NEW Extension ARM Dewalt Construction Jack Extension Arm Dewalt DWHT83553

The Tech Toolbox
1 follower
AI Generated·May contain errors
Hey guys, it's Al with TechMadeEasy and finally I got my hands on the new DEWALT
Construction Jack Extension Arm. Now this is going to make a huge difference for many people.
Look, I work on my own many times and having this is going to be a really huge help,
especially knowing that it can support 340 pounds, which is nice. Now in this video,
I'm going to unpackage it. I'm going to take a close look. We'll go over features and specs.
Let's check this out. So normally I start my videos with an unboxing and a close look,
but we're going to do a really close look. But right now I just want to show you how this works
and how you can benefit from using it. Now the jack itself, without the extension, the max height
is eight and three quarter inches. That's it. When you put the extension on, the minimum
is 12 inches. We're currently at 12 inches right now. Now this can go all the way up to 27 inches.
Is that insane? So let me show you something. So what I'm going to do right now is I'm going
to hold this quick release button right here, this one here. All right. To lift this,
it's really good, but to lower it, do not use that. Always use this when you're going to lower,
but to lift this and adjust it really quickly, I'm going to grab this, press the button in.
I'm going to bring it all the way up. Now I'm sorry about the camera shakage,
but guess what? That's not even all the way up. Currently we're 21 inches right now. Before we
lift this all the way up, you have one more option. Let's check that out. So how do we take
this up to 27 inches? Well, you've got some settings in between, but on both sides, you've
got two of these clamps. You're going to press this in and you can go up one, you can go up again,
and I think that is it. So we are currently, check that out, 27 inches high on the counter.
Now I'll grab my ruler real quick. Camera's probably going to shake a little bit,
but let's take a look at that. From the counter, 27 inches. Is that nice? Now the other thing
is they do give you a non-marring pad on the top. So I'll lower this and this is what this is. This
actually comes off if you're not going to use it. Now, if you're going to use it to lift cabinets,
you should use it. It's nice to have. Very nice. All right. So this is the packaging it comes in,
by the way. Obviously it'll probably be boxed when it ships out to you, but you know, it's
not in a box or anything. It's just really made to show what you're dealing with here.
Let me go ahead and take all that off real quick and we'll take a nice close look.
So there it is. And let's go ahead and start off on the top, by the way. So you do have a
non-marring rubber pad that they do give you. Don't forget though, the pad set for the jack
itself that goes on here and here is sold separately. We talked about that a little earlier.
So I'm going to take this off for a minute because you have an integrated two by four lumber cradle
here, right? So for instance, if I wanted to put some wood on this thing, again, we'll do something
with the camera here, but we crack these guys open, hold it open and we put our two by four
in place. So, you know, this can come in handy. Now you can actually screw it in if you need to,
as you can see, it does have screw holes, but it holds it very well. So you do have that.
That can be handy. Now, working our way down. If you want to extend this, well, you've got these
two on each side, right? And all you're going to do is push them both in, right? You hold them
both in and you've got one extension there and you've got another extension there. That's going
to take the jack all the way up to 27 inches, which is nice. Now this opening here is actually
where the construction jack will come through. I'll show you that in a moment. And then this
is actually where it's going to lock on. So you're going to need to open both of these
and it'll actually lock on. Let's go ahead and put this on now. Let's see how easy it is to put on.
So putting this on is really easy to be honest with you. So what you're going to do is you're
going to take this and you're going to start at the top and you're going to slide it down
just like that. Now on both sides, you're going to need to open this up to lock. So push,
it is now locked on. And then from there, you can obviously pump this up.
You can drop it, obviously using this. And this piece here, again, just be careful,
but that would be like a fast drop. So for instance, let's say I've got it up,
right? And I want to drop it quicker. I'm going to push this in and push it down.
Again, never use this as a release. So for instance, let's say it's holding a cabinet.
And you want to slowly drop it. Don't press that button. Just press this one. So pump it up,
drop it down. But now that we're on the jack, we showed you what everything does,
but let's do it on the jack. So again, if I want to raise this, I can raise that up.
If I want to raise it again, I raise it again. And again, it's still not fully extended because
I can bring this up to 27 inches. So again, don't forget the minimum when this is on is 12 inches
and the maximum is 27 inches. And then obviously a lot of stops in between, but really,
really nice to have. Now, releasing it and taking it off is just as easy.
Push in the two locks on the bottom, pull out. And all you're going to do is you're going to
slide this off and you're done. So guys, let me give you some information now. So the extension
arm MSRP is $49.99. I'll put some links in the video description, but these are going to be a
little hard to get for probably about a month right now. It is the beginning of May. All right.
Now they do make the pad set that goes on on the bottom, right? So you don't have to worry about
marring anything. I'll pull up an image. The pad sets are going for $9.99 a set all the way up to
$20 a set. It just depends on where you get them. All right. Now this does come with a limited
lifetime warranty. It is made in Taiwan. All right. And that's pretty much it. You know, again,
340 pound weight capacity, really, really adds some nice value. And I hope the video helped you
Now, before I go, I really want to take a good look quality wise with you, and I'll give you
my point of view and my perception. So let's start off obviously with the integrated lumber cradle.
So this is made of plastic. It does seem to have a decent spring as far as how it holds on. It does
a pretty darn good job. And I think we could see the springs on the bottom if I'm not mistaken.
Yeah, they're small springs still, little tiny guys. If you could see them, one, two, three,
four of those. But again, you can screw this into lumber if you need to. If you really need to know
that it's holding on to that piece of lumber, you can do that. Now, as we unlock this and move this
up, I believe this is aluminum. It is really thick though, I'll tell you. They don't mention,
you know, that it's aluminum or steel, but I'll correct myself and I'll put something on the
screen right now if I find something on the label or the website. But you do have two notches here,
pretty much. So you actually have a bottom one. So one, two, and three, as far as that's concerned.
Again, these feel like aluminum, these two pieces. This is really thick plastic,
but this feels like it's aluminum as far as the locks are concerned. And I'll be honest,
even on the bottom, when I was looking at these, these are aluminum as well.
The locks that you really rely on. So that's kind of what that looks like there. So yeah,
this is probably like some really thick plastic, but you've got aluminum or steel. Again,
I'll put that on the screen as far as this is concerned. You've got plastic up here and,
you know, you've got aluminum here and aluminum here. So nice piece, definitely going to be
helpful when it's me doing work and I need someone to hold something up. That's what I'm
going to go for. All right, guys. Well, thank you so much for watching our video. I sure hope
you found it helpful. And if you did, give us a thumbs up. We'd appreciate that. I'm going to go
ahead and put our social media up on top if you want to follow us. And you'll be able to subscribe
to our channel by clicking this round Tech Made Easy logo. Guys, thank you so much and have a
wonderful day.
