Restoration Blog: August 2022 | Jay Leno's Garage

Screw Driver
87 followers
#machinery #motorbikes #occupations #career
Jay discovers a barn find 1963 Jaguar XKE, we learn about how replacement vintage dashboards are made, and Jay gives an update on the latest progress report in this Restoration Blog.
» Subscribe: http://bit.ly/JLGSubscribe
ABOUT JAY LENO'S GARAGE
A new video every Sunday! Visit Jay Leno's Garage, the Emmy-winning series where Jay Leno gives car reviews, motorcycle reviews, compares cars, and shares his passion and expertise on anything that rolls, explodes, and makes noise. Classic cars, restomods, super cars like the McLaren P1, sports cars like Porsche 918 Spyder and Camaro Z28, cafe racers, vintage cars, and much, much more.
AI Generated·May contain errors
Welcome to the episode of Jay Lone's Garage Restoration Blog. Something very special today.
Two days ago, literally two days ago, a policeman we know in the neighborhood came by and said,
hey, old guy up the street died. He's kind of a hoarder. I think he has a car in his garage.
I said, let's go take a look at it. About a mile, a little more than a mile up the street.
The house looked like it'd been abandoned. It looked like a hoarder lived there, overgrown,
paper, newspapers in the windows, that kind of stuff. We opened the garage door. Here's the
picture. Here's what it looked like, as you see. This guy was a hoarder, just stuffed with
everything. Water heaters, saved everything. Well, who saves all water heaters? Everything.
Blankets. He says there's a car under there. I don't know what it is. All right, let's start
to peel away. Here's what we found under the water heaters. 1963 Jaguar XKE. Not just any Jaguar
XKE. This car has 17,187 miles on it. This is just as we pulled it out of the garage. We haven't
taken the dirt off. We're going to clean this up over the next couple of months and get it running.
It hasn't run in 50 something years. It was parked in the garage in the 70s. The guy bought it new.
It's a one-owner car. Being under all the blankets and the water heaters really protected it
because there's no body rot on it. There's no corrosion. The interior looks brand new. Let's
open the hood up. I'll show you something interesting. Everything is exactly as it
should be. It was just put away wet, I guess you'd say, and sat for 50 years. It is a
not brand new but pretty close to brand new. It's about original Jaguars you're going to find.
Here's something that really makes it original. Come around here, I'll show you.
You see it says right there under the wing 5936. That was put on by the factory. Those are the
chalk marks they put on. The same marks are on here and you see them and other parts,
which means this thing never got wet enough or corroded enough for those things just to wear off.
This door is a little frozen. On the trunk,
all the original books. You have the original Jaguar tool kit. This is the tool kit you got
with it when you bought the car brand new. I mean all the little bits and pieces are here.
This guy bought this car, drove it, and then just parked it. Most people don't even know what this
is. This came with every Jag and the tool kit. This is a Dunlap disc brake. It's a bleeder hose
to bleed the brakes. This was part of the kit you got when you bought the car. The original
jack is in here. If you go on eBay and you see what they're asking for XKE Jaguar jacks,
it's crazy, crazy money. It's pretty amazing. This color is unusual.
Using all of our products that you may have seen in the last restoration blog,
we're going to try and bring this paint back. The first thing we're going to do
is cogmetically clean this car and see how good we can get it. I think this is going to be
a preservation car. We're not going to turn it into a show car. We're not going to repaint it
because it is so original. That's what makes it really exciting. This might be the lowest
original mileage XKE around. I certainly haven't seen one. I'm sure in England at the factory or
there's somebody XKE club that has one. Just to find something like this, that's the fun thing
about living here. Lockheed Martin Aircraft was right across the way. There were so many engineers
and airplane guys that lived in this area that all these garages around here just have some
interesting stuff. Amelia Earhart lived right down the street. Her Franklin was there. I bought a
1927 Duesenberg out of a garage 15 years ago that was parked in 1945. The garage had not been
open since then. This is the same thing. This was parked either in the late 60s or early 70s.
I passed that house every day almost on my way to work. I never thought or knew what was in there,
but this is what was in there. All the original pieces are here. Come around. Let me show you
the interior. The interior is probably the most amazing part. All right, take a look at the
dashboard. Take a look at the steering wheel, the door panels. They look, if not brand new,
pretty close. There's a little bit of tear here in the stitching, but that's it. This
leather is still pretty supple. They covered it in plastic and the whole thing was just covered
in blankets. Even that aluminum tray, that changed in late 63, early 64 to a leather piece.
