Vivarium Waterfall Build!

Mini World Craft
6 followers
AI Generated·May contain errors
Hey what's up guys it's Graphic Phoenix back with another video today and today you can
see behind me we have the makings of a new vivarium.
This one is bigger and badder than the last.
This one is going to have a waterfall.
So for those of you that have been wondering how do I make a waterfall in my vivarium or
you're about to start one or maybe you want to redo one that you already have.
This is going to be the video for you.
I'm going to go into some detail about lighting, about substrate and about plant choice for
your vivarium.
With that said, let's get started.
Along with going in depth about the lighting and the substrate I'm also going to be bringing
you guys with me building this the whole way through from very initial stages of planning
to the finished product.
So this is going to be a long video, sit back, buckle up and let's get started.
Before we get started on this video, for those of you that have not seen my last vivarium
build I'm going to leave a link in the top right corner of your screen for you guys to
go check out.
And that will be the build of my other Dart Frog tank.
This vivarium is a little bit smaller.
It's 12 by 12 by 18 inches tall.
It does not have a waterfall in it.
It is housing four currently.
Epidermidis anthonii, Santa Isabella's and that is also what's going to be moving into
this tank.
So like I said, if you guys haven't seen that video, please go check it out.
It goes through the same amount of detail as this one will go through.
This one will just have a waterfall.
So go check that out and let's get into it.
Alrighty, I hope you guys want to check out that video.
Right here we have all the makings for a vivarium.
For those of you that are very beginners in this hobby, I want to go through a list of
things that you're going to need before you start doing your vivarium build.
The first and number one thing you're going to need before making your vivarium is a tank.
Now there's a bunch of different choices out there.
You can pick just a standard 10 or 15 or 20 gallon aquarium.
You can build your own if you really like.
You could use Zoo Med.
I personally don't like how they only have the one door that opens.
Some people like that, but I personally don't.
I feel that when you're working with fast moving creatures like dart frogs or day geckos
or geckos in general, it's generally easier to have the two door setup that the Axo Terra's
have because you can leave one closed and leave one open.
With that being said, this tank that I have in front of me is second hand.
It is painted black.
I did not do that myself.
I kind of like the way it looks.
I'm going to keep it that way.
A few other reasons why I like the Axo Terra's is simply because they look very well put
together.
They're pretty slick.
They look more appealing to the eye than a standard 10 or 20 gallon just converted vertically.
I personally don't love those.
We don't really have any companies in Canada that make vert kits that I know of.
So them being A, not my favorite and B, not all that readily available leads me to what
you see in front of you.
So once you have your tank ready to go, whether it's a Axo Terra Zoo Med or 10 gallon kit,
whatever you want to call it, there's going to be a few things that you're going to need.
First off, you're going to need to make a base for the tank, so we'll start with the
ingredients to make that.
Now in front of you, you see black PVC.
This black PVC has notches cut in the bottom so water can move through them rather than
falling from the substrate and getting stagnant and gross and disgusting.
It moves freely through the system.
The other reason for having the PVC tubing is for support of the structure.
Now the only reason why I need these is because I'm using egg crate, which I'll get into in
a minute, and it needs support.
It won't be able to support the weight of the substrate and everything on it by itself.
So the PVC is there to provide support for it.
On a side note, if you're using the Hydroton clay balls or the Zoo Med like clay balls
you can buy, obviously you're not going to need support with that option simply because
it's a solid and it will hold up to any weight you put on top of it regardless of the weight.
So now that we've mentioned the egg crate, we'll move on to that.
The egg crate can be found at Arona, Home Depot, Lowe's, wherever you guys are.
Any home hardware is what you're going to want to be looking for.
This stuff is called egg crate, sometimes it's used as light diffuser.
I know it comes in silver, I think you can find it in black, and I have the white.
So there's a couple different options, but that's what I'm going to use to make the false
bottom.
Accompanied with the egg crate is you're going to need some sort of mesh.
It can be weed block, it can be window screen, I have the latter here.
If you're using window screen, try and get the no-see-um.
I'll put the spelling on the screen, you guys can check that out.
It's basically a finer mesh, unfortunately I didn't buy that.
So I'm going to have to use a couple layers of the window screen to prevent the dust and
debris from falling from the soil into the water portion of this tank.
So keep that in mind when you're picking through your stuff.
Weed blocker is what I'd recommend, but I just have the window screen so that's what
I'm going to use.
