Blue Polka Dot Florals 💙 | Polygel Nail Tutorial | Step-By-Step

Beautiful Nails
86 followers
3 Video Views·May 20, 2026
Novagelic demonstrates a step-by-step polygel nail enhancement process, incorporating a peel-off base coat for easier removal. The tutorial covers essential nail preparation, expert application techniques for extensions, and detailed guidance on creating delicate floral art and polka dot designs using 3D gel and professional tools.
AI Generated·May contain errors
Hey everyone, welcome back to my channel!
Today I'm doing another poly gel nail set.
Here's the inspiration picture I'll be following, and let's jump right into the tutorial.
I'm starting off with prep of course.
I'm using the Sally Hansen Instant Cuticle Remover to soften and remove the dead skin
from my nail plate, which really helps with retention.
I'm just applying that around the cuticle area, letting it sit for about 10 seconds,
and then gently pushing everything back with a metal cuticle pusher to lift away that dead skin.
Normally, I would start by clipping my nails shorter, but mine were already pretty short,
so I just went ahead and skipped that step.
But if your nails are a little bit grown out, definitely go ahead and trim them first.
Once you're done, make sure you wash the cuticle remover off of your hands with soap and water.
Next, I'm going in and trimming any excess cuticle.
This step is totally optional, but I personally like doing it because it gives a cleaner overall look.
Then I'm using a buffing block to lightly buff the surface of my natural nails,
and add a little bit of texture to the nail plate.
This helps a lot with adhesion for any nail product.
You can definitely speed this step up with an e-file,
but I prefer to use a buffing block because it's a little bit more gentle on my natural nails.
Next, I'm going in with this protein prep vitamin from Sweetie Nail Supply.
This is basically a dehydrator,
so I'm just going to swipe that onto my nails and let it fully evaporate off of the nail plate.
This helps remove any oils, dust, or debris that we definitely don't want sitting on our natural nails.
After that, I'm following up with the Young Nails Protein Bond.
This is just a primer.
I'm applying a thin layer to each nail,
and this is really going to help with the adhesion of the nail products.
Then I'm going in with the Jell-O Jell-O Peel-Off Base Coat.
This product basically allows me to remove my nails without soaking them off.
It lets the nails peel off much more easily,
which I love using before doing any poly gel set,
because as you guys know,
poly gel can be really difficult to soak off.
Most of the time, you have to file it off instead,
so using a peel-off base coat is super convenient.
But if you prefer to do fills on your poly gel sets,
you can definitely skip this step.
If you are using it, go ahead and cure for 60 seconds and apply two coats.
Now I'm going to use these half cover nail tips from Amazon.
I'm sizing them out to make sure that they fit perfectly from sidewall to sidewall.
You don't want the tips to pinch the natural nail or leave gaps on the sides,
because that can cause lifting later on.
Once I find the perfect fit for each nail,
I'm just setting them aside and getting ready for application.
Now depending on whether or not you used a peel-off base coat,
you're going to apply your half cover extensions a little differently.
Since I used the Jell-O Jell-O peel-off base coat,
I'm going to adhere my tips using that same base coat,
but you can also use any gel base coat that you'd like.
I'm just applying a small amount right at the edge of the extension,
placing it onto my nail,
and then flash curing it in place under my gooseneck nail lamp for 15 seconds.
Now if you didn't use a peel-off base coat,
you can absolutely just use a regular air dry nail glue for this step instead.
Once I have all the tips applied,
I'm going to fully cure everything in my full-sized nail lamp for 60 seconds.
Now I'm going to trim the nails down using this acrylic nail tip cutter
so that they're the length I want.
I'm kind of following the inspiration picture and going for a short to medium length.
Then I'm going to start filing using my e-file,
and I have it set to around 8,000 rpm.
I'm mainly focusing on blending the extensions into my natural nails
so that everything looks more seamless.
Since I used the peel-off base coat,
I'm avoiding the area near the natural nail
and mostly filing the extension itself to thin it out and help it blend better.
I'm also lightly filing the surface of my extensions to add some texture.
