Building A Tiny Home On Wheels For A Homeless Guy

Interior layout ideas
68 followers
3 Video Views·May 11, 2026
AI Generated·May contain errors
This is me talking to Daryl, a homeless guy living in the streets of southern Utah.
I wanted to build him a tiny home that can keep him cool throughout the day
and warm at night since Utah has such extreme weather conditions.
So I picked up some supplies and started off by gluing waterproof polyboard
to sheets of one inch insulation.
And I love using insulation to build these tiny homes
because it helps regulate temperature and it's super lightweight.
I built the frame to this tiny home by using 2x3s for the border of it
and 2x2s for the inside beams to help keep this thing nice and lightweight.
Once I finished putting the frame together, I set it aside and started to cut out the subfloor.
This tiny home will be 32 inches wide by 6 feet long on the inside
which will give Daryl plenty of space to move around since he's 5 foot 9.
Our previous build only had two wheels
which made it hard to keep it stable while you sleep inside of it.
So we chose to build this one a little different by adding four wheels, something like a wagon.
These are 7 inch wheels that we picked up at Harbor Freight for $15 a piece
and we installed them onto the frame using inch and a half pocket hole screws and some washers.
Once we finished putting the wheels onto the frame,
we had to give it a little test drive because who doesn't like to have fun?
We then had some trim pieces and some vents that we wanted to paint the same color
because we wanted to give this tiny home a nice aesthetic and it needed time to dry.
So we painted them and set them to the side to dry
while we finished building the rest of the tiny home.
So the next step is to cut out the foam pieces that we glued to the poly wall
because these will work as the walls to the tiny home.
Now that the walls are put up, we had to build some rafters
and they're basically triangles that are designed to hold up the roof covering
and since we need a super lightweight tiny home, we built ours using 1 by 2 inch wooden slats.
We then pocket holed and nail gunned them to the wall supports
then ran a 6 foot beam from end to end to give this tiny home a little more structure.
We then cut out half inch insulation and taped it onto the rafters
before cutting out the roof that we would be screwing through the insulation and into the rafters.
Now that the roof is all put together, it was time to install the solar panel
and we spaced apart the rafters the exact distance of the solar panel
so we can screw it into a beam and we'll hook it up to the battery later on in the video.
But the next step was to screw some more 2 by 2s to the border of the entrance
because this will work as a frame for the door.
I then measured and cut out a hole on each side of the tiny home
to be able to install these little vents that open and close.
We then found a pallet and figured it was a good idea
to use it as some more trim pieces for the outside of this tiny home and the front door.
So I started to take it apart with a hammer but it was too much work so I just took a shortcut.
But while I finish the front door, be sure to click that subscribe button
because this is the third tiny home we've been able to give away
and it's only possible because of all the donations we've got on our GoFundMe page
100% of all the money is going to go to people in need
so if you guys want to donate the link is in the description.
Now that we have the door put onto the tiny home
it was time to install the trim pieces that we spray painted in the beginning of the video.
We used adhesive and screws to put them onto the tiny home
and this will trim out all the edges to give it a better aesthetic.
But then I got lazy and decided to take a break
and my wife had to call me back into action but it was a break well deserved.
I then installed some shelves using some of the wood from the pallets
then used the remainder to cover up the rest of the tiny home
and I feel like the pallets gave it a little bit of a barn look but I like it.
But the next step was to set up the electrical system
so we picked up an inverter, a battery, and a solar controller.
We ended up reaching out to Leetime to see if they can send us one of their batteries
because these are the same lithium batteries we use in our camper van
and they work great not only for RVs and camper vans but for boats as well
and the way this electrical system will work is by using a solar panel
to convert the power from the sun into voltage
which will run through the solar controller to regulate the voltage
in turn charging the battery so Tero can have some power.
I'm going to put their link in the description below
because I support companies that want to help our community.
So thank you Leetime for sending us this battery it'll definitely be put to good use.
And I know I'm going to get some comments saying that I didn't use a fuse for the inverter
but this is a super small system and the inverter already comes with a built-in fuse.
But I then finished up hooking up the solar panel and made sure it was charging
it was time to install the inverter which was super easy to install
then I turned it on to make sure it would work and just like that we have power.
Now that the electrical system is all finished up I did some last touches
and installed the handle to be able to pull this trailer
while Hope took a trip to Walmart to pick up some things for Daryl.
So Hope is finally back from Walmart and she got him a bunch of things like a blanket
pots and pans a little cooktop and a bunch of food.
All right guys so Daryl's on his way I'm freaking excited can't wait to give this to him.
Let's see how he likes it.
Got you a a battery with with a inverter the solar charges the battery and
you can turn the inverter out so you can charge your phone stuff like that.
Some granola bars little pots and pans for camping.
Like a little stove that you can connect to a propane tank and and you can cook and stuff.
I got you a bluetooth speaker.
Some food this is all filled up with a bunch of food like you know a propane tank is in there.
Hey God bless you man.
I bless you too.
I want to thank God for allowing this man to come into my life
and the camera lady because it really was a blessing you know what I mean.
And hopefully this this is it right here this is my I want to start with this.
All right bro here's the keys to your new house.
Thank you I appreciate you I appreciate you.
