घर की वायरिंग करवाने से पहले ये जरूरी बातें जान लें | Electrical Wiring Tips 2026
घर में वायरिंग करवाने से पहले यह वीडियो जरूर देखें। इस वीडियो में जानिए घर की वायरिंग करते समय किन बातों का ध्यान रखना चाहिए, कौन सा वायर लगाएं, Switch Board कहाँ लगाएं, MCB कैसे चुनें और सुरक्षित Electrical Wiring कैसे करें।
house wiring tips ghar ki wiring electrical wiring tips home wiring guide switch board fitting wiring mistakes best wire for home electrical safety mcb fitting house wiring kaise kare new house wiring wiring tips hindi electrical fitting copper wire modular switch board home electrical work wiring guide 2026 house construction wiring electric wire selection wiring safety tips
DISCLAIMER: Some contents are used for educational purpose under fair use. Copyright Disclaimer Under Section 107 of the Copyright Act 1976, allowance is made for "fair use" for purposes such as criticism, comment, news reporting, teaching, scholarship, and research. Fair use is a use permitted by copyright statute that might otherwise be infringing. Non-profit, educational or personal use tips the balance in favor of fair use. All credit for copyright materiel used in video goes to respected owner
AI Generated·May contain errors
Badiya does something peculiar.
If you are building a new house and arranging the wiring
It needs to be done.
Wiring is a job closely related to life itself.
You get sex done, you hire a tiler, you get cloud computing done—those tasks will get accomplished.
I mean, if you're even slightly careless, it'll be gone.
But wiring is a task deeply rooted in you, your children, and your parents alike.
It means it is rooted in your children, your grandparents, and in you all.
When you had the gates made, you also had the board installed, the shutters fixed, and the windows put in; who else could have done all these tasks for you?
You'll get an excellent wiring in your dash and the utmost safety, which is the most potent safety there is. So, I've prepared a complete guide for you—ten to twelve pages long—this video is tailored for you.
What work needs to be done first is planning. If you plan well, you can carry out the work smoothly and efficiently, ensuring proper alignment and precision. This greatly enhances the quality of your work, especially when it comes to building walls, which requires great care and attention.
It becomes weak because a pipe gets there, so it decreases; how will they discuss this?
For this, the wiring and piping rule tells you how to properly route the wire and what type of pipe to use.
For this, MCB and proper earthing are extremely important. If any leakage current occurs in the house, proper earthing is very essential.
Earning is extremely important, earning is extremely important
You will now realize how we will make the decision. Friends, you will be able to get the proper electrical drawings prepared before work begins.
You should have one to two hundred in mind—guest bargers, premval bargers, or anyone else who can charge, and who can charge a laptop, all of this should already be in your mind.
If your layout is not proper, then in the future, if you want to change anything related to the wiring, you can still do so. First, make sure the layout of your electrical installation—whatever electrical distribution you are carrying out—is correct.
You don't necessarily need to cut anything; just place the AC, TV, WiFi, CCTV TV, and inverter in the desired locations beforehand—this is very important. You must decide where to place the inverter.
If you wish to install a CCTV TV camera in the future, you will also need a separate plan for it, because the cable runs from your router location. Even if you opt for a cable-based setup instead of Wi-Fi, you'll still need a separate plan.
The water for the shower is on, so it's getting hot there.
A two-meter-long pipe is installed, and water starts flowing out.
You should also arrange a pipe for him, for this
If you talk about it later, then now it's too late to ask such a difficult question.
What is "impotency"? People say it's something that develops after a fit of anger.
If this is attached to a two-foot lever, the force is applied at some point on the lever.
Hangs a chandelier for 10 rupees, hangs a ceiling fan for 8 rupees.
If someone hangs a 6 on a stand, it also has its own standard.
if you want to install a ceiling fan with a blade fan
You should install it between 2.5 meters and 3 meters.
You can install a ceiling fan from 2.4 to 3 meters in height, or even up to 2.5 meters.
It's standard, isn't it? The bar is from the wall's lat.
So, in the wall, we install a bulb, which also has its own height.
At 2.25 meters, whether it's a pre-bulb, CFL, or rod, whatever is being installed there
It should be at a height of 2.25 meters, the switchboard, the boards you have.
His stand is also 1.3 meters; I'm talking about 1.3 meters, you can see it.
A human's height is approximately 2.25 meters.
Your sketch has been prepared here accordingly.
They are very important, and here are the teacher's tips.
Be sure to mark the wall with chalk before operating the cutting machine here.
Never cut without marking, whenever you raise the electrician.
So, please cut it off from here in advance.
Have the marking done there with chalk, even with an A.C. we need to make such cuts.
If you pay attention to these things, you will be able to get good and safe wiring done at home.
It was very important to understand the standard, what your hideout for the switch was.
You talk about it afterward, if we people are doing wall chasing and wall and zirī rules, don't make it bitter just like that.