This step is super important because it helps the polygel adhere properly.
There have definitely been some times where I skipped this step
and the polygel ended up lifting right off of my extensions,
so now I always make sure to take my time here,
especially around the corners and the sidewalls
because those areas matter a lot for retention.
I'm using a 180 grit sanding band for this step,
and I'm just repeating the same process on every nail.
I'm also going to pre-shape my extensions a little bit more,
mainly straightening out the tips and refining the sidewalls
to make everything look sharper and cleaner.
I'm using a 180 grit hand file for this step
just to perfect the overall shape before applying the polygel.
After filing, I'm dusting everything off,
but honestly, regular dusting doesn't completely remove the filing dust
from the Jello Jello peel-off base coat
because it just tends to cling to the sticky inhibition layer.
So instead, I like to go in with a lint-free wipe
and some rubbing alcohol to gently wipe away any leftover dust
and leave the nails nice and clean before application.
Now onto the polygel application.
I'm using the shade Corral from McCart.
It's the prettiest natural pink,
and it works really well for soft, clean-looking sets.
I'm pouring some rubbing alcohol into my crystal dish
to use as my slip solution.
I believe this is 70%.
And then I'm going in with this brush from Doper Than Your Nails.
It's a larger polygel brush,
and I personally love using bigger brushes
because they really help speed up the application process.
So to prep my brush, I'm saturating it in the solution,
lightly draining the excess on the side of my dish,
and then gently patting it down once on my lint-free wipe.
That gives me the perfect amount of slip solution
without making the brush overly wet.
And I'm going to repeat this same process throughout the application
whenever I need to rehydrate my brush.
So I'm going to start applying the polygel from the free edge
down to the tip of my extension.
First, I like to flatten the product down
and spread it from sidewall to sidewall with my brush,
keeping my brush as parallel to the nail as possible.
I'm not really digging into the product.
I'm mostly just patting and gently pressing it into place.
Once I have the polygel evenly distributed across the nail,
I'm going to focus on that middle area
where the polygel meets my natural nail,
and I want to transition that to look really smooth and seamless
so that there's not a noticeable bump between my natural nail and the polygel.
Then I'm lightly dragging any excess product downwards,
again keeping my brush parallel to my nail
and making sure that the brush stays nicely saturated
so that the polygel doesn't stick to it.
Once I'm happy with the shape and the thickness,
I'm going to trim off any excess product at the tip
and cure my nail in my lamp for 60 seconds.
Next, I'm going in near the cuticle area using a smaller bead of polygel.
I'm taking about a pea-sized amount onto my spatula
and placing it right below the cuticle area,
then flattening it out just like before.
I angle my brush slightly towards the cuticle and sidewalls
to gently push the product close to those areas without flooding them.
And once I have the product tucked around the cuticles and sidewalls,
I'm flattening out my brush again and dragging the excess product downwards
to blend everything together.
By applying the polygel in two separate beads,
I'm naturally building a nicer apex at the same time,
which gives the nails more structure and durability.
I personally find that this method is a lot easier
than trying to build everything with one larger bead,
especially when working on medium or longer nails.
Before curing, I'm taking a separate oval brush and dipping it in acetone
and gently running it around the cuticle area
to clean up any gel that may have touched my skin.
This step is really important because curing gel on the skin
can cause lifting and irritation later on.
Then once everything is clean,
I'm going to go ahead and fully cure the nail in my full-size nail lamp for 60 seconds.
And I'm just going to repeat the same process on all of my nails.
I'll let you guys watch the rest sped up.
So
once I'm done applying the polygel,
I'm going to wipe away the sticky inhibition layer
using acetone to remove any of that sticky residue.
And this is what the application is looking like before filing.
Now it's time to file and refine everything.
I'm using my e-file again and I'm setting it to around 22,000 rpm.
I'm still using that same 180 grit sanding band from earlier
and I'm working in back and forth motions across the entire surface of the polygel nail.
I also like to file in sections.
I'll usually focus on the surface first,
then the sidewalls, and finally the cuticle area.
