'm making a video
An entire video series you know part 1 part 2 part 3
However long however many parts it took because there's lots of measuring involved
There's lots of cutting involved if you want it to look right, okay?
And I'll explain all that on details
In the entire video series make sure you watch the whole thing all right, that's it for now