Now from there, the next most important thing, obviously you've made a base for the soil,
is the soil.
I'm experimenting, Zumad has just come out with a new product called Zumad ReptiSoil
and it says that it's supposed to grow plants really well, there's carbon in it, it's supposed
to be very well draining, it retains humidity fairly well.
I might end up modifying it a little bit, I haven't decided quite yet, so stay tuned
for that and I'll let you guys know exactly what I do.
It's a blend of peat moss, soil, sand and carbon.
So I'm going to be experimenting.
If you guys don't want to mess around with the substrate, I'll be going into more detail
in a second here.
So now that you have the substrate of choice, now you're going to want to be focusing on
the background and sealing the background and adding coconut core or the coconut mix
to the background.
In front of you I have a caulking gun, GE silicone 1, make sure it's number 1, and the
Aquascape Pond Foam.
This is what I have local to me, it's actually where I work has this stuff.
It's not really that cheap but it's black so even if you miss a spot in the end, you're
not going to be suffering too bad just because you don't see it as much.
Of course you can get the yellow stuff, the yellow expanding foam works totally fine.
Now the reason you want to be using GE silicone 1 is simply because GE silicone 2 has mold
and mildew inhibitors and if you go online there's a lot of debate as to which one is
better or worse.
Me personally I've been using GE silicone 2, I mean I haven't really found anything
super wrong with my frogs, they seem to be growing and doing well.
I'm not going to risk it anymore, I'm just going to be using GE silicone 1 so take that
advice for what you will.
There's also a couple things that I'm missing, you're going to need some preferably sharp
knives and serrated as well just because it helps cut through the foam when you come
down to it.
To go with the background portion I do have a Aquascape pump as well, it's a water pump,
it's going to be the feed for the waterfall obviously.
Look for a high quality pump, if you cheap out on the pump honestly you're just cheaping
out on your setup and it will not run to the best of its ability.
This pump is fairly reliable, it's used in like fountains and things everywhere, we sell
it at work, it doesn't seem to have too many problems so I picked one of those 90 gallon
per hour pumps up.
So now the fun part, now is the part where you can start looking for your driftwood,
your cork bark, whatever you want to put into the tank.
I have a couple pieces here that aren't necessarily the ones I'm going to be using in the tank
but are some that I have lying around.
You can go as nuts as you want or as little as you want on this, I do recommend having
some cork and some driftwood in a tank simply because to me it looks really nice, obviously
you don't have to though.
Regardless of how much you end up putting in your tank I encourage you to take your
time and look for very nice pieces at your local fish stores, shop around, don't just
buy whatever you see, make sure you kind of like it and it has some potential for whatever
build you're going to be doing.
Obviously you don't want to just waste money on driftwood and cork bark because I know
in Canada it's very expensive and in the States I assume it's a little cheaper, still make
sure you find that piece that you like and are ready to put in your vivarium.
Find one that intrigues you, find one that sparks some creativity in your brain and you
say oh wow I could do this or this with this piece of driftwood.
When that strikes that's how you know, you know okay you're starting to put things together
in your mind and you can see it coming together, that's how you know what driftwood or cork
bark to pick out.
There are a couple other miscellaneous things you can kind of throw in the tank, as you
see I do have a net pot here, this can be useful for some orchids if you're looking
to put some orchids in the tank, also just general planting you can foam these into the
background and they make a nice plant potter for whatever plants you're going to be putting
in the tank.
Keep that in mind when you're doing the build as well, I just have this one lying around,
whether or not I use it is a different question but it's here.
Another thing I strongly recommend is having some pill bottles, whether they're white,
clear, plastic, black, whatever, have some pill containers in the tank just for your
dart frogs to lay their eggs in, especially ranitimaea and oophaga.
The dendrobates typically will lay in the ground, like on a petri dish or somewhere
provided for them.
Something else you're going to need is lighting.
Now here I have a Fenix LED 24-7 Planted Plus LED fixture from Fenix, as I said, this is
just my light of choice, I have no idea how well it's going to grow plants but I've used
Fenix LED for all my other tanks and they are all doing very well so I trust that this
will live up to the hype and grow the plants well.
Of course when choosing light you need to consider how much light the plants that you're
putting in there are going to need, if you don't know much about plants it's time you
start reading up and figuring out how much light the plants that you need.
