From Trash to Treasure: The Ultimate Roadside Dresser Makeover

Trash To Treasure
3 followers
This dark and dingy tossed dresser is about to go even darker. I'm using Minwax's Semi Transparent water based stain in True Black to take this discarded piece to a whole other level. There were some ups and downs, but overall, I LOVE how this refinished piece turned out. What's that saying? One man's trash is another man's treasure? Indeed.
______________________
#furnitureflip #refinishing #furniturerestoration #furnitureflipping #paintedfurniture #transcendfurnituregallery #diy #furnituremakeover #furniturerepair #dressermakeover #blackstain #darkacademia #darkfurniture
I was contacted about this dresser from someone I sometimes hire to do deliveries for me. This
was a roadside find with all pieces that get picked up on the side of the road. You never
really know what you're getting into. On the outside it looks like your typical somewhat
neglected vintage dresser. I wasn't sure exactly what type of wood it was at first because it was
a little bit hard to tell through the thick finish. Initially I was thinking doing something
light with this but I don't know maybe I'm thinking dark. There are definitely some issues
My name is Angie and I refinish furniture. Sometimes I paint and sometimes I don't but
I always do what I can to save old pieces from the trash. Welcome to my workroom.
Just before I get into today's flip I want to talk about this one. If you've seen this video
from a few weeks back you know that this was in terrible shape and I did what I could to save this.
At the time of the release of the video I had different casters on it. I used what I had at
the time and I didn't have a shelf for the top yet. This is what it looks like now. I finally
got these really cool casters in which I think suit the size and shape of the piece much better
than the big industrial ones and I had a piece of vintage glass cut. What's kind of neat about the
glass is it's a two-way mirror so it looks kind of dark and smoky from the top but the underside
actually looks more like a mirror. I feel like this little piece is now living its best life
and instead of selling it I'm opting to donate it to the rabbit rescue that I help out with sometimes
and I think Millie agrees with my choices here. What do you guys think?
But let's have a look at what I'm working on today. Right off the bat I can see that a lot
of the plastic glides are missing from the underside of the drawers. Those are really easy
to replace and I always have them on hand. With all roadside finds the first thing I do is pull
all the drawers out and have a really good look because you never really know why something was
thrown out in the first place. It could just be that someone has outgrown it or they bought new
furniture and didn't really know what to do with this but sometimes there are reasons people throw
furniture away that are not so pleasant and nobody wants a creepy crawly surprise and this right here
is why I almost never reach inside and just pull handfuls of crap out from the bottom of the piece.
In my videos it's kind of a given that I clean the pieces beforehand but I don't always show it.
Where this was picked up on the side of the road and I really don't know anything about it I wanted
to make sure that this was super clean and so that's why I'm showing a bit more of the
cleaning process than I normally do. The entire outside of this is pretty grimy so I'm using a
heavy duty degreaser. This is probably my favorite degreasing cleaner. I also like TSP but I like
that the Zep is already mixed up. Compared to some of the pieces I've done in the past that
just reek of one thing or another this didn't smell terrible but it did have a slight smoky smell
which isn't terribly uncommon for vintage furniture but there are some things I'm going
to do in this video to try to remedy that as I'm refinishing this. The back was loose in spots and
there were nails driven into it and I just decided to pull it off. I need to clean it really well
anyway. Now normally with vintage especially mid-century-esque pieces I like to keep the
original hardware where I can even if I do modify it but I'm not loving this hardware so this I will
be removing. I'll be keeping it and maybe using it on another piece at some point but for this piece
I have something else in mind. The two bottom drawers actually have solid wood handles and I'm
really happy that they are screwed on. Sometimes depending on the construction of the piece the
handles aren't removable and it makes refinishing it quite difficult but when you can take them off
it makes things so much easier. Oftentimes I'll wait till the end before I clean out the insides
of the drawers but with this one I'm just cleaning everything right away. Now I'm not entirely sure
what type of wood this is. Obviously it has been finished to be something along the lines of
walnut to give the impression that it's walnut but I know for sure it's not. What is a little
bit unusual though and I don't think I've ever seen this on a dresser is that the edging on the
sides and the front are solid wood and then there's a piece of veneer in the middle and what
was interesting while I was trying to strip this off is that the finish on the solid wood was coming
off super easy with just one application and the middle was very very difficult. I ended up having
to do three applications on the veneer portion of this and if you've seen my other videos where I
use the same stripper it's very effective and it's kind of strange that it was so difficult to take
whatever this finishes off. Another element of this particular piece that I don't love is the
two-tone wood. It's actually all the same type of wood which in this case on the drawer faces is
veneer but they've used two different colors to make it look like it's two different types of
wood. So whatever I end up doing to this in the end I want it all to be one and then that routered
out section can just be a detail on its own instead of having the routered section and the
two tones of wood. I just find it a little bit busy for kind of what I like to see. I just wasn't
having much luck getting this off with the regular putty knife so because the stripper has softened
the finish using my carbide scraper makes taking off what is left much easier.