I always liked that piece of aluminum and most of these you see it's all scratched and cut up
because of watches or rings or people put things on there. It still looks almost brand new. It's an
amazing car. There's no rust. The doors don't sag. Look at that because they've been
shut for 50 years. I think this paint will come back. I think this is going to be a pretty color
once we get it. You know, most of these are white or red. I mean, this is an unusual color.
It was ordered in this color with the tan interior. Really something kind of different.
This is going to be a pretty exciting honor. Those are the original tires.
When we dragged it out, it had four flat tires. We put some air on them. They hold air.
Obviously, we're going to change the tires at some point. The original radiator, those unusual
finned radiators like that. Most have some modern aluminum unit, but that's as it was from the
factory. So it would be a shame to restomod this car or even restore it. This is a case of
preservation, especially anybody who has a Jag and they want to know, well, how is it done at the
factory? What kind of fittings did they use? Well, you can look at this car as your guide. You see
all these little hose clamps and everything here. That's what makes it pretty amazing. I'm sure it's
going to need a new brake master cylinder, clutch master cylinder, and some other pieces like that.
But I think this is going to be a really exciting project. Well, here's where we are now about a
month or so later. We still are not taking the original dirt off the car or clean the original
top. How many cars from 1963 still have the original top? You know, the fun thing about
finding something like this, it's perfectly preserved. You know, a lot of times when I see
Jags at a show and they're all beautifully restored, they just have the wires going directly to the
plugs, but they forget about this piece. This is an original piece that when the cars are built,
it's called the ignition wire conduit. It's a fiber-like material that is extremely brittle
and usually breaks. And most people just leave it off. There's no reason to have it. Well, I suppose
there is. That's why it was on there in the first place. But most people just ignore it and, you
know, have the wires or some other kind of loom to hold it. So you just have an original piece like
that. This is one of the few pieces where you replace this overflow tank up top here because
this thing was just driven in the garage one day and shut off. You know, it wasn't drained,
wasn't pickled as they say. So at least, well, you can see all the rest. So we've got a new tank on
there. So we're just replacing as necessary but trying to keep it as original as possible.
You know, my friend Myles Collier wrote a book called The Archaeological Automobile
and it's about preserving cars. You know, back in the 80s, I guess when I really got into this kind
of stuff, 70s and 80s, the idea was to make it look brand new, look better than new. You know,
Pebble Beach and people have tweezers and they're pulling blades of grass out from between the treads
so the car looks perfect. The idea I think nowadays is to just sort of preserve it as it
was because like they say, it's only original once. And it's fun to drive a car like this
exactly as it left the factory. You know, a lot of times people put way too much horsepower in them
and change everything and I'm as guilty as that as anybody. But you realize modern cars are so fast,
it's not going to be faster. So why not put it back to the way it was originally?
The one change I am going to make is a little wider wire wheel to get a better tire on it,
just to make it handle a bit better. Right now, we're pulling the brakes out.
Obviously, we replace pads and brake cylinders and, you know, brake hoses and stuff in the
interest of safety. In fact, you look at these bugs in the radiator, these are all 50 years old.
And this is the way the radiator was done in the factory back in the day. I'm not even sure you can
these anymore. Everything else here will be cleaned, like the gold cylinder head, that's
the way they came. This, of course, is a 3.8 liter engine with the Moss four-speed gearbox, no sync
rowing first. You know, once you drive this, you realize 1963 was a long time ago. But look, even
the headers here are not all cracked from heat distortion or anything. What usually happens is
water comes in through the vents in the top and, you know, just kind of, well, it just cracks
everything. You're pouring water on a hot engine. But since it doesn't rain that much in Southern
California, we don't have that problem. Come on around here to the back, I'll show you the
rear end we just pulled out. As you can see, we pulled the rear end out of the car just to go
through everything. Opened up the differential. What a pleasant surprise, almost brand new.