Some orchids don't like having super high light, a lot of orchids that go in tanks,
especially dart frog tanks, don't need super super high light, whereas some of the other
plants like high light, so keep that in mind when doing your build, it will come in handy
and you won't be spending money on pointless stuff like fixtures and bulbs and stuff and
then recognizing, oh shoot, I don't actually need them.
So now that we've covered everything that you're going to need for your vivarium, lighting
and substrate tend to be a trickier subject when it comes to vivariums, so I will make
two separate videos, I'll leave a link here and a link over here for you guys to go click
and check out more information on the lighting and the substrate.
These two videos will basically give you a much greater understanding of both the lighting
and the substrate, we'll be discussing what good substrate is, what good lighting is,
how to achieve it, and what is best for your vivarium.
So if you're curious, go check those out and we'll continue on with the video.
Now that we've gone over the basics of setting everything up, going over all of the things
that you need, going into some detail about the various different components of your vivarium,
the next thing you're going to want to do is seal all the corners.
As you can see there, I have sealed that corner with some clear silicone, it goes all the
way back, all the way up the sides, and then over across the tank.
You're going to want to seal the sides of the tank simply because there could be leaks
in your ExoTerra or any of them, I haven't experienced any leaks, but that's because
I resealed them, I don't know if any of them have leaked prior to or not, so I take the
precaution to silicone the sides.
The tube is super cheap, it's super easy to do, and definitely worth the risk, especially
if you're living not in your basement where a flood won't leak through your floors and
destroy everything.
The next part of this video that we have to address is aid crate and how to use it.
So with my build, I'm not going to go through everything, like I'm not going to show you
all that goes into building one, essentially what I'm going to do is give you the basics,
show you how to cut it, show you how to attach the weed block, what my build looks like,
and how it was built.
Now just to address a couple things, for those of you doing waterfalls, which I assume most
of you are if you're watching this video, you will need to build a chamber large enough
for your arm to be able to reach down, or for you to be able to pull the pump up.
Keep that in mind, I've made the mistake so many times where it's only like a 2 inch gap
and it fits the pump, but nowhere close to fitting my arm.
Definitely make sure to keep that in mind while you're building it.
Something else to keep in mind would be maybe have your cork and driftwood planned out,
at least whatever's going to be sitting on the base, simply so you can add more support
to certain areas, as well as building it to how you're going to want the final product
to look like.
Here we are at my workbench, otherwise known as my bed, and I'm going to show you what
you're going to need and how to cut your egg crate.
There's only two things you're going to need for this.
Some of you might have some more creative ideas.
What I like to do is have a simple pair of wire cutters, you can also use scissors if
you really wanted, and a chisel.
I don't have the chisel in here because I'm going to be doing that part outside.
This part is messy, that part's even worse, so ideally do the cutting outside if you can.
But essentially what you're going to want to do is just hold it, and you can just break
it.
And now, because it was off to the one end, you see I made a cut, you can just cut the
other end, and you got a chunk out.
You can just keep going through, and they typically launch with the wire cutters, so
keep that in mind.
That's why I say do it outside.
It's actually super easy.
Maybe just one more cut here.
Now I would simply recommend having some eye protection because this can hurt you if it
hits your eye.
So remember to keep that in mind.
I'm not going to show you how to use the chisel, but essentially what I do is just ram it up
against the side and make it flat.
It cuts off these little hinges.
You can also make it a little bit better with the wire cutters, but the chisel seems to
work very well.
You just drag it down the side, and it just chips all these little things off and makes
it nice and smooth.
As you can tell, I didn't use it on any sides of here.
I hope this helps some people kind of get their bearings with this stuff.
It's super easy.
So I'm going to start cutting this out and working on the tank.
First what I'm going to do is build a chamber for the water pump simply because it needs
to be done, and that is the easiest part.
You just make a box.
An important part for a healthy vivarium is actually air circulation.
Now a lot of people don't think of this for their first builds, but speaking from experience,
it can make a huge difference on both the quality of your plants as well as the overall
health of your vivarium.
So what you're going to need to make this is basically corrugated plastic, or I call
it H-Core plastic.
It's corrugated board.
You can see it there.
This is just a small sheet of it.
Typically you can find it at your local Home Depot or Rona or whatever you have.
Home hardware store.
For quite cheap as well as you get a lot of it.
So you can get 4x2 sheets.
You can also get like 10x4 sheets or 12x4 sheets, something like that.
That's basically what this is.
It's just cut out.
And now the whole thing doesn't fit on frame, but you can see there, this has been used
before.