I generally like to start with a fairly high sanding grit so this is 120 and you can see
not much is happening except on the solid wood areas. I think the solid wood areas are a different
type of wood than the veneer but I'm not 100% sure but the reason I think that is because of the way
the stain has soaked into the veneer and not the solid wood and as you can see here they are
slightly different colors as well. There are a couple burn marks on this piece. I'm not quite
sure how I'm going to address that yet because at this point I'm still up in the air with what I
want to do. Initially when I saw this piece it was so dark and dingy that my brain immediately went
light and beachy and airy and it was right around this part of the process where I started to
move to the dark side a little bit and I thought well what if I did this piece in a very dark stain
like a black stain or a black wash. I've done so many white washes and beige washes and although
I love it I want to do something a little bit different for me and I thought this piece would
perfect to kind of experiment with that on. One of these drawers had a strange split and the solid
wood drawer face has split here but you can see where the veneer is still attached. I think one
of the reasons this happened is that these glue blocks which normally have glue under them did not
so there was nothing kind of holding that bottom piece together to the rest of the drawer so what
I'm going to do I'm going to use a glue syringe and without taking the entire drawer apart I'm
going to try to get as much glue into the crack as I can all the way along and also add some glue
under these support blocks and when I put my clamps on they have to be fairly strategically
placed but when I put these on and apply some pressure you should start to see the glue squeeze
out in those areas. Okay it's finally time to take the legs off but first I need to clean up this
gross bottom. I don't often see gum on the underside of dressers I do quite often on
side tables and bedside tables but this is a first for underneath the dresser. This step is
optional but I like to do it especially on the grungier looking pieces and that is to take
150 grit sandpad and just very lightly sand that material. Now the handles I'm not going to be
stripping I'm just going to be sanding directly so I'm cleaning them off first and then I can go
ahead and do all of the flat sections with the surf prep with a normal sanding pad and then I'm
going to put on a half inch foam pad to do the rounded areas and what this will do is allow it
to keep that rounded profile without the risk of sanding it off and then I'm going to repeat the
whole thing for all four legs. I feel like Nacho can't really see the vision just yet but he'll
get there. All of these little plastic pieces I'm pulling off are to help keep the drawer moving
perfectly straight in and out and most of them I think there were only two that were still intact
the rest were all broken so I had to pull them off. These wooden guides get kind of chewed up
over time so I always like to sand them down. I'm kind of a weirdo when it comes to cleaning my shop
I like to clean all the sanding dust when I'm done the majority of the work before I move on to the
next phases. I thought about using an Odie's oil stain on these pieces but from my experience with
the lighter woods getting that dark rich opaque or semi-opaque look that I'm going for I haven't
really mastered that yet but I was actually speaking with Odie's oil yesterday the Canadian
rep lives not too far from me and he's actually figured out a really good formula for making an
opaque stain so I'm going to be doing that in an upcoming video. I'm spraying some shellac to the
inside which will help seal up any lingering odor. Now as I mentioned I wasn't loving the
original hardware this is as soon as I saw this piece these are the pulls that I had in mind and
this was actually a gift from Brian and Molly so thank you so much for this this is perfect for
this piece I think. I love the brushed brass but I also love the triangular shape and I think it's
going to play really well off these rattered details but as you can see this creates a problem
because the original hardware had two holes I only need one so I need to fill these and there's a
couple ways to do it you can use wood filler I like using dowels but the smallest dowel I have
is a little bit larger than the hole so I'm going to drill some new holes then I'll cut off the dowel
put a little bit of wood glue in and that will help seal it up. Now I want you to pay attention
here this is what happens when you go full tilt straight down with pressure on veneer on the second
hole I'm going to get up to speed first and then I'm going to push down and wait till you see the
difference in the holes. You can also use a piece of painter's tape to help keep the veneer from
splitting but in my experience just waiting until the drill bit has cut through the veneer before
you put a lot of downward pressure will make a huge difference. Once I have a little bit of
wood glue in the hole I'm just going to pound down the dowel till it's almost flat and then I'm
going to grab something that's completely flat and use the mallet on that to push it flush with the
surface. For this one that is a little bit chipped I'm just going to push a tiny bit of wood glue
under that and that should be enough to hold that down. I'm going to use a little bit of
Timbermaid wood filler just to make sure if there's any little gaps that it's nice and smooth.