No wear marks, nothing. I mean, it was 17,000 pretty easy miles, not like the guy race this
thing. We're not going to paint anything here. We're just cleaning it up, as you can see. But
look at this, everything is nicely done. There's no chunks out of it. There's no, nobody's beating
this with a hammer, you know. So just clean it up, replace gaskets where necessary, obviously
change the fluids, and then put it back in again. The idea is to get it back on the road as good as
it was the day it drove into the garage back in 68. So that's pretty much where we are. But
the wonderful thing about this is there's no rust at all here. The only rust was that, as I said,
in that water tank, because obviously it's filled with water. But look how clean it is in here.
Original paint. Look at that, important. Disconnect battery before removing cover. There you go right
there. Even the gas tank looks pretty good. We did have a problem with this door,
but now it's fine. This door wouldn't open, it was just frozen. But taking it apart, a lot of WD-40,
and now it seems to be fine. The interior, as I said, looks, not brand new, but boy,
looks pretty new. It doesn't, it looks like it's probably five or six years old as opposed to
50 year old. That's pretty much where we are with this. We'll keep you updated. This is going to
take, this is going to take a while because we've got a lot of other projects. Across our, it's
right next to our Detroit Electric right here. We're hoping to have this done in, well, about
another three or four months. I think I've showed you the, yeah, we haven't moved a whole
lot since the last one. We've had other projects we've been working on. Come on, let's show you
some more stuff. This is a 57 Cadillac. Last time we saw it on the restoration blog, I think it was
probably in the paint booth a while back. I got to check and see. As you can see, the paint has
turned out beautiful. Interior's in. The only variation from stock under the hood is obviously
a modern Optima battery because they don't leak and they don't, you know, they don't, the gases
don't rust out the hood or ruin the pattern like that. And a modern air conditioning system. That
is a vintage air. We use them almost exclusively here and everything because they fit in any car
we have. We can get a vintage air unit in there to keep it cool. And it really makes it a pleasurable
car to drive because it saves the interior. The windows aren't open all the time and dirt blown
in. So that works pretty good. We're going to do a road test on this one very, very soon. We
finally got it running. Took it on initial road test yesterday. Brakes aren't gripping the way
they should. We got a problem there. A couple of misfires in the engine. But something I want to
show you that's really great. Okay, this is probably the biggest problem when you have an older car,
especially from the late 50s or early 60s. The dash. So many times I go to car shows and I see
the car is beautiful, but the dash has got some kind of matching duct tape over the crack from
the sun, you know, the cracks and all that. Or they're just sort of warped from sitting outside,
whatever it might be. And where do you find one of those? I got just the solution. The place down
the street being called Just Dashes. It's amazing. We bought the 442 in there because the 442 was
beautiful. Everything was great on it, except the dash was just kind of cracked and it just didn't
look good. But where do you find a dash for a 66 Oldsmobile 442? Well, you can get a brand new one.
Here, take a look. Hey, Erwin, how are you? Hi, Jay. Jason, how you doing? I'll tell you why I love
this place. See, I like people who specialize in this stuff. Like my favorite hamburger place is
In-N-Out because all they sell are hamburgers. No burritos, no chicken sandwiches, no nothing.
You guys are just dashes. You've got a dashboard they configured because that's probably one of
the most frustrating things about restoring a car. You can do all the mechanical work and the body
work, but a dashboard is almost beyond anybody, certainly a home person working out of their
garage. It's almost beyond their capability. So let's start. This is a typical dash right here
that comes in? This is a 1973 Trans Am Firebird. Okay, that looks pretty bad. Now, is that just
a car sitting just out in the sun outside? What's the story? You don't know.
Any given dash, we're not really sure the entire story. A lot of them are family projects. A lot
of them could be concourse restorations. Whatever it is, we were able to... Well, you might remember
on my website where I had a 66442. The car was beautiful. Everything was done except the dash
didn't fit right and had some cracks and nothing we could do about it other than putting black tape
or trying to fill it in or, you know, just I love to see that thing. You guys love that.
That's right. And I brought it to you guys and it looks like a factory piece.
Yeah. I mean, it's as good as a factory. So where do we start? How does the process work?
Do I call you up? I tell you what I have and can you make just about any dash for it? Just about
anything between 60 and 2,000. Oh, okay. Cool, cool. Yeah. So what, I pack it up? I send it to you?
Most of our clients will either bring it into us, ship it into us. Yeah. We try to keep that process
as simple as possible. As long as you can get it here, we'll take care of it. And what part of the
original dash do you use? Just the metal pieces and everything else is replaced? How does it work?