Something else you're going to need, obviously a tape measure.
You want to make sure everything's accurate.
You're going to want the tape basically just to hold the shape together while the silicone,
which is here, is doing it's job and it's not going to fall apart on you.
With that being said, you're going to want some silicone, simply because this is the
stuff that will basically hold the whole chamber together in a square or rectangular pattern.
So you don't have to tape it or anything like that.
It's nice, slick, and it works.
This fan here is an AC Infinity fan.
These are the specs.
So those are the specs of the fan.
You can see it.
It is actually a USB powered fan and has speed settings.
So this was found on Amazon in Canada.
I know there's several versions in America.
If I remember, I'll throw some links in the description, but no guarantees.
Just basically look USB powered fan and this will come up, especially if you're in Canada.
If you're in the States, a different brand, but they work just as well.
So this is a 3.1 inch fan.
It will do the job.
The minimum I'd do would be about 80 millimeters.
Before we actually get started here, I forgot to mention that the PVC corrugated board can
basically be cut by anything, whether it's a knife, an X-Acto blade like I have here,
or anything really.
Basically these work great, the razor blades work great, the X-Actos work great, and scissors
work as well.
So now that we've got all of our tools together, I'm going to build the chamber and I'll be
right back and basically explain how I did it.
I'm not going to film me building it, simply because it's pretty easy.
I mean basically all you're doing is making a rectangle with an inlet and an outlet.
And there we have it.
The egg crate skeleton is done, it is finished, and it took me quite some time.
Mostly because I'm a perfectionist and I can't have any broken edges, so I've got to sand
them all down.
But you certainly do not have to do that.
This is just kind of an overview of what we're looking at.
That's obviously where the waterfall will be, it will come out of spout around there,
in cork bark, then it'll turn and come down and meet the pond.
Which is just right there.
So I think this is going to turn out really cool, I will go ahead and explain exactly
how I did it.
Basically what I did was just measured out the amount that I'm going to need and how
many squares the length of everything is going to be.
And from there I went about and cut it with wire cutters and then zip tied it all together.
You can see there's some there, one there, and then one at the bottom.
And the base here, there are the PVC supports down below which are basically reinforcing
this whole thing.
And what I've done up front is basically outlined the whole thing in egg crate on all three
sides minus the back.
Because what I'm going to do is weed block that all over and then I'm going to put ADA
Amazonia all along the front so it looks really nice and slick.
And you don't see any weed block or any gross egg crate or anything like that.
So that's my thought with that.
And essentially what I've done is just pieced together the skeleton, you cut it out, you
make it fit, and you basically make how you want it to look as a base.
You can go more advanced than this.
You can start to make the form of the background so you're not using as much foam.
But I mean to me that's not really worth it.
I'll use the foam.
I'm not going to be doing anything super crazy so I'm not going to make an egg crate skeleton
for the foam.
So that's kind of what I have for you guys.
I know it is a little bit vague but honestly it's trial and error.
As you can see that's come loose now so it's all trial and error.
You guys just got to mess around with it, figure it out, and once you do one of these
dart frog builds with one of these false bottoms it goes by really fast.
You kind of get the hang of it and oh I need to add a zip tie here and I need to add one
there and then you're off to the races.
So next time you guys see this it will be all weed blocks.
I don't think you guys really need to see that especially because this video is already
long as it is.
So I'm going to spare you the expense and we'll catch you guys when this is over.
This is the finished with the weed block and I actually put screen here just to allow better
plas flow of water because this tends to, at first it definitely is a little bit water
resistant, like water doesn't flow through it super easily.
So what I did was I put mesh, just like a window mesh on here so the water will be able
to pass through nice and easily.
The reason why the insert is not in here is because I silicone these PVC tubes into the
tank and they're just curing right now.
I did about an hour ago so I still don't trust that it's ready for the load of the egg crate.
So just to give you a general overview of the actual egg crate itself, you can see I
used probably like 30 or 40 zip ties.
You can kind of see that there, there's zip ties all over the place.
And then I put the base and the upright separately and I basically just attached them together
with four zip ties.
You can kind of see the reflection right there.
I know it's kind of hard to see but that is the finished product.
Next up we will start foaming.
Alright so here we are back again.
We actually have the tank kind of set up.
I started to foam a little bit as you can see there.
I basically just wanted to anchor in these logs because I don't want them to fall.
I have them in the position that I want them and that's the way they're going to stay.
