[00:36] Planning and Essential Oil Mix for Natural Soap
[02:33] Preparing Colors and Gradients for Soapmaking Tutorial
[05:01] Creating Sky and Mountain Layers in Natural Soap [06:37] Inner Flower Path Design: Soapmaking Step-by-Step
[10:59] Highlighting with Flower Piping: Natural Soap Tutorial
[11:38] Detailed Flower and Leaf Piping Soapmaking Techniques
[15:12] Finishing Touches and Final Look of the Natural Soap
AI Generated·May contain errors
Hello, today we are going to make soap flower using piping.
The top of the soap is where the design looks the most beautiful.
Actually, it's a bit difficult, but it creates one of the most stunning soap designs.
So that's why I keep making it again and again.
For flower piping, we use tools just like baking piping tips.
I bought a full set. It includes different flower tips.
There's also a V-shaped tips for leaves.
Let's start with the most basic flower, the rose.
First, the basic of design soap, we need to plan and calculate the amount.
This is something we repeat every time.
I'll create a curved path with a flower field.
And place the flowers on top.
I'll use a clay to make a simple sun.
Roll it long and match it to the mold size.
Today, I added about 10 ml of etchant essential oil.
And mix the oils and light water and bring it to trace level 2.
And set aside about 390g for the sky gradient.
And blend the remaining soap batter one more time.
I use about 10 more seconds.
Please check my trace.
Now measure about 250g for piping decoration on top.
Prepare 50g for the path and about 60g each for 3 flower and leaf colors.
Also prepare 2 colors for the mountains about 75g each.
Add different amount of titanium dioxide to each flower colors.
And make the color bright and vivid.
Add a small amount of neon color as well.
The path should stand out from the flowers.
So I'll keep it bright using only titanium dioxide.
Put everything into piping bags.
I'll make the mountains in a purple tone.
Not too bright, just a dark purple for shading.
Because the mountains are not main focus.
Put them into piping bags as well.
The sky mixture with a set aside has thickened a bit.
And take about 40g for clouds.
And add titanium dioxide to the rest then divide into 7 parts.
Then quickly mix to create a gradation.
If the colors don't connect well, blend them gently.
I blend them together to connect the colors smoothly.
For the clouds, I didn't use titanium dioxide.
I use only neon color.
Now at this point, the piping soap has passed trace level 3.
Cut the piping bag and start from the center of the path.
The path should be thick at the start and thinner as it goes.
Layer the three flower colors along the high of the path.
You can go a bit faster in this part. It's an easy step.
As the path curves smoothly side the way,
after moving, cover the previous path with flowers.
Keep moving the path to the left and follow with flowers.
After moving left about 3 times, turn to the right.
And flowers will follow and cover it again.
Use all the soap for the path and flower to finish this part.
And now start placing the mountains from the darker shade.
Add a white shade next to it.
And blend them softly with a stick.
Build the sky from the low part of the mountain.
As you go on, make it wider.
I'm shaping the mountain peak to make it pointed right now.
Add fluffy clouds.
Avoid the clouds and build the next layer of sky.
Smooth in with a stick.
Add another cloud in a different spot and place the sun.
Cover with the sky to finish.
Now it's time for the highlight of flower piping on top.
The texture is not thick around race 4.
Set aside about 13 gray for leaves and color it with green upside.
The rest will be bright red for flowers.
Fill the piping bags with tips.
Now we'll start piping.
The sky and flower soap have different textures so it kept lifting off.
If that happens, apply a little soap on the surface first.
Then it will stick much better.
If the first flowers did well, the rest will hold each other so piping become easy.
Set the flower height to about 1.5 and pipe steadily.
Apply steady pressure then release and lift the tip.
If you go too slow, it won't release properly.
If needed, open the mold slightly and fill the gaps.
Now let's pipe the leaves using a V-tip.
The pointed part of the tip, create the leaf veins.
Move the tip gently side to side with small back and forth motion to create the leaf veins.
Finish the leaf with a sharp tip.
Now I'll use another tip.
Flowers with stamens are a bit more difficult.
If they don't separate well or keep falling,
use a stick to gently release the stamen that didn't come off the tip.
Yellow flowers also give a different feeling.
Soap with flowers always feel romantic.
You can even tell many stories with a romantic soap with a story.
Isn't it beautiful?
Thank you for watching.
See you again.