The concept of how to "finish" drywall patches

VideoJoeKnows
63 followers
1 Video View·May 18, 2026
http://www.VideoJoeKnows.com The concept of how to finish drywall & sheetrock patches, is a "must" for you to understand. If you don't get this concept, of how to finish off drywall/sheetrock patches, your patch repairs will "never" come out looking like they should. Can anyone finish drywall/sheetrock patches?....sure, but what happens when you paint the wall & the "patch" reappears?......oooopps. This won't happen once you catch & understand the concept of how to patch & finish a drywall/sheetrock repair. Want to be like "joe"? Check out this video then.
http://www.VideoJoeKnows.com
AI Generated·May contain errors
Did you think of anything that you would do about this? Now there's some other plugs in this room
so there's really no reason why they've got to have a plug that close to this
wall opening you know and so I think I'm going to take that out of there.
I'm going to take that out of there and I'm not going to put a blank plate over it or anything
like that because then I'll have to cut the edge of a blank plate and put that on there.
When I get it all done with this wall it's still going to be like oh yeah you did a good job what
what's that over there you know so I'm not going to do that either but what I'm going to do
is I'm going to take this out of the wall and then I'm going to patch that plug opening right up with
some quick set and some webbing tape and some finish mud and I'm going to make that all go
away and have it look nice and pretty. Here's something important to realize when you're doing
a patch okay a patch kind of like this one here you know you can use the three inch to put the
initial tape on and the first coat of quick set then on your second coat of quick set you can go
over that with a four inch and then make your patch a little bit longer and a little bit wider
because what you're doing is you've got to taper that mud back into the wall you know what I mean
so then you use the four inch if I try to use a three inch and then bridge it out further I
could do that too on the second coat you know but if you use a four inch on the second coat
it works a little bit better that's it that's if you do enough patches pretty soon you're going to
get lots of lots of broad knives and incidentally see this one here this is my three inch my cheapo
three inch knife it's already got rounded edges because I've used it so much and a funny thing
you see the difference here see how this one's all dirty and this one's nice and shiny that's
because this is a stainless steel one and this is just a steel one this one's a lot cheaper see
how the handle's plastic it's got ridges in there and that'll do in a pinch but this one here
has a nice handle on it and an end on there and these last so much better the mud actually kind
of flows easier off the stainless steel too and what I really need to do is get a stainless steel
three inch knife as well and it won't rust like that you know you get rust on the wall
after a while and stuff like that but I usually mix up my mud uh maybe with with this one but
you know I probably should get another one okay so after the four inch the second coat of Kwikset
then you saw I used a six inch with the regular all-purpose mud and that's bridging this
over further you know what I mean and then I can use that and then I go out a little bit further
with that too and stuff but now I'm going to put a tight skim coat on there and I'm going to use
this bugger this is a 10 inch see how much bigger that is than that one six inch here and then the
10 inch and that what that's going to do is when I put that tight skim material on there I'm going
to go all the way over to about here okay and then I'm going to I'm going to build it down
further down and I'm going to go up further and that any imperfections on this wall are
going to go away because what what you're doing is if you can imagine when you put that tape on
the wall and you put mud on there that's going to you have to build it out away from the wall
ever so little you know what I mean because you've got to cover up that tape so each coat
you're putting just a little bit more on just a little bit more on and what you're doing is
you've got to trick the eye so when you look at this this wall looks perfectly flat now well if
you put a straight edge on here from here over it's going to taper down into the existing from
here up it's going to taper up into the existing it's going to taper from here down to the existing
you have to do that to blend it all into the wall and if you don't do it far enough oh yeah you can
blend it into the wall with the six inch or you can even blend it in with the four inch just just
in this area but if you do that you're going to have a bulge here because you've got to taper
this mud in this mud right here into about there you see what I'm saying so if you bridge it out
further it's that much flatter on the wall you've got to realize that because if you don't once you
paint then you're going to get you're going to see a bulge you're going to say oh yeah there's
a patch right here boom boom boom there it is you know you won't see it if you bridge it out further
okay so there's your tip when you're doing patches
