Here are 20 new Wera tools focused on VDE insulated tools, professional screwdrivers, and electrician hand tools built for daily work. We walk through compact Wera kits, torque tools, ratchets, and precision screwdriving systems that electricians trust. If you search for best tools for electricians, Wera VDE screwdriver sets, or professional electrical tools, this walkthrough helps you see what really matters before buying.
New Wera Tools List (Paid Link):
00:00 - Intro 00:35 - 6007 Joker 01:43 - Wera System Impaktor 02:43 - 9532 Kettennieter Werkstatt-Set 03:49 - Kraftform Kompakt 100 04:59 - Zyklop Pocket 05:56 - Kraftform Kompakt 900 06:54 - Kraftform Kompakt VDE 7 07:49 - Bicycle Set 1 08:35 - 9650 Magnetic Strip Kraftform Screwdriver Set 09:31 - 8010 B Zyklop Comfort Knarre 10:17 - 9530 Torque Wrench 11:18 - Tool-Check Modular Set 1 12:16 - 38100 SB 12 Zyklop 13:07 - Joker 6004 VDE 14:07 - Kraftform Kompakt 20 RA-R 14:58 - Joker 6006 16:08 - Click-Torque Lock wrenches 17:17 - 410 i VDE B RA VDE-insulated T-handle adapter screwdriver 18:24 - Belt B VDE 1 19:28 - Ball Grip 20:26 - Outro ------------------------------------------------------------------------------------ #machine#tools#Powertools
We are not just looking at tools today, we are looking at how work actually gets easier in the
field. Today we have 20 Wera tools, and each piece solves a very specific problem, from tight access
to precise torque control. Some of them feel simple at first glance, but once you use them,
the design choices start to make sense. So let's see where each tool actually fits in electrical
and mechanical workflows. Let's get started. So to start this lineup, we have the Joker 6007,
and the first thing you notice is that extended body. It is not just for looks, it gives you
extra leverage, so you use less wrist force when you deal with tight or deep fasteners.
Because of that reach, it fits well in panel frames, mounting channels, and confined installation
zones. On one side, you get an open jaw with a gripping function. The hardened teeth clamp the
nut firmly so slipping is reduced even when you work overhead. On the other side, there is an 80
tooth ring ratchet. That fine tooth design gives a very small return angle, which helps in tight
spaces where movement is limited. In addition, the dual hex jaw shape reduces the need to flip
the wrench again and again. It is made from chrome molybdenum steel with a nickel chrome finish,
so it resists corrosion well inside conditions. Size markings are clear for quick selection.
However, it is not VDE insulated, so it suits mechanical stages of electrical work rather than
live systems. Now if you have ever snapped a bit under an impact driver, you already know how
frustrating that gets. So this system feels like it was built from that exact problem. The Wera
System Impactor focuses on handling extreme torque without giving up halfway through the job.
At the center, there is what Wera calls a tritorsion setup. You get two torsion zones in the
holder and another one in the bit itself. So that creates a kind of buffer system that absorbs sudden
torque spikes instead of transferring all that stress into one weak point. The result is longer
bit life, especially under heavy impact use. Then there is the diamond coating on the bits. These
tiny particles grip into the screw head, which reduces slipping and lowers the pressure you need
to apply. The holder also uses a strong ring magnet, so even longer screws stay firmly in place.
For electricians who use impact drivers during installs or mounting, this system feels like a
solid upgrade in durability and control. This one might feel a bit outside typical electrical work
at first, yet if you deal with bikes, e-bikes, or workshop setups, it starts to make sense quickly.
So the 9532 Chain Riveter Workshop Set is built as a full 20-piece kit for chain work. At the center,
you get a precise chain riveter with an exchangeable pin. It handles everything from
single-speed chains up to 12-speed systems. That range matters when you deal with different
drivetrain setups. Alongside that, there is a Zyklop mini-bit ratchet and a wrap adapter
hand holder which adds flexibility beyond just chain work. You also get a dedicated chain link
plier, which makes opening and closing master links much easier. The included bits are 89mm long
and use hex-plus geometry, which reduces rounding and improves grip inside the screw head.
Everything sits inside a folding pouch that keeps it organized and easy to carry.