I feel like this helps keep the shape more even
and prevents over filing in one spot.
I basically continue filing until the whole surface looks evenly etched.
That's usually how I can tell that the nail is smooth
and there aren't any uneven bumps left behind.
I'm just repeating that process until I get the shape and surface that I want.
When filing, I'm also constantly rotating my hand
and checking the nails from different angles
to make sure everything looks symmetrical and smooth.
Sometimes a nail can look perfect from the top,
but from the side you'll notice bumps or uneven thickness.
Another thing I like to keep in mind is to let the sanding band
glide over the nail instead of pressing it down too hard.
Using too much pressure can create heat spikes
and also remove too much product too quickly.
And if you're newer to using an e-file,
it's always better to go slower and build your confidence with your control
rather than trying to rush through the filing process.
Once I'm happy with the overall surface,
I'm lowering the speed to around 8,000 rpm and focusing around the cuticle area.
I'm keeping the drill parallel to my natural nail
and carefully blending everything once it lays nice and flush.
You also want to make sure you're maintaining the structure of the apex while filing.
You don't want the nail to end up completely flat
because the apex is what gives that nail strength and durability.
It helps prevent breakage, especially with longer nails.
A good way to think about it is that the apex should have a slightly natural curve to it
rather than just looking flat from the side.
Then I'm just repeating the same filing process on all of my nails.
After that, I'm taking a 180 grit hand file and refining the shape one more time,
especially around the tips and the sidewalls.
This step is super important for getting a really crisp, clean shape.
Since the nail file itself is straight, I like to keep my filing motions as straight as possible.
Finally, I'm buffing all the nails with a buffing block to remove any scratches left from filing.
You don't need to press too hard, you're just refining the surface.
The goal is to remove any file marks and make sure everything feels smooth to the touch
without thinning the nail too much.
An evenly buffed surface helps the topcoat or design apply more smoothly.
I usually buff each nail for around 30 seconds, but I mostly go by what I feel,
and once the surface looks even and consistent with no visible scratches, I move on to the next step.
I also kept the footage of me filing my dominant hand,
so you guys can see just how I do it on that side as well in case you were curious.
I don't think I've ever really shown that on my channel before, so I thought I'd leave it in.
When I'm working on my dominant hand, I mostly move my finger
and try to keep the drill as steady as possible.
I find that helps me stay more in control and avoid over filing, especially on tricky angles.
After filing, I always wash my hands with soap and water to remove all the dust,
and then I come back and wipe my nails with some rubbing alcohol or acetone.
This step is really important because it removes any leftover oils or residue from the soap
so that the gel polish applies smoothly and lasts longer.
Before I start the design, I just want to quickly show you guys the new spring collection from Madame Glam.
They kindly sent over. This isn't sponsored.
I just really liked the colors and thought one of them would be perfect for this set.
For this design, I'm going to use a fine liner brush, 12mm, to create my French tips.
I start by mapping out where I want the smile line to sit,
and then I draw a V-shape down from each sidewall.
And once those guidelines are in place,
I connect them at the tip to create a clean, sharp French outline.
Then I fill it in using the polish directly from the bottle,
and I go back in with my liner brush to refine the edges,
especially around the corners and the sidewalls so everything looks crisp and even.
And I repeat this same process on all of my nails,
line, V-shape, connect, and fill until the full set is complete.
I will say, if you want this to match the inspiration picture more closely,
I'd probably go in with a lighter baby blue or sky blue instead.
This shade is a bit deeper than the reference,
but I personally didn't mind it because I really wanted to use this color for the set.
I'm going to take this little sponge tool and lightly dampen it with rubbing alcohol,
then gently drain the excess on a lint-free wipe.
I'm not 100% sure if this step is required,
but I've seen a lot of people do it, so I just follow the same method and it works fine for me.
Once the sponge is lightly damp, I go in with a darker gel polish.
I'm using Denim Blue from Madame Glam.
This is actually one of their older collections,
but last time I checked, it was still available on their website.
I'm sponging this darker blue all over my French tip area,
and I'm keeping it lower and just focused on the tip so that the gradient stays clean.