Now if I was going to paint these drawers these dowel holes would completely disappear.
When you do a stain over plugs like this you can often still see them it's just there's no good way
to really camouflage that unless you're using toners and stuff which I'm not going to be using.
So there is a chance that you will still see these but hopefully they will blend in enough that they
don't immediately jump out at you. Now this is an amazing little gadget for figuring out exactly
where your holes need to be. There's a section in the back that slides that fits up at the top or
bottom of the drawer and then you have options. Clearly this handle doesn't need two holes so I'm
going to steal one from the side and put it right in this little center area. And right in front of
that there is a zero mark so what I need to do is figure out where the exact middle of my drawer is
and I am terrible at fractions always have been so I have this app to help me do this.
So 11 3 8 is exactly the center of the drawer and this is the app that I use.
Then I need to figure out exactly how far down the drawer it needs to be and it's three and a
half inches so I'm going to set this guide here on the back to three and a half inches
and then that little lip will hook onto the drawer and I just place it where it needs to go. So I'm
just going to double check my measurement here and then grab a clamp to hold this in place while I
drill. And because I can't help myself I have to triple check that this is in the correct spot and
it is so away I go. Again getting up to speed before I put downward pressure will help get a
near perfect hole through veneer so that will fit just like that. Now if you're looking at the holes
above and wondering why I'm drilling a hole below I'll just remind you that the original hardware
had a drop element to it. So technically the middle of that drop hole is where my new hole is
so this is definitely the center. This stain is by Minwax. It's a water-based semi-transparent
stain. I've never used this before and the legs because they're solid wood and I can easily sand
off if I make a mistake or if I don't like the look I'm opting to do all my testing on the legs.
I don't want solid black where I would have just painted the piece. I want a little bit of the
wood grain to show through but not a whole lot and because this is something probably like birch
I already know it's going to absorb a little bit weird and possibly be blotchy.
So the second one I'm going to do I'm going to add some wood conditioner first just to see if
that helps. Though from having used wood conditioner before I know that it will likely make it a little
bit lighter. Now initially I was going to go with something light and there's always someone every
time I put a clear coat on light colored wood they say oh I like the original raw wood look
better. It doesn't matter what you put on it this color is going to turn this color when you put
anything clear on it. So the raw wood look is not really doable unless you bleach the wood first
or do a light paint wash which as I said was my initial plan for this piece. But because I wasn't
able to get all of the dye stain out of this light colored wood I'm actually glad that I switched
things up and decided to go darker because it will camouflage that especially on the top.
So I'm adding the stain now to the piece that has been conditioned and lightly sanded
and you can see as soon as I start to wave it back it's definitely lighter than the first one.
I'm not 100% sure if to me it looks any less blotchy but it is definitely lighter and lighter
is not the direction I want to go. So at this point in my experimentation I'm liking the first
I did better. Now for my next test I'm going to be using a little bit of coal black and I'm going
to apply this straight to the wood and then wipe it back much like the dark stain. I just wanted
to see what this would look like. This with straight paint with no water in it is not the
best idea for anything larger than probably this leg because if I were to try this on the top
there's no way I would be able to wipe it off before it started to dry and it would just be
a disaster. But I just wanted to see what the difference is and you can see it's very similar
to the stain but for my last leg I am going to do a proper wash where I use water mixed with the
paint. Now this is the ratio I would use if I was doing a beige wash or a white wash but you can see
here that is just definitely not strong enough with the black to really deposit much pigment.
A black paint wash for me is not going to work for this either and also you can see that the
paint has absorbed into those more porous areas as well so I think that's the worst of all four.
If you want to see a close-up here this first one is the one with the wood conditioner.
This is the first one that I did with just the straight up stain
and I think what I'm going to do is actually just do multiple coats of it.
This was the one with the straight black paint and then this last one is just terrible.
So I'm going to get rid of these ones I'm going to sand them off again in a minute
but for now this has dried long enough that I can add on another coat just to see what happens.
I have a feeling that the more coats you add the less the blotchiness is going to show up
at least that's my hope. After a light hand sand to smooth down that raised grain and giving it a
quick wipe I'm going to go ahead and apply the stain and I'm showing this first section here in
because you have to move really fast with the water-based stain. It's not like an oil-based
stain where you can take a minute or two and move stuff around. This stuff dries really quickly.