So for workshop use, especially where bikes are involved, this set feels complete and well-thought
out. This one feels like opening a compact kit that just keeps revealing more tools the longer
you look, so the Craftform Compact 100 packs 52 pieces into a textile case that stays neat
and structured. Inside, you get a wrap adapter hand holder, another wrap adapter holder for
machine use, 30 bitorsion bits, 12 impactor bits, and 8 hex-plus L keys. That combination
covers both manual work and power tool use in one place. Bitorsion bits handle daily fastening
and absorb sudden load spikes, which helps extend their life. When higher torque comes into play,
especially with impact drivers, the impactor bits step in. They are built to handle that stress
without failing early. The hex-plus L keys help reduce wear on socket screws, which is important
during repeated maintenance. Color coding helps with quick selection, and the case stands upright
for easy access. It also integrates with Wera 2 Go systems. Not insulated, so it stays for prep
and assembly work, yet for versatility, this set covers a lot. This is one of those tools that
makes people stop and take a second look. It is small, yet it does more than expected. So the
pocket combines a ratchet screwdriver and bit storage into one compact unit. It supports 1
quarter inch bits and 3 eighths inch sockets through magnetic mounting. Inside there is a
72 tooth ratchet, which gives a very tight 5 degree return angle. That becomes useful when
you barely have space to move your hand. The head pivots and locks into different positions,
so you can use it straight, angled, or even like a tea handle. Inside the handle,
12x torsion bits sit in a rotating magazine, always within reach. It is not insulated,
so we keep it for non-live work. Still, for panel mounting, rack installs, or quick service jobs,
this tool covers a surprising range. For something that fits in your pocket, it feels very capable.
Now this is the kind of tool you appreciate when things don't go smoothly. We are looking
at the Craftform Compact 900, and it brings a manual impact function into a compact screwdriver
setup. So when a screw is stuck, or slightly seized, you can apply a hammer strike,
and it converts that force into rotation, delivering up to 25 newton meters. That is
enough to break loose many stubborn fasteners without switching tools. And when you do not
need that function, you can turn it off and use it like a standard screwdriver.
There is also a hex bolster that allows extra torque using a 13mm wrench. The set includes
multiple bits designed for durability, and the continuous blade system ensures direct
force transfer. It is not VDE insulated, so it stays for non-live work. Still,
for repair situations, this tool adds a level of control that is hard to ignore.
Now we move into something more focused and everyday friendly. The Craftform Compact
VDE-7 is a compact insulated set built for common electrical tasks. You get one insulated
handle and six interchangeable blades, all at 157mm in length. These blades cover the
most used profiles in electrical work, mainly slotted and posidrift sizes. So instead of
carrying multiple fixed screwdrivers, this one setup handles the basics cleanly.
Each component is tested up to 10,000 volts and rated safe for 1,000 volts.
The handle follows the Craftform design, which balances grip and control during longer use.
Color coding helps you pick the right blade quickly, which saves time during repetitive work.
The pouch keeps everything organized and easy to carry.
For daily electrical jobs, this set feels simple, safe, and reliable.
Now this one steps slightly into a different space, yet it still connects with technical work.
The Bicycle Set 1 is built as a compact toolkit for bike maintenance,
and that includes modern e-bikes as well. Inside, you get a mix of bits,
sockets, and a compact ratchet system designed for common fasteners found on bikes.
The set focuses on portability, so everything stays organized in a small textile pouch
that fits easily into a bag. The tools are designed to handle precise adjustments,
which matters when working on sensitive components. While it is not a VDE set,
electricians who work with e-bikes or similar equipment may find it useful.
It is more of a specialized kit. Now let's talk about organization and quick access.
The 9-6-5-0 Magnetic Strip Craftform Screwdriver Set takes a different approach by combining
storage and usability. You get a set of craftform screwdrivers along with the magnetic strip that
holds them in place. The strip allows you to mount the tools on a wall or workspace,
so they stay visible and easy to grab. That saves time, especially during repetitive work
where you switch tools often. The screwdrivers follow the classic craftform design, with
ergonomic handles that balance speed and torque. Some may include features like laser tip,
which improves grip on screw heads and reduces slipping.
