Condo/Home Renovation Ideas Made Easy/Part 76

VideoJoeKnows
63 followers
48 Video Views·May 21, 2026
Condo home renovation ideas made easy Part 76 is what this DIY howto video is about. VideoJoe is almost done with the Condo renovations but he has something important he still wants to do in the kitchen. This is something any average Joe can do in their (your) kitchen too & bathrooms even. Watch & learn as VideoJoeShows you what VideoJoeKnows...condo home renovation ideas made easy Part 76. Nice!
AI Generated·May contain errors
Let's get back to this. What are what is going on here? In fact this lady right here. She wanted me we just
She got this condo quite a few months ago, and I've been showing you on the condo rehab
Renault
Episodes I'll probably put this on one of those episodes
She initially wanted all these cabinets to be pulled out one of the reasons why she wanted these cabinets to be pulled out
It's because of this
These are old-school cabinets these are about 15 15 years old and
They don't have the self-closing hinges and the drawers don't have the self the self-closing drawer
guide
deals and
She that was one of the reasons why she wanted these pulled out and I said I think I can I can take the
the little hinges these are concealed hinges, and I think I can go to the hardware store and
Simply take this out and put a new
Hinge in there, and if and if I can I asked her
I said if I can make these clothes nice and easy would it be okay to leave these cabinets. I think her answer was
Yeah, and see um
Initially she was gonna take these out for another reason too. She liked we we went to the store and she liked this
Bamboo and
Style and it and it was made from bamboo that but after I after we looked at it
I pointed out. I said you know what those cabinets after we get them sold
They're gonna look basically like this the bamboo color was gonna be just slightly darker probably about as dark as that
Up in there, and that was gonna cost. What was it gonna cost $12,000 or something?
It was something ridiculous, and so I talked her out of that and I think she's happy
I think she's happy because because these cabinets still look in really good shape right we're gonna make them self-closing I
Hope we are that's what this video is about and
But she did want the countertops replaced so of course we
Replace the countertops in the sink and the faucet and all the appliances and stuff and that's on and that's on some of the previous
Episodes so if you haven't watched any of those condo
renovation episodes
Go back because I start from the beginning on on how to do all kinds of stuff in here
Okay, but this particular episode. It's gonna be about
Installing these
self-closing
Hinges so if you want to watch that stick around
Now here's an interesting thing before I start
Taking these out you might think you might think oh hey all I have to do is take one of these out
and go to the store and
And get some what's the big deal with that or I know they're concealed hinges
So I'm just gonna go to the store and get this the self-closing concealed hinges
Do you think you can do that from the store absolutely not?
You know how many different types of concealed hinges like this there are
There's probably seven or eight
styles
sizes and and
This one happens to say inch and a quarter
Overlay, do you see that one and one quarter?
overlay
Face frame hinge and these are the soft
Clothes now at the store. They had inch and a quarter
I saw I saw some as low as quarter and then also half inch three quarter inch and one and a quarter
And I had to bring one of the guys over
From the hardware department and ask him hey
What's the difference between all these and I'm glad I brought this and the difference the difference is is how much?
Gap there is from here up to there
Because some other ones the quarter inch are just hardly anything and half inch and and so forth you that's why you've got to take
one of these
To the store with you not all cabinets are created equal not not all cabinet doors are created equal not all
installation
Areas are created equal or any of that kind of stuff
Okay, so I'm glad I took this in once I figured out these were these were the inch and a quarter ones. I needed I
Found them and you can buy a package of a two-pack and here I counted up all the doors and I have 15 doors
15 doors here. I'm pretty sure and
That meant I need I need two hinges per door. That's 30. Okay. Here's a 10 pack
And this is called a value pack
Anytime you need to get some hinges if you need to get if you need to get more than 10 hinges
You might not want to buy them in
Plastic bags of two and plastic bag. I just get five five bags
Okay, you're gonna spend more to do that than if you were to find the value pack
this is a 10 pack and I happen to get these at the Home Depot and
They probably have them at other hardware store to
Stores and you just have to kind of check around. I'm pretty sure
These are going to fit that
okay, and I saved I saved about two dollars and fifty cents per pack and
There's I had to get three packs
750 plus tax over eight dollars a pack and here's here's another thing to
Remember to do when you're at the store, I looked at the price of this these were like
2698 or something and then when when the guy rang them out or 26 48
On the on the shelf when the guy rang him up. I says how much are those?