A lot of these dashes will have some sort of plastic or metal substructure to it. Right.
What we're going to be doing is stripping off a lot of the old ratty material and restructuring
that with brand new foam. Okay. But the first process is to make sure that the structure of it
is sound. Now, how does that work? Do you have molds for like Trans Am, Camaro, Mustang, or
is each one pretty much you start from scratch? Everything is hand built. Wow. We use very,
very few molds here. Everything is hand structured so our craftsmen really know what they're doing.
Oh, okay. Yeah. All right. So, so where do we go here? Let's see. Did you just unpack this? This
came from somebody? This has been sitting around for a little while, but we try to get to things
in a timely manner. But yeah, this is essentially how it came out of the box. We have not touched
this thing yet. And it really doesn't make a difference whether it's just a little crack
or whether the whole thing is shot because you have to do the whole thing anyway, right? Yeah.
It's all one piece, so it's not like one that's totally trashed is going to be the same price
really as one that's... Yeah, there's some variations, but for the most part, we've seen
pretty much anything and everything. Right. And as long as the structure itself is good,
the skeleton or whatever, what do you call it? Skeleton of it? Substructure. Substructure. Yeah.
As long as that's in pretty good shape, you're okay. Yeah, pretty much. All right. So now,
where does it go from here? Can you show us the next step? Yeah. So what we'll do is kind of
specifically for these, we get a lot of these. We have about 20, 30 of these in the building right
now. And what we're basically going to be doing is putting blockouts to rebuild the radio areas.
Really common that these were cut out for single din radios. Right, right. Over the years. Go down
to Ed and Al's Auto Sound. Yeah. So we have 3D printed parts for radio areas, steering column
areas. I got it. And we can pretty much replace anything on this one because it is so common.
And how much of it is one piece? I mean, that whole, except for... It's all one piece.
It's all one piece. Okay. It's all one piece under there. I see. So sometimes these will come in,
someone doesn't brace this thing, it comes completely obliterated. Right. And, you know,
costs a little bit more, but we can do the structural. And you have replacement substructures
as well, I imagine. Yeah. If we really... Totaled situations, we'll suggest just replacing.
And what's the easiest one to do? GM? Like a 67 Camaro. Yeah. It's just a little thin pad right
at the top of the dashboard. Right. And there's not much to it. A 70s Dodge Dart. Yeah. It's just
thin and it comes down on the sides. The more complicated ones would be like a 59 Cadillac.
Right. Okay. That's a lot of chrome. Right. Do you do the chrome pieces as well or just the...
We specialize in the foam shaping and thermal vacuum forming aspects of it. Rechroming metal,
leave that to the experts. And what's the most common problem? It's been sitting in the sun and
the foam dries out. And because a lot of times they're not torn, they're just warped, I guess.
Right. Yeah. So over time it dries out and part of the drying out process is the foam degrading
underneath and it just starts chipping away. So you can kind of just snap it like plastic.
So you probably recommend keep one of those reflectors in the...
Yeah. Especially if you live in California. Or don't, because it's good for business.
Or don't. Yeah. Don't want to use that at all. Yeah. Don't be too protective over it. You want
people to see your brand new dash, but my dad has always said, keep it clean. That's the best
thing you can do. Well, it's a great business because I talked to guys back East and you guys
are the only people in the country that really do this from what I can see, which is great.
So what's the next step? Okay. You get a guy from New Jersey sends you his dashboard. What do you
start tearing it apart? Is that the next thing? Yeah. So after the substructure supports, we
take it over to foam shaping. This is over here? Yep. And we structure the whole thing. So after
we've torn down the old foam, what we do is we restructure it with a high density two-part foam.
Okay. Is that similar to what they use back in the day or is it different?
No, this is a bit of a different process. What they used to do is injection foam molding. So
they'd have these big casts that they'd be able to plug in all these different tubes into. And
then you get this spongy type of foam that just degrades. And we went to a closed cell foam
a few decades ago. Yeah. Well, you started the business, right? Right. So what year did you
start? 1981. Oh, 81. Okay. People think you're crazy at the time. How many people need a dashboard?
I mean, did it seem unusual to people? Well, that's how I started the business. I had a Datsun
240Z with a cracked dash and they all had cracked dashes. Yeah. And nobody knew how to fix it. And
it went around all over Southern California looking for someone that could repair my dash.