If you notice this white box over to the side, this is actually the air circulation system
with the fan built in and that'll be going in the tank as well.
So what I'm going to be doing right now is basically just foaming the background, like
the glass part, the reflective part you see there.
I've already done some of it and I'm not going to be doing a whole heck of a lot of foaming
in this tank.
I want to leave most of it open to the frogs to have.
I've learned from my past experiences that doing the whole background or doing all the
sides can be a little bit much.
A, it's more expensive in foam and more expensive on the silicone and everything but also it
doesn't necessarily make it look better.
So keep that in mind when you're foaming.
It's super easy to do but use it in moderation.
You don't want to have a ton of foam.
You just want to make it look nice.
Now right now I'm only going to be doing the back as I said because that's all that this
orientation will let me do.
So that's what I'm going to get started and do right now.
Basically my thought process is I'm going to have this corner with like a little bit
of a landing for the frogs and then it will kind of branch off and go around and up and
I'm kind of just free balling it so hopefully it turns out well.
Was an ordinary boy
Until I broke the rules my life destroyed
I've destroyed
Until I walk awake
Scream my mind
I shout the ground shakes
How much can I take?
My mind will break
What can I take?
Can I be your superhero?
Your superhero
Superhero
It's the first time of today
So you guys have just seen me put in this piece of tree fern fiber and kind of foam
it in and then I actually use silicone to attach it to the I guess air vent but
now is the next most important part for this tank and that is trimming the foam
the reason why this is so important is because the trimming of the foam a makes
it look more natural and you can kind of carve whatever figures that you want to
be in there in there and it also kind of shapes the whole project furthermore it
actually helps with the silicone adhering to the tank because as it is
now the silicone it will stick to this very smooth fine surface but it won't
stick all that well sometimes you'll have it peeling off or not looking so
good but when you have it trim like this stuff here you can see it's nice and I
guess air bubbly the silicone tends to attach to it a lot easier and holds a
much stronger brick to it with that being said it's super easy to do you can
cut it with a butter knife if you really want I have an exacto blade here
I'll also use some pocket knives for some of the larger areas something like
this guy here and for some of the very fine details I actually have this little
Walmart razor blade to help with that as well I'm gonna kick this into a small
time-lapse here and you'll see me basically trim out this portion of the
tank
so I hope that little time-lapse gave you guys a bit of a brief understanding
of what you're to do you're basically just cutting the foam making it look the
way you want to of course if you cut too much you can always add more spray foam
or if you cut too little of course you can always go back and cut more off so
it's all an experimentation process and if you don't get it right your first
time do it over again all right so now that you've witnessed some of my carving
the tank is actually done it's done carving it's ready for siliconing so
before we start I'm just gonna go over everything that you need for the
siliconing process and go over a couple alternatives first and foremost I wear
gloves because I am one of those that put on a huge thick coat of silicone and
then basically smear it all around and then put the coconut core into it the
next thing you'll need is obviously a caulking gun unless you have a very very
small tank and you don't need the tube silicone then caulking gun will work
just fine so this is what I have it's got one of the punctures for the
silicone on it and you basically just jam the silicone on a puncture the hole
and you start going next I talked about this briefly before this is the silicone
that I'll be using this is almond color so it's kind of a I guess off-white it's
very light brown you could call it and this is the GE silicone one you got to
make sure it's the silicone one because silicone two has a mold inhibitor in it
and it tends to mess with frogs viability now I've used it on my other
tanks the silicone two and they have been producing honestly just go with the
silicone one just play safe rather than sorry now you're gonna need for my style
of doing it you're gonna need a lot of these especially for a large tank like
this I'll probably go through two or three tubs of silicone and that's a lot
keep that in mind when you're starting now the next most important thing you're
gonna need is obviously the background mixture now this is a mixture bought
from jungle jewel as you can see there is coconut husk for bark looks like some
sphagnum probably some coconut core and then there's little rocks in there as
well that's what their background mix comes with now of course you can only
use the coconut core I have some unexpanded stuff right here this is the
brick coconut core obviously you can use that I definitely recommend using
plantation soil that one works fine there's a bunch of different variations
this is just more of a I guess natural substrate background it'll provide some
places for plants to attach and grow up the back now this is completely optional
but it is recommended among many of the common ingredients in the background mix
this is actually tree firm fiber I don't know how well you guys can see that
hopefully it's focusing for you but this is it comes these are actually the