I just want to check and and they are 46 46. Sorry 46
68
for 10
okay, and
He he ran them up 48 98
Per 10. I said that's not right. And so I went back to the shelf. I took a picture of it
I showed it to him. He even punched in the skew and the skew still came up
48
98 and I said hey, he says well, what do you want me to do?
The computer says this and I says I don't care what your computer says your your your price on your counter on your shelf
Where these are says something different. I want you to honor that price. Of course, he backed out the price
Apologize and all that kind of stuff. I
Saved my $8
Because I was I was kind of studious about how much this was going to cost because just a two-pack was over $10
so see if you buy
Five two packs for ten that's going to be over $50 for this and this cost me 46
46 40
48 and so in fact, I've saved by by doing a ten pack
I'm saving I'm saving maybe four dollars or so
Per ten pack. So now four eight twelve plus tax thirteen probably thirteen dollars
I saved because I got the ten packs if I needed if I needed eight, let's say I needed eight hinges
It's cheaper to buy a ten pack and save two for later on than it is to buy
For two packs in a plastic bag to get your eight
Do you see what I'm saying?
So always look at the store and see if they have value packs
That goes for that goes for all kinds of different things masking tape. You can do that toilet plunger
flappers or
Screws just all kinds of things cabinet cabinet handles like this
like I got some for my mom one time and
Individually, they cost a certain amount and then I saw that they had
I think there were 14 16 packs or even 18 in a pack. So I got the ones that I kind of liked and
Because they only had two or three models that they sold in the value pack and I got the ones
That best looked right and I saved a ton of money doing that on all her cabinet doors
In her house and so always look for value packs, okay
Let's talk about a couple other things before we start going. What is the deal with this?
well, here's the deal when I when I
When I install these I'm gonna I want to do everything right when these doors close
Listen to that
Even with with with soft closing hinges. You're still gonna hear that probably like that
okay, and
I'm noticing on here. There's no there's no felt bumpers. Okay, right here
down here and so I'm gonna put some felt bumpers on and
I noticed on some of these they do have some bumpers and look at this that here's a clear one and
There's another clear one up there. It's kind of discolored
You see and look at look at this. This one's not clear. Is it it's brown. It's kind of a foam type
Bumper door cabinet door silencer. Here's another thick
rubber
And it's just clear and
I may have to I may have to do something like that
I'm still I'm still kind of thinking what my options are because see here
Here's something if you have a if you have a style like this between your cabinet
Like that, okay
You've got to look and see where those are now. Now see this smaller cabinet. This doesn't have a style does it see I?
So I wouldn't I wouldn't if all of mine were like that
it's gonna make a difference then if some of them have the
style
Okay, or if some of them like see this door here. This door doesn't have a style
but it's got it's got this and and
The face frame and see how far that goes over and see where this is. It's in it's about in the middle
It's slightly off just a little bit but the screw
Right there is hitting
Right there. Do you see that?