I couldn't find anyone. So that's when I thought, hey, this is a business I can live with. I was
always a car enthusiast. Yeah. You're like the guy who said, I liked it so much I bought the company.
And you're right. There was nobody else doing it. Right. Yeah. Oh, that's cool. All right.
It's okay. Now you've got the foam. Well, what's the next step? So after we've laid down the new
foam, from there it's all grinding and shaping and getting back to that original factory shape.
And how long does it take to form a dashboard and do the whole deal? It depends on the type
of dash, but it could go anywhere from eight hours to 40 hours. Okay. So it's pretty labor
intensive. Yes, very much so. Okay. So it's actually, so there's no mold. You're actually
shaping it. Yep. It's all, it's all hand-shaped work. So we have people who've been with us for
30 years. And they just sort of know by osmosis, I guess. Yeah. We have a lot of samples. We have
a lot of schematics to go off of. And we have a lot of skilled people doing it. Do you still have
that Datsun? Yeah, it's out in the parking lot. Really? It's still got the new dash? No, I sold
that one, but I replaced it with another one. Oh, okay. Very good. You put a new dash in that one
too? No, it's got an original dash. Wow. One of the reasons I bought the car. Right. Oh, okay.
Cool. Cool. All right. Very good. Okay. So what's our next step? So after we've done all the
structural repairs to it, we get a nice thin sheet of aesthetic foam and that will give us
a nice cushion. Okay. Let's see what that looks like. Where do we go for that? Over here? Right
over here. Okay. So what do we have here? So this is another Trans Am dash where we're just in the
final phases of putting a very thin sheet of aesthetic foam. So it'll have a nice cushion.
Okay. When it's all done. It goes over this part here? Yeah. It's really just there to kind of
smooth out some surfaces and give us that spongy feeling at the end of the job. Are almost all
dashes black? I guess they are. We can make them whatever color you need. You can do colors. Oh,
yeah. Yeah. We can make them whatever color you need them to be. And yeah. What color do you want?
Well, black is fine. They all seem to be black, but then I guess I've seen older Cadillacs have a
blue or. Right. And sometimes they have like a metallic flake in it. Right. Right. We can,
we can do all that. Oh, that's pretty cool. Okay. Yeah. All right. So this one is a matter of laying
and how does that go on? Is it, it's not, it goes on as one piece? Yeah. Right behind you is. Oh,
here it is. Oh, here. Yeah. Okay. And you can see, so it does have a little bit of a. Yep.
So we. Cushion. Yeah. We'll take, we'll take a lot of that off. So we get as thin as possible.
So you put it on and like sort of strips or. Yeah. I mean. It's not, obviously not one piece
it's cut to fit. No. Most of it's one piece. Oh, yeah. We use heating and stretching to
get it on in one piece. Okay. All right. Very good. Now where do you go from here?
From here after foam shaping, we'll check out the vacuum former. Let's check out the vacuum former.
Okay. How's this work? What do we do? So with vacuum forming, it's really important that the
material itself gets to a nice, even hot temperature, right? So this is going to back
up into the oven here. And as dirt, it gets hot. It comes out here. Trans Am dash is going to come
up through the vinyl. Okay. And then it's going to get drawn out. Oh,
now where did this machine come from? Did you guys have this purpose built or
did it exist and you bought it? How does that work? Did you design?
No, it was made by a company that specializes in vacuum forming machines and they built it
to our specification. Oh, I see. Okay. So you built it obviously just for that.
They were very confused with the request.
So the vinyl is going under the. In the oven. In the oven. So it'll take
about 10, 15 minutes for it to heat up and then we'll pull out the pizza. Maybe next year.
And how old is this process of vacuum forming? Oh, since we had an old machine. Okay. The first
machine that we used that was built in 1947. Oh, okay. So do you know how old the process?
That's about how old the vacuum forming process. Oh, that's great. Now the water is just to cool
it. Right. To cool it down real fast. There it is. All right. Dumb question. It's just regular
water. It doesn't need to be distilled or anything like that. It's just regular water.
Like foreign cars used to be on a purry. LA's finest.
Wow. And now it looks like a dashboard. Yeah. We're 99% there. Okay. Just a little bit more.