exoteric panels you can see here that I've actually just ripped apart and I
will be adding it to this mix before we start I'm going to explain how I do it
just in general and then you guys will see the time-lapse version of me doing
it I essentially add a huge thick layer of silicone and then use way too much
background and push it in push it in push it in and let it dry once it's dry
you tip up the tank everything that's loose falls to the ground you collect it
and you can use it all again so let's get started
all right guys so there's been a change of plans now I've been working at this
waterfall for probably like I don't know 15 days something like that and I mean
every time I add more silicone I have to wait a day but as you can see there
there's actually two spots where it's dripping there's one in the back back
there there's one right here basically what I've decided is I'm no longer going
to do the whole waterfall thing you guys have seen how to build on if you ever
want to build one for yourself but this is me just sharing that I'm not gonna be
running it so for the rest of the video basically this thing will be inactive
and for its lifetime with me so I don't think I'm gonna fill the waterfall up
but I think I might do something where I can just attach like foam or some like
epiweb or something like that because I can't stand this like I've given it so
much time and every time there's just a new place where it leaks like I cut out
that I silicone it I silicone all here I did everything I possibly could and it
didn't work now I'll still have this like water area down here the rocks and
stuff it's just not gonna be circulating I figured I would let you
guys know that before I move on and now we can start working on the substrate
layer so now that I've covered the fact that the waterfall won't really be
happening I'm also gonna change another thing that I said I would be doing and
that is only using the new zoomed recti soil testing it out I've decided that
I'm actually going to be adding the jungle jewel this is actually
background mix because personally I didn't really like it too much for the
background I didn't seem to stick very well for what I used so in order to use
what I have left I'm going to mix it into this substrate now the reason why
I'm doing this is both for nutrients because I know in the substrate here
there's a bunch of coconut core there's the rock so they'll have minerals in
there there'll be extra drainage all that stuff will be beneficial to the
vivarium which is why I'm going to be using it I trust that the recti soil is
gonna be good but there's a certain part of me that's a little hesitant so yeah
that's what I'm going to be doing let's mix up a batch and we'll get it in the
tank right here you can see that I'm adding one full 10 quart bag of recti
soil I'm using 24 ounces I don't know how many quarts that is of the jungle
jewel background mix and then just to top things off I'll also be adding a
little bit of plantation soil along with coconut core now as you can see here you
can see that this stuff is very fine-grained this may not be the best
for your dart frogs simply because it's gonna stick to their skin really really
well so it is very important that you have a large leaf litter a thick bedding
of leaf litter as well as what I'm going to do is top it off with a layer of
coconut core and coconut husk just so I can make sure that the frogs aren't
getting into it and that it's going to hurt them in any way so keep that in
mind when you're mixing this together and here we are a couple days later two
finals down and a hour and a half livestream to plant this tank I didn't
film anything for the video for this simply because I was live streaming it
all so if you guys want to see what I was doing you guys can go check out the
livestream I will be posting it on YouTube so you guys can go check that
out it should be up already by the time you're watching this video and this is
what I've done this isn't completely finished there's a little bit ficus
pumila up there I don't think that's gonna work there is the watermelon vine
at the very back there there is bilbergia right there there is begonia
some very large leave begonia down there we got a couple bromeliads there's a
little tiny African violet here plant right there is imported from the South
America that's what it's called then we have some Swiss cheese philodendron
there's a nice-looking vine back there I don't know what it's called but yeah
that's that's what it is a vine there is some I don't remember it starts with a
G it can be used for an aquarium plant as well and yeah so that's all the
plants we have in there oh yeah there's another type of begonia right there and
there's a crown of one right there I have no idea if that's gonna grow but I
figured I'd throw it in here just to see what happens so now really all there is
left is for me to finally do the top of this tank I'm not gonna include that in
the video if you guys want to know how I make my glass tops with the little
screen front I will make a separate video for it down the road it won't be
with this video but I will be making another video for it later I know this
is already gonna be a very long video and that can be another video on its own
so I'm gonna get that ready I'm going to basically finish off the tank you guys I
don't think really need to see it I'll definitely show you a final product of
I'm gonna top dress this because this stuff is very fine and could get stuck
there frogs so I'm gonna top dress that with coconut core and then a heavy layer
of leaf litter then I can get this tank finally up and running and have
bioactivity and all the fun stuff so all right you guys and here is the final
product so what I did with the camera off is I let some pile a girl there