That's what made that mark
so if I put a door silencer on here, it has to be at least as thick as that screw or
This screw if not thicker, it should be a little bit thicker than that because eventually that's gonna depress a little bit
Depending what kind of door silencer you put on and eventually this could be hitting your cabinet face frame
Or and you can see here's your cabinet face frame. And here's your style which is part of the face frame. Okay, and
You see here see where that screw is right there
Look, it's hitting right there. The other screw is hitting that
You see there
Right, I can see I can tell that it's that it's hitting so when these doors close
hard, even though
This looks like it's thicker than that if these are closed hard
depending
This could hit there and and it's it's odd how that happens because see there
it should be stuck out far enough and
You know
Maybe it is maybe once upon a time
These didn't have these and they might have had small
Door silencers on there and that might have been hitting there all the time
And then they and then they changed up and they put these down here
And I think that's probably what happened because see here's there's those foam ones
Up there. Okay, and they probably had those down here
Previous and I can see through this clear one the remnants of a foam one
That had been taken off and they decided to replace these bottom ones with just a little bit thicker and they left
Lots of those on the the existing ones
Well, I don't want to leave those existing if I'm gonna change anything. I don't want to make them all the same
You know what? I mean?
And so if I do take these off if I do take these off it leaves a remnant
There or if one of these is missing this might be all sticky
right in right in down here where the bumper hits and stuff and
Son of a gun you try to clean those off. It's hard to clean that off
And so if I have to take some of those off, I'm gonna use this
this is called goof off works the first time and
this I
Was reading on it. I really didn't like to use goof off
I I've had to take the remnants of this off before and I used goo gone
It's called and I use that that look that works really good
But I don't have any and last time mommy went to the store. She got this and I was all over
I said don't get goof off. I don't like using goof off that takes everything off lots of times
It'll take the sheen of the surface off
Whatever you're trying to do, even if you have a painted surface
or or a a
sealant surface it could take it off and you try to take marks off of carpet and
Eventually you do that use goof off and then the dirt on your shoes when it goes over the goof off the goof off collects
The dirt and lots of times it it's not good
But I was reading on this and if there's this is a new formula
She tried this on one thing. We had a sticker. We had a sticker on this brand new
appliance
This refrigerator and there was a sticker here. I was gonna get it all off with just
Elbow grease and my fingernail and stuff. She used she uses goof off and I thought don't use it. You're gonna be sorry
There's probably this is probably gonna etch or something. Well, I could see it did not etch. It actually came off really nice
I'm not I'm not
Recommending using goof off for anything. That's that is stainless steel. This is not this is finger less finger proof
finger-resistant
Stainless steel. It's not that fake stainless steel, but it's not the the stuff. That's that's really
Not shiny that's real stainless steel you just put your finger on there
You can see you can see your fingerprint on there or all the fingerprints on the doors and stuff
this is something slightly different that we got and
It came off with goof off. And so
That's what that's what the door silencers are for. But see these door silencers
I was gonna use brown by the way, because these cabinets are stained if these cabinets were white
I wouldn't use brown I'd use the white ones
Well, they had some white ones at the store, too
But I'm not gonna I'm not gonna use white on here because because the brown would look better
Although
These brown ones they're called medium see medium duty
Felt pads and they have some thicker ones, but the particular store I went at they didn't have many thicker
I don't think I can use those because they're not very thick if I put those on
Can you see if I put that on down there? It's not going to be as thick as that one and
Then the screws gonna start hitting
Right in there so I don't think I can use these felt ones and the funny thing was on these cabinets
Whoever installed them. They left a sticker up high
Up high. I'm not sure if this is this if this is the sticker up here for this or not. Oh
There. Oh, yeah
No, that's not it there's another one on there that specifically says if you're gonna install door
knobs or
Handle pulls on the cabinet doors. You're supposed to inset
The area of the cabinet pre-drill that out so that particular screw will fit flush
The reason why they said that is because this will hit your style or will hit your frame
Your frame every time that closes
see
Depending how wide your style is how wide your frame is how wide your your frame is on your door
Where they have these installed if this style here on the actual door
Would have been wider
Let's say it was would be this wide and if they centered that in there that would have missed
that screw would have missed this edge and
Then you wouldn't have that issue. Well, they didn't they wanted to try to keep these fairly centered on this style
That's what just what they decided to do had they moved this over
It might have looked funky that this this was way over here and the handle would have been way over about this far
Do you see what I mean? That might not have looked right the screw would have missed that then
but
Because because they didn't indentate that
What could I do?