And that's great. It looks, I mean, it looks a lot to do with the factory, isn't it? Right. Yeah.
Right. Very good. Now what happens? We let that cool for a little bit.
Yeah. It needs another minute to cool and then it'll go into trimming and repairs.
And is that the final step? Final step will be the paint department. Oh, paint. Okay. Yeah.
Now, what do you pay? Oh, because unless they want a different color. Yeah. Even with black
dashes, we'll give it a little dusting because you'll see that there's a little bit of a sheen
to it. Oh, I see. So, so you actually paint, that's not, you don't use a different sort of
material that's a color. No, no. All the vinyl, all the vinyl is black. All the vinyl is black
and then you paint it. Yeah. Is it hard to paint? I mean, they got a light blue color on,
on black. Is that tricky? A few more coats. A few more coats. Okay. Yeah. That vinyl is
designed to be painted. Right. And, uh, at the factory, which I was at the factory,
uh, years ago, they paint every piece of vinyl that comes out of there, even if it is black.
Right. Because it has this gloss to it. Right. Gotcha. Gotcha. Wow. That looks incredible. It's
now just a matter of trimming and kind of shaping it a little bit. That's very cool. Yeah. So what's
next step? Trimming. Trimming. Yeah. We're going to trim the excess vinyl from around the, uh,
perimeter of the dash and fit all of the, uh, openings, the vents, the vessels. Oh,
let's go over there. Check it out. Oh, now the high tech part. Yeah. A lot of hand labor stuff,
more than I thought actually, but this is a high tech 3d printer. Look at that. Yeah. We're starting
to see these parts coming in worse and worse shape. And we're kind of preparing for the
inevitability that we start running out of them and we need to start making our own. Right. So
are you making the substructure here? Is that what you're doing? We're going to be able to do
a lot of different things, substructures, full dash pads, um, coupled with the thermal vacuum
flooring process. We can make just about anything with this. Well, I can't thank you guys enough.
People have their own shop. Like I do. We say, we restore a car. We restore as much as we can.
Then we rely on guys like you guys to really give it that really factory look. And, you know,
you can't make your own dash at home. You just can't do it. Thank you so much for having this
business because you really save it. I mean, this is something that probably seemed crazy when you
started it. You go, how many people want a new dashboard, but are you surprised at how big the
business has gotten? I am. Yeah. And I'm surprised that, uh, of the longevity. Yeah. Did you ever
think, oh, I might have to get a real job someday? We'll be able to do it. Many times. Yeah. That's
funny. Well, no, I think you're going to be around a long time because it really is. It really is
great to be able to give something that factory finished right off the showroom floor kind of
look that you can't duplicate. I mean, you can polish and wax and paint, but you can't do that.
And that's, what's really good. So thank you gentlemen. Thank you. Really appreciate it.
Really appreciate it. You need a dashboard place to go. You know, we inquire cars in interesting
ways. A lot of times people have a car they love, but the engine's blown or it's in
sad shape. They don't know what to do with it. So they called me and asked me if I wanted it.
And that was the case with this, uh, a 1974 TR six triumph body's all there. Pretty nice shape,
not too bad, but the engine just needed everything. Valves were bent. The cam was worn
out. Yeah. So we pulled the engine, went through the whole thing, uh, putting it back to stock.
Uh, it did a slight touch up under the hood here with matching paint. So it's going to be a great,
it's going to be a great runner. Great car to just take out in the hills and drive around
and run some errands with. It's not going to be like a, you know, a hundred point restoration
like that, but it'll all be stock. And, uh, well it's running now. We just got a few more things
to do with this and we'll do a full, uh, you know, road test and everything. And this one,
when it's done, we'll feature it under the light box and do all that. So I'm just showing it to
you now is it's sad for about two years. When I got it, it just seemed overwhelmed me at so many
other broken projects. So we finally got around to it and we're ready to go. Come on, let's move
on to the next thing. Well, this is the front clip to the 63 XKE we just looked at. Uh, we took
it over here because he wanted to try and see if we could bring this paint back. Notice it's still
got all the 50 area at a time using some of the products we developed here at the garage, the
general car care stuff. I'm trying to bring back this color. This is called opalescent sand. Uh,
this is primer under here. I guess he scraped it or something that somebody did in the garage,
but I think this can come back. You see, it looks okay. It looks nice there. It looks nice. So, uh,
we're just doing one little area, just trying to see if it is salvageable and it appears to be
obviously when we're done, we'll probably still have that scrape there, but that's okay
because this is going to look like a five-year-old XKE from 1968, you know, and that's kind of what
we wanted to do. I just want to keep it as original as possible, which can be a real
challenge because when you can buy stuff like that water tank, the, you know, I, I'm replacing
that because there's so much rust inside. It'll just eventually work its way into the engine.