This set is not about portability, it is about keeping your workspace efficient. For electricians
working in fixed setups or workshops, this makes tool access much more convenient.
We finish this group with something that focuses on comfort and control during longer tasks.
The 8-0-1-0B Zyklop Comfort Ratchet is built around ease of use without losing strength.
It uses a 3-8-inch drive and features a fine-tooth ratchet mechanism, which allows smooth
operation even with limited movement. The handle is shaped for comfort, so it sits well in the hand
during extended use. The ratchet head design allows flexible positioning, which helps when
working around obstacles or inside tight assemblies. Switching direction is simple and quick,
so workflow stays uninterrupted. This is not a VDE tool, yet it fits well into mechanical
stages of electrical work. This one sits a bit outside pure electrical tightening work,
but in HVAC and installation support, it becomes very relevant.
The 9530 Torque Wrench Kit is built around the ClickTorque X7, which handles a range from 10
to 100Nm with ±4% accuracy. What really helps on site is the QR code on the wrench. You scan it,
and it directly calculates the correct torque based on insert tool length,
which removes manual errors. Along with that, you get three Joker self-adjusting insert wrenches,
covering 16-32mm. They grip automatically, so no manual sizing is needed. On top of that,
the ratchet action gives a smooth 30-degree return angle, which helps in tighter mechanical zones.
However, it is not VDE insulated, so it stays away from live electrical work. Still, for HVAC
assembly and controlled mechanical tightening, this set feels very precise and reliable in daily
field use. This one feels like a compact daily service kit that adapts fast to different jobs.
The ToolCheck Modular Set 1 is built so you only carry what you need, which keeps work efficient.
Inside, you get a selected mix of drivers, sockets, and bits that cover common fastening
profiles used in repair and installation. The modular system lets you swap parts quickly,
so setup time stays low. At the same time, each holder keeps parts locked in place,
even under rough handling. The layout uses color coding and clear labeling, which helps when
switching between fasteners during busy work. The case stays organized even after long use,
and it integrates with other Wera systems for easier transport. However, it is not insulated,
so it is not for live electrical tasks. Still, for rack installs, mechanical fittings,
and general service work, this set stays very practical and time-saving.
This is a 3-8th drive ratchet set built for steady mechanical control. The Zyklub system
gives you a solid grip feel right away, along with a direction lever that switches rotation quickly.
Inside, the fine-tooth mechanism gives a tight return angle, so even small movements help in
confined spaces like panels or equipment housings. The socket selection covers common metric sizes,
which keeps daily tasks simple. Each socket locks firmly onto the drive so it does not slip when
working at awkward angles. Meanwhile, the build quality supports repeated daily torque use without
losing stability. The ergonomic handle helps during longer sessions, while the storage rail
keeps everything aligned and easy to carry. It is not VDE rated, so it stays away from live circuits.
This one feels almost automatic the moment you place it on a fastener.
The Joker 6004 VDE set adjusts itself instantly, so no manual sizing is needed. It includes four
wrenches covering 7-19mm and ¼ inch to ¾ inch. That range replaces multiple fixed spanners in
one go. The jaws grip firmly and reduce slippage, while the ratchet function allows continuous
turning. A 30-degree return angle helps in tight electrical spaces like buzz bars or cabinets.
Another strong point is the parallel jaw design, which protects fastener edges. On top of that,
each wrench is fully VDE insulated and tested up to 10,000 volts, so it supports safe work up to
1,000 volts. For electricians handling glands, mounts, or panel hardware, this set feels fast,
safe, and very efficient in daily use. This tool works more like a compact system than
a single screwdriver. The Craftform Compact 20RA-R brings flexibility into one handle.
Inside, you get six bitorsion bits stored directly in the grip, so basic profiles are
always ready. The built-in ratchet helps during long screw runs, while the free-spin mode allows
quick rotation when resistance is low. Then comes the telescopic blade. Short mode helps in
deep recessed screws, while extended mode works like a normal driver. You can also remove it fully
and use it as a bit holder for power tools. The RepAdapter system allows fast bit changes
with a secure lock, which reduces downtime between tasks. However, it is not VDE insulated,
so it is meant for non-live work. You know how we usually carry a handful of spanners just to
cover different sizes, and half of them barely get used. So this is where something smarter comes in.