You have some Russian skills, so how to cut it—I've already taught you; cut the rebar 10 to 15 days after the wall is built.
Because within 10 to 15 days, the wall will have properly set and hardened, only then should you proceed with cutting the joints.
The horizontal cut should be at least as much as the vertical cut, otherwise, it will be slightly inclined, and there will be a slight inclination in the wall.
And if two long cuts are being made, you must keep the distance between them at least two meters.
That's not how it works; you can't just do it right next to it like that.
Some things are standard, so we'll keep them in mind—your home will remain strong, and the wiring will also stay in good condition.
After that, the GI box should be set 2 to 3 mm below the wall surface so that the putty-painted wall appears even.
Whatever box you install in the wall, first of all, install a GI metallic box, which does not rust, okay? And install it 2 to 3 mm below the surface, so that whenever your plaster cracks, your
This will show up on your fiber mesh—what else can I say? Make sure to apply the fiber mesh before plastering over the wall; otherwise, cracks may appear in the wall. Even when cutting in the wall, this happens.
Here, take this, look—they appear green from the green garra, and then apply the paste.
Here, it won't crack during Diwali; cracks won't appear, you must not have seen it.
After that, the wiring and pipes of the chhat are visible, and this is extremely important. So, what happens afterward—if your planning isn't proper, you just randomly spread wires anywhere in the chhat. What happens then? Where the pipe lies, there will be a kanger.
If it doesn't work, your wall is weak, your mat is useless.
It is weak, so there is a heavy pipe in the chute.
Use pipe 12-15 kg whenever you are in the chhat.
Order pipes, but the ones you order should weigh between 12 to 15 kg.
This is an istinder.
Levers cause the pipes to break each year.
To maintain the strength of Chath
Lay fewer pipes in the slab.
Lay as few pipes as possible.
If you want to install a false ceiling
Because if you want to install a false ceiling
So, in a false ceiling, a recessed light gets installed.
There is no longer a den of Denny.
Fill only 60% of the pipe with wire
How many lines does Zyan Dakhie take you?
The short circuit wire heats up and expands.
If there is no space left, they will stick to each other.
So if there's a little space inside the pipe
So if the bypasses are not short-circuited
So the wire won't stick; keep a little space for this reason—it's important. You're staying.
How to connect the wire will be shown.
If the fire reaches the resident, it grabs them.
Zahiri pulls out the black thread
They don't burn, the fire in the furnace of hatred burns. Dannkkehr from 8. Today I didn't take the smoke, this is the fire, this energy.
Use the Poul valve pipe view here. You will see it here.
Its wiring and color coding will be such that once wired, it will operate properly.
But if there's a parabola, and you know the color coding, there won't be any problem.
As for the light and fan, use an EMM for the light tower.
And for two M&M geysers and Solar Ampere Power Sock, you can use this.
For a split-type AC, if you're going to run the AC, you should get a four-amp都不会
I've also provided some tips here.
After that, connect the red wire to the live terminal and the black wire to the neutral terminal.
And Feng, you can choose green or Alu Dalwa; their color coordination will also be kept in harmony.
You won't have any trouble with this in the twenty-second.
Never make a taped joint in the wire for an AC fridge.
You also know that just one line is enough; you won't have any trouble with that.
After that, for the room, separate line, Kishin's separate line, here until your name arrives, it gets divided for this purpose.
A circuit breaker (MCB) should be used for each line supplying a room; therefore, you should install a separate MCB for each line intended for a room.
Here, tips are also provided: before wiring, calculate the total load for the entire house, and install a separate MCB for each room.
You can see here that tips are also provided; an individual MCB should be installed before wiring for the geyser.
It protects you from sudden electric shocks and lightning strikes. Earthing is absolutely essential for safety when installing wiring. Therefore, you must always check these aspects whenever you have wiring done. If you are doing this...
Washing, washing, washing—when people started getting involved
Always keep the wire under control; it's fine to be neutral, but if it's not controlled, it won't feel right.
Do not connect more than ten points or a load exceeding 800 watts on a Swiss board, and do not exceed 3000 watts on the power board.
Only use branded Swiss watches with a fire rating of 2-3 hours, but keep in mind that if the watch is damaged, it will not be matched again.
I'm giving you the list suggestion again; here, you must always install the Swiss plates only after the painting work is completely finished. You should install the Swiss plates only when your painting is done—don't delay or rush it.
Yes, take the final wiring diagram from the electrician so that you can easily carry out any necessary repairs. Hold back 10 percent of the payment for ten days, and during this period, thoroughly check all points and loads.
Friends, I've shared some tips related to wiring that will be extremely helpful to you in the future whenever you get wiring done. Just keep these things in mind, and your wiring will turn out excellent.
That's all for this video. If you liked this video, please like it, and if you have any doubts or questions, feel free to ask in the comments.
And we have also provided you with Sambar, and if you require our tree service, you'll need to upgrade your electrical wiring as well—I'll let you know about that too.
Fanks Watching