You know, we're so fortunate that the 63 Jag was here in Southern California because it didn't
rust at all. It was that overflow water tank. Uh, this, this all looks good. Um,
I'm thinking we can bring this paint back. Uh, so that's what we're hoping. We're just
doing one little section of the time. Uh, you know, it's fun when you develop your own products
because you know exactly how much damage they'll do or how little damage they'll do. And so when
we know what's in the product, then we feel safe to use it on the vehicle. And that's what we're
doing here. Just, you know, preservation is almost in some ways harder than a restoration
or restoration. Just replace it, you know, so many parts available now, but it's fun to be
able to keep it as it was in 63. Now, another project that's been down for, oh man, three,
four years now is Adobo steam car. Let me tell you what happened there. Uh, Adobo runs on, uh,
a much higher pressure than other steam cars. Stanley's can run at, uh, at 250 degrees,
300 degrees. Adobo be about 750, 800 degrees. It runs on superheated steam, which you need an oil
that can take that kind of temperature. I advertised a guy called me. He said, oh yeah,
I make that oil. Okay. He gave it to me. It wasn't, it was just regular steam oil. It wasn't
high temp steam oil at all, but it really lunched the whole motor because everything just scored
the cylinders. And so we had to make all new internal parts with Adobo. I'll show you how
that's going. Come on. Okay. These are the internals of our Adobo steam car engine. Um,
you know, as much as we like 3d printing and it's great, it's just like a boon. It saved the hobby.
You can't beat a skilled machinist, someone who can really just make anything out of metal.
You know, the fun thing about handmade things is hands haven't changed so you can still make
them again. It just takes a lot of skill and it makes you realize how talented these craftsmen
were. Uh, for example, these are the pistons from Adobo steam car. This is a high pressure piston.
This is the low pressure piston and you have four. Yeah. Well, it's a four cylinder engine. Okay.
Here you go. Now what happened was I mentioned the steam oil, all these parts to score because
it wasn't lubricating. It was burning off and it ruined it. So we have to make all these new pieces.
Here's a blank that Bernard has already started on. As you can see, he hasn't cut the grooves.
This is such a complex engine, easier valves to let your steam in. Okay.
Bernard made these, the whole piece, the whole piece. He hit, well, I'll show you here. The
original, do you see the originals as it came from the factory? It looks like some kind of
bad tootsie pop or something, but as you can see, it's all, it just score. And there are piston
rings that go in here. You got to get the piston rings, have the piston ring made. And there's a
lot of piston rings in this thing. If you count all the pieces, probably about 84, something like
that. Here are the brand new ones Bernard made right here, as you can see. And you can see up
here it's cracked and broken from, from distortion and heat and not having the right lubricant. But
this is really the machinist's art. It's amazing that Bernard is able to do this.
These are the cylinders here. We will get this thing back together. Here is another
piston in process. Okay. But like, that's pretty much where we are. We've got a lot more work to
do here. Oh, okay. Here are piston rings. Had those made in England. Right here. Well, it goes around
the valves and pistons everywhere. You know, a steam engine is different than internal combustion
engine. Internal combustion engine, you want to get the heat out. A steam engine, you want to
keep the heat in. Any place heat is escaping, you want to block that up, either using piston rings or
insulation or something. Because the more heat you have, the more power you make. So,
and they run at a much, much higher temperatures than, than internal combustion engine,
because obviously the reason of keeping all the heat in. So anyway, but that's pretty much where
we are. We're just making every piece. It's a nightmare, but it's, it's one we're going to
wake up from and be fine. So that's pretty cool. All right. Well, that'll give you some idea of
what's going on here. We haven't done a restoration blog in a while, so we thought we'd bring you up
to date. Anyway, we'll see you guys again next week. And I hope you enjoyed this look at the
shop and what we got going on here. We keep, as you can see, we keep pretty busy. See you guys next week.