Now we are looking at the Joker 6006, and it really cuts that clutter down.
You get two double open-end wrenches, yet they cover sizes from 7 to 19 millimeters,
plus ¼ inch to ¾ inch. That is a big range from just two tools. The jaws adjust automatically the
moment you place them on a nut, so there is no guessing and no manual adjustment. Once it grips,
it stays firm, which helps reduce slipping and protects the fastener edges. Both ends include
a ratcheting action, so once you are on the fastener, you keep turning without lifting the tool.
The return angle stays around 30 degrees, which helps a lot in tight panel frames or mounting
spots. It is not insulated, so we keep it for mechanical work before live stages. The folding
pouch keeps it compact and easy to carry. For electricians who want fewer tools without losing
coverage, this feels like a very practical shift. The click-torque lock series is built for control
tightening where accuracy matters more than speed. Once you set the value, you apply force until you
hear and feel a clear click, which confirms the target torque is reached. The range is quite broad.
On the smaller end, you get ¼ inch drives handling 2.5 to 25 Nm. On the larger side,
½ inch versions go up to 200 Nm. That covers everything from delicate fittings
to heavy structural tightening. A key feature here is the torque lock function. When it is turned off,
the wrench works like a normal ratchet. That helps when loosening tight bolts without stressing
the internal calibration. Some models also allow clockwise and counterclockwise torque application,
which adds flexibility during complex assemblies. These tools are not VDE insulated, so they are not
meant for live electrical work. Still, electricians use them heavily for panel assembly, rail mounting,
and structural tightening before energizing systems, where accuracy is critical.
This one feels built for serious torque in live environments. The 410 IVDE-BRA uses a T-handle
design, which lets you apply force evenly with both hands. That becomes very useful when dealing
with tight or stubborn fasteners inside panels. It runs on a 3⁸ inch square drive with a ball
lock system, so sockets stay firmly attached during use. Inside, a fine-tooth ratchet gives
a return angle of just 4.5 degrees, which helps when space is extremely limited. Now there is also
a free-spinning sleeve near the head. By applying light finger pressure, you can control resistance
and make the ratchet engage more smoothly, even when the fastener load is low. It is fully tested
up to 10,000 volts and approved for live work up to 1,000 volts. However, it must be used only with
Wera VDE Zyklop sockets for safety compliance. So, in real electrical panel work, especially
where torque and safety both matter, this tool fits a very specific and important role.
Now this is more about organization plus safety in one compact setup. The BeltB VDE-1 set comes
with 10 insulated bit sockets arranged on a textile belt that you can clip, hang, or mount,
depending on your workflow. Each socket uses a 3⁸ inch drive and is individually tested up to
10,000 volts, rated for safe use up to 1,000 volts. The insulation layer is dual-colored,
red outside with a yellow core underneath, so damage becomes easy to spot. The retention system
is also smart. Torx bits lock through shape, while hex bits use a spring ball mechanism.
That means screws stay attached even in overhead or deep cabinet work. Another useful detail is
the short socket length, which helps in tight corners where space is restricted. The belt
itself rotates smoothly and connects with Wera 2-go systems, so transport stays simple.
For electricians working inside live panels, this setup reduces dropped fasteners
and keeps everything within quick reach. Finally, this is a very tactile and practical
set for everyday electrical work. The ball grip series changes how force feels in the hand,
thanks to its rounded handle shape. It allows natural downward pressure,
which helps when loosening tight screws without straining the wrist.
Several drivers come with laser-tip ends, which bite into screw heads better, and reduce cam
out during high torque use. That improves control, especially in repetitive tasks.
The set also includes a chisel driver with a through-blade and impact cap.
That means you can handle light chiseling or even free-stuck fasteners when needed.
Many of the tools are VDE-insulated, so they are suitable for electrical applications. Everything
comes in a belt holster, which keeps access quick when working on ladders or in tight spaces.
Overall, it feels like a grab-and-go kit rather than a heavy toolbox setup.
And that wraps all! Thanks for watching. If you found it helpful, give it a like
and subscribe for more videos and don't forget to share your experience in the comments.