there's some tortoise shell vine tortoise vine something like that and
then this is right here peperomia prostrata and then I put more pilea up
here and I also attached one of my two halves of restripia orchids right here
you can see the new growth right in the center of your screen that's what's new
with the plants in the tank and I will be getting some epiweb or something to
fill the waterfall full of and then grow more moss and vines and stuff on there
too so I'm really looking forward to that so now that you guys have seen a
little bit of the plants and stuff in the cage we can move up to the top of
the cage where we have my Phoenix LED planted plus I believe whatever I went
through in the very intro of this video there's a custom-made screen here I made
it double layers thick so that hopefully no fruit flowers will be able to get
through back there we have a custom piece of glass with a little square cut
out even though I'm not using the waterfall I still needed a square and at
the time I had this cut because I was going to use a waterfall but there's no
actual like glass or anything over there so that is kind of nice but you
guys can see here that it's all put into place everything is all siliconed in so
the front mesh is all siliconed in and the glass is all siliconed in I will
hopefully be adding a mist king to these guys I think I'm just gonna basically
like put it here I'm gonna cut a hole in the screen and build it into the cage
I didn't think ahead and get that cut but it's tempered glass so I wouldn't be
able to drill it anyways so I have my large springtail culture right here this
is kind of what I've been seating all the new cultures I've been making with
as well as what I'm going to be seating this tank with so that being said
springtails are there and basically what I'm just gonna do I'm just gonna pick up
a few pieces of charcoal and place them kind of randomly all over the place here
because these charcoal have a bunch of babies a bunch of adults over here this
is just me basically seating the tank not using a ton but I'm letting them
kind of hop off and get where they need to go so it's gonna be a couple weeks
until I add the frogs into here I'm thinking so these guys will have a
little bit of time to reproduce and start start numbsing the mold in the
tank it will kind of stay on the charcoal for a little bit there but
they'll slowly start to migrate off and and go eat some new foreign delicious
molds and growths and whatnot in the tank now what's the next most important
part of a bioactive vivarium that is isopods you guys got it right good job
so this culture here is my dwarf brown isopods they have been breeding like mad
over the last little while so I'm definitely excited to throw some in here
and watch them start a new life and it sounds like I'm like sending them to
college or some crazy stuff these are the dwarf Browns yep of course as I say
they're breeding like mad there's none anywhere flip this up hey hey what's
cracking everybody I think I'm just gonna grab a handful basically right
from the center here and just kind of sprinkle it around the tank and you guys
didn't see any of that I'm sorry you guys can see them in their bin though
look at that look how many there are in there they're breeding like crazy these
guys are doing super super well I'm super happy with these yeah well you
guys saw them in their actual tub you don't need to see them go into the
vivarium you just know that they're in there now so I'm gonna let them breathe
through for a little while before I add frogs that's true for I'm gonna let the
plants grow in a little bit I'm going to let the tank kind of establish for a
little while I think it'll end up being probably two or three weeks before I get
any frogs in here and when that time comes you guys will definitely be
brought along but I think it is now finally time to wrap up this video that
concludes it that wraps up the waterfall vivarium build really we went into some
great detail we sped through the foaming and everything and I hope you guys
checked out the kind of supplemental videos about lighting and substrate that
can be found in the description as well as at the end of this kind of outro here
so for those of you that made it to the very end of the video I really hope you
guys enjoyed this process took me about two and a half months simply because of
school and how much time it took me to actually get stuff done but this can be
a much faster process you guys can do these in like two to three days if
you're very diligent you get all the touch-up and everything all in one go so
they're definitely not too bad it's definitely not average to take you two
and a half months to do it I really hope you guys enjoyed and you guys learn
something I know I had a lot of fun building this tank the waterfall didn't
end up working out in the end but I think you guys still got the drift of
how to build the background the false bottom silicone in the whole tank
planting which if you haven't seen that like I said earlier I did do a live
stream planting kind of it's an hour and a half long and it's more just me kind
of shooting around with my Facebook friends and it was a lot of fun I really
enjoyed it so I want to thank you guys so much for watching if you liked the
video drop a like down below if you have any questions comments concerns anything
that I might not have covered definitely leave it in the comment
section down below and I will answer them there so if you guys want to see
more of my content whether it's frogs reptiles plants any of those three
things and then some definitely click that subscribe button and you will not
be disappointed thanks guys for watching I hope you enjoyed this long video
graphic Phoenix out of here