I did also consider ebonizing the wood with a solution of let's say vinegar and steel wool
which has a great outcome I just didn't have enough time before this video had to come out
to do that so that's why I'm going this route. I'm just looking right now at the time stamp for
this particular clip and it was 47 seconds from start to finish to get this stain on and then it's
time to wipe it back very carefully. So under two minutes to get all of the stain on and then wiped
off and you can see here it's quite light but it's the same as the furniture leg. It's going
to get darker when I do my second coat. All of these little rattered edges I'm letting
the stain settle in and dry completely before I put my next coat on. Now earlier I showed me
raising the grain and what that means I'm going to show you a little clip here. When you apply
water these little fibers will raise up and make the surface quite rough so before you apply a
water-based stain it's a good idea to raise the grain and what you want to do is just add a little
bit of water let it completely dry and then take a fairly fine grit sand pad and just very lightly
sand those edges smooth. You don't want to completely sand them off or when you add your
water-based stain everything's going to raise up again because you just sanded off the work you did
but with some woods too it can also help with the depth of color when you're applying a stain. Now
again I'm showing the first part of doing the top here in real time because I am moving quite quickly
so quickly that I'm flinging stain everywhere which is a huge pet peeve of mine. I like to work
pretty clean but I just had to move so fast with this top and this particular stain is not
recommended for large surfaces like probably huge tabletops or floors because of the fact that it
dries so quickly. Now often you can add extenders to water-based stains or sometimes even a little
splash of water. It says on the instructions not to dilute it but I have done it with some of the
other water-based stains that I've used with good results so I mean that's up to you if you want to
try it. I did have a little trouble at the end here on the top with it already drying too much
to wipe off. You can see it grabbed the cloth right out of my hand and I'm glad there's no
audio for the shot because I was cursing a little bit with how quickly it was drying
and admittedly first coat on the top I'm not thrilled with but I'm trying to just stay calm,
carry on and realize that I am going to be doing additional coats. I let my first coat dry for
several hours before doing my second coat and once that was completely dry the next day then I went
in with some lacquer and I'm opting to use lacquer because it's pretty easy to apply and I think it'll
be a nice finish for this particular look. You don't have to sand between coats of lacquer but
because I work in a non-dust free space I like to just take a white pad and just make sure there's
no dust nibs on the surface before I do additional coats. You can see me here I'm applying my third
coat at this point and like I mentioned sometimes little dust particles show up and I just use these
little tweezers to pull them off. The few plastic guides that remain were quite dirty and I always
for some reason like to clean these at the very end. I know a lot of people for some reason don't
even bother to clean these but it's just one of those little things you can do to kind of make
your work stand out. I'm using Howard feed and wax in the drawers which have been completely sanded
inside and out and this is another way to make something old look new and just feel fresh and
smell nice. I often try to salvage pieces from vintage dressers and this little collection of
drawer guides came from other pieces so I'm going to wash these up in the sink and use them on all
of the drawers that are missing them. If you've ever flipped a piece of furniture you know there's
no feeling like finally putting the hardware on and while this maybe didn't turn out exactly the
way I expected I am happy with the results given that it was the first time using a new product
that is fairly difficult to use in the first place and I think a huge improvement over what
I started with. Only a few things left to do now and that is to clean up this back panel and again
this is something most people skip. Because this was already partially falling off I decided to
pull it off all the way and just clean it up. Normally I don't paint or do anything to the
backs aside from clean them but because there are no markings on this anything distinguishing it
or identifying it I'm opting to add a little bit of shellac on after cleaning and then I'm going
to spray a matte black primer on it just because it's not very nice to look at. Here I'm using a
1500 grit marker Milan gray pad which is the same thing that I normally use to apply Odie's oil
and this just gives a slightly heavier buff if you will before my last coat of lacquer which
I'm applying here. Home stretch now. Thank you for sticking with me. I know this one is a little bit
longer than it probably seems it should be because of all the prep work but it's part of the process
and I wanted to share it with you. I'm finally getting to use my new compressor that I bought
with my most recent influx of buy me a coffee money so thank you so much to everyone who helped
make this possible and also to Steve who sent me this pneumatic crown stapler. This is going
to make putting these little plastic pieces back on super easy as well as reattaching the back panel.
Holy smokes what an awesome couple of days of work. It was a bit frustrating at times
and as usual I was second guessing my choices but in the end I'm really happy with this. It looks
like something you'd get at a high-end store but obviously done for way less money. Working with
the stain was a little bit tricky but it was fun to kind of show you how I think my way through
things sometimes. Just to quickly go over some of the products that I used. I cleaned everything
with either the heavy-duty citrus degreaser by Zepp or this all-purpose cleaner. I used
bullseye shellac on the inside of the piece and then this minwax semi-transparent wood
stain in the color 2 black. Mohawk pre-catalyzed lacquer in a satin finish. Painter's touch flat
black primer on the back panel and then Howard Viden wax in the drawers. Okay let's finally see
it. Thank you for watching.
