Clock Repair Basics. Clock movement test stand, assembly supports, clamping sets and brackets

Chrono Chronicles
8 followers
May 6, 2026
I've set up the movement on these movement stands, which makes it really nice and convenient
to work with, as you can see here.
They just screw on.
You can buy them as a set of four.
I paid, I think, $12 or $13 for them.
I bought them from a place called Time Savers.
That's one of the major clock parts suppliers.
They just screw on to the actual movement plate itself.
You can see here where I've put little pieces of paper here.
Actually, this is thick paper.
It's almost cardboard.
It's from a business card that I've cut up into small pieces, because since these do
screw on, as you can see, they screw on there.
The screw, as you tighten it on to the plate, can scratch or mar the plate.
To prevent that, I put the little paper on there to safeguard it.
It's good to have these stands, because when you're working with the movement, you wouldn't
be able to comfortably lay it face down, because that would interfere with this strike hammer
arm, and this crutch assembly here can be bent and pushed out of place.
Here we have our clock test stand.
As you can see, the movement would fit in the middle here, and it is adjustable to accommodate
different sizes of movements.
Also, it has these little screw-in features here, where you can adjust the tilt of the
clock stand, so that when you're testing the movement and checking the beat, you can make
adjustments for the level, or if you're on an uneven surface.
It also adjusts back here and over on this side, too.
These clock stands can be purchased, these test stands can be purchased at many of our
clock supply houses for a very reasonable price, and there's versions that look similar
to this, but this is the particular one that I have, and I like it very much.
There's a groove that fits right in here, and underneath here, that will clamp onto
your movement.
Also, if that won't fit your movement, it's got these removable screws that you can actually,
depending on where the screw holes are on your movement, you can actually screw it down
onto the test stand.
I'm going to go ahead and put the movement on the test stand, take off these clamps.
Let's see, I've got one more clamp to take off, and this one happens to fit very well.