I could take all of those off and take a big wider drill bit and kind of drill it in
Just the face and be real careful and then re screw that on there hoping that that screw threads
It's not long enough to where when I countersink it in. I hope I don't have to cut all of the threads
off of the screw
You know what I mean and then I could put the brown ones on there couldn't I I
Could do that or I could go back to the store
See if I can get some thicker brown was even if I could get thicker brown was eventually it's gonna mash in
So I may have to get some little clear bumpers like this and the fatter ones
Maybe take one of those off or something take it to the store because I want all whatever I end up doing
I want them all to look the same and and these are discolored
After a while, they get kind of yellowy and they're not matching the top and some of them are missing
Like I've already pointed out this one here doesn't have any on the door the door I took off
Let's take a look at that
See this top one's missing
that's just the back of the bit that fell off and
There's another one at the bottom. That's brown
And so and then there's some over here. See this one's missing
There's nothing here
That one's missing up there and so I want everything to be a hundred percent when I get done
Okay, and so that's that's another part of the project and then and then I'll I'll adjust these a little bit or something
See this one here. Look at this. See how it's loose up there
Well, I'll fix that after I take that out if you weren't taking out these these
Hinges what I would suggest is after you get done with your job or whatever
You you check all your hinges make sure they're tight. It's simple as
Tightening up that screw and if it's and if you need to raise it up or down
you undo those screws a little bit you can raise this up or down or centered whatever and
There's lots of different things you can do on cabinet doors getting them adjusted doing all that kind of stuff. So
You know when when I get done
I'll take a look at that and see see if I need to do any adjustments chances
Are I won't because because see even though I got a double door
Anytime we've got a double door if that style wasn't there the doors would would have been
Would have been closer together and then it's all about making sure
They're lined up. The gap is right and all that kind of stuff and then you can start
Adjusting these but see any double door that I have
Has the style in there and this is far enough apart that if they're slightly off
You may not notice it if they are
really far off then you can you can still adjust your your
Concealed hinges
Generally, most of them can be adjusted one way or not or another. Okay, and so there you go
Once I start I want to get it all done and I want it to look right
When I'm done, so after I put the hinges on I'm not gonna be done with this in my I'm gonna
I still have to make the decision what to do about these knobs
Whether or not to undo one of the screws because see once I once I undo one screw and drill the hole
I've got to continue if I don't like it. I can't really fix it. I have to I'd have to put a
Washer around that on the back side to get it back where I want. Maybe I take the screw out measure it and
See if I can screw it in further into here
To make sure it'll go farther so I can so I can
Take a measurement after I take that up with screw back in here
Measure the thickness of that put that in there that that far with my tape measure and then see if I can't drive the screw
in
To just the handle bit
Enough to where it's mimicking
countersinking that in and seeing if that's gonna work to see
Without the without the bumpers on these these have been off for quite some time this
Screw right there has been hitting and marking up the face frame of the cabinet right there. Do you see that?
Every single time do I really want to put a bumper right there?
I mean I could I could put a bumper right there and be done
Good night. I could put one there and one down here to mimic that. I don't like to usually do bumpers
felt bumpers or clear bumpers or anything like that on the face of a
cabinet face frame
Style like this. I don't really like to like to do that. You're not really gonna see those when the door is closed
I'm really not
Too concerned about that if I put the bumpers where they're supposed to be and at least fat enough
So I still got to decide for that
But that's that's for that's for me to mull over what I'm gonna do with that
The first thing the next thing I want to do is I'm not gonna I'm not gonna take all the hinges off or anything
I'm gonna do just the just the one door and this is the door. I took the hinge off
Before going to the hardware store and I'm gonna take the other hinge off and
Replace him replace them put it up there make sure I
did in fact get the right ones and I'm pretty sure I did and make sure it closes properly and all that that I'm
100% happy with it before I start taking all my hinges off and then finding out later
Something's gonna skew okay step by step
You can do it. Hey if I can do it
You can do it
