How To Make Cold Process Soap | Beginner Friendly

Handcrafted
2 followers
Ready to make your first batch of cold process soap? 🧼 In this beginner-friendly tutorial, we’ll guide you through the entire soap making process step-by-step — from mixing oils and lye safely to pouring and curing your soap.
Whether you’re starting a new hobby or looking to create handmade soaps at home, this tutorial is perfect for beginners with no experience.
✨ In this video you’ll learn:
• What equipment you need
• How to safely work with lye
• The basic cold process soap method
• Tips for getting a smooth trace
• How to pour and cure your soap properly
Making soap from scratch is easier than you think — and so rewarding!
#SoapMaking #ColdProcessSoap #BeginnerSoapMaking #DIYSoap #HandmadeSoap #SoapTutorial
AI Generated·May contain errors
In this video we're walking through the complete process of making cold process soap from preparation
to cure. Whether you're just starting out or refining your production process, this method
gives you full control over your formulation and finish. Start by carefully preparing your
lye solution. Slowly add the sodium hydroxide to the water, never the other way around,
and stir gently until fully dissolved. This mixture will heat up quickly and release fumes,
so avoid inhaling the vapour and allow it to cool in a safe, ventilated area. While your
lye solution cools, begin melting any solid oils and butters over a low heat until fully liquefied.
Once melted, add your liquid oils and stir thoroughly to combine. Allow the oils to cool
or warm as needed so that both the oils and lye solution are within a similar temperature range
Keeping temperatures aligned helps create a stable emulsion. When both mixtures are ready,
slowly pour the lye solution into the oils. Use a stick blender in short bursts,
alternating with manual stirring. Continue until you reach trace. At light trace,
the mixture thickens slightly and leaves a faint trail on the surface when drizzled.
Once you've reached light trace, add your fragrance oils, essential oils,
colorants or any other additives. Stir thoroughly to ensure everything is evenly dispersed.
Keep in mind that some fragrances can accelerate trace, so work efficiently during this stage.
Now pour your soap batter into the mould. Tap it gently on your work surface to release any
trapped air bubbles. If you'd like to add texture or a decorative finish, this is the time to do it
Leave the soap to set in the mould for 24 to 48 hours. Once firm, it should be ready to unmould,
although cooler environments may require a bit more time. After unmoulding, cut your soap into
bars. If the texture feels too soft or drags while cutting, allow it to rest for another day before
trying again. Finally, place your bars in a well-ventilated area to cure for 4 to 6 weeks.
During this time, excess water evaporates, the bars harden and overall performance improves.
For businesses, proper curing is essential. It directly impacts longevity,
lather quality and customer satisfaction.
If you found this helpful, don't forget to subscribe for more soap making inspiration.