I go over this about three times, curing for 60 seconds in between each layer.
This really helps build up the opacity and makes the blue look more rich and vibrant.
Once I'm happy with the intensity, I'm going to go in with Perfect Black,
which is a true pitch black gel polish.
I'm using a medium dotting tool.
I'm applying polka dots all over the French tips, just like in the inspiration picture.
I start with the larger dots first, placing them where I want the main design to sit.
Then, without reloading too much polish onto my dotting tool,
I use whatever is left on it to create smaller dots around the larger ones.
This is actually a really good trick.
Instead of switching between different size dotting tools,
you can just use the leftover polish on the same dotting tool to create
naturally different dot sizes.
It just gives more of an organically scattered look.
I also let a few of those dots slightly drift towards the sidewalls,
and then I cure everything for 60 seconds.
Then I'm going to create my flowers using a 3D gel in white.
This one is from a cart, and I believe I picked it up on Amazon.
I'll link everything I used in this video down below, just for easy reference.
I'm starting by taking a generous amount of the gel
and rolling it into small, evenly sized balls on my palette.
I'm making eight in total, so I have enough to build out both flowers evenly.
For my middle nail, I'm placing three of those balls where I want the flower to sit.
Then I gently press them into place, focusing most of the pressure right in the center.
This helps the petal naturally open up and keep that soft, rounded flower shape.
To form the pointed petal effect, I lightly drag each section outwards.
I'm not pulling it too far, or I'm not thinning it out too much.
I'm just doing enough to elongate the shape a little bit.
Then I pinch it in to refine the shape and sharpen it, and create that defined petal point.
And I repeat that same process on each petal until the flower is fully shaped and balanced.
Once I'm happy with the structure, I do a quick flash cure for about 10 seconds,
just to lock it in place so nothing shifts while I move on to the next nail.
Now for the second flower, I'm doing a five petal version and repeating the same technique.
Placing the gel, pressing from the center,
gently dragging outwards, and refining each tip for a clean finish.
And after both flowers are fully shaped and secured,
I cure everything in my full-size nail lamp for 60 seconds
to make sure that they're completely set and cured.
Next, I go back in with the sponge from earlier and lightly dab off that darker blue base.
And then I just layer the lighter blue over top of the petals.
I repeat this layering twice, curing in between each layer for 60 seconds.
And once that's done, I'm adding some small dot accents around the flowers using a dotting tool,
mainly around the petals and slightly towards the edges,
to tie everything together and frame the design nicely.
Then I cure everything one final time to set the design.
Then I'm going in with the GinBee Crazy Thick Top Gel,
just a small amount on my brush, and I'm placing it in the center of the flowers.
This is going to act like a little adhesive for my caviar beads.
I'm using the same brush and I'm picking up some of those caviar beads
and placing them right on top of the gel, just like in the inspiration picture.
And once I'm happy with the placement,
I'm going to flash cure them in place so that they don't move around.
After everything is positioned exactly how I want it,
I'm going to give my nails a full 60 second cure to fully set everything.
Now I'm going to apply some top coats.
This is McCart's New Top Gel.
It's very glossy and it self-levels nicely,
which is very important to use in a set like this with 3D designs.
I just go over the caviar beads and the 3D flowers and all of the nails,
and it helps lock everything in place and gives extra durability
and also prevents the caviar beads from tarnishing over time, which is a good bonus.
Once everything is applied, I'm going to give that a full cure for 60 seconds.
I'm finishing with my Lemon Cookie Cuticle Oil from Blossom.
This stuff smells amazing and I love using it at the end of a set.
And these are the finished nails!
I'm honestly really happy with how they turned out.
I think that they're super fun for summer and definitely beginner-friendly.
If you can do a French tip, you can definitely recreate this set.
I was a little bit short on time, so I didn't get to do the flowers on my dominant hand,
but even without that, I feel like this set still really pops and comes nicely together.
Thank you guys so much for watching!
Don't forget to like, comment, and subscribe, and I'll see you guys in my next one!
