🌱 I Built Nature Indoors!!! 🐸

Mini World Craft
6 followers
5 Video Views·May 3, 2026
Most terrarium waterfalls fail within weeks. They clog, rot the substrate, or the water quality
fails. So I built this one to last indefinitely. Nothing here exists without a purpose. Every plant
and animal has a specific job. Waste becomes food, food becomes stability. Energy flows,
and nothing is wasted. My first step was siliconing all the seams shut to make sure
I wouldn't have any leaks down the road. Then I built a housing for the pump using
aquarium divider grid and covered that with aquarium filter foam. A key aspect to every
successful terrarium setup is a proper drainage layer. For this I simply used some more aquarium
divider grid, pieced it together, and elevated it about an inch and a half off the bottom of
the terrarium. I siliconed together the seams with more aquarium safe silicone and finished off the
housing for the pump. The filter foam will prevent any sort of debris from getting in there
and clogging the pump up down the road. Next I prepped the backdrop using more aquarium divider
grid, attaching it to the glass with aquarium safe silicone. I'll feed the tube from the pump
into this glass jar which will help slow the water and help me redistribute it. This black slate will
be the bottom of my water feature. I had a basic idea in mind and once I knew for certain how I
wanted the rocks to look I went ahead and silicone them to the bottom of the divider grid. This was
one of the more time consuming parts of the entire build process. I did quite a bit of tinkering until
I came up with the final design. Again I hit all of the seams with more aquarium safe silicone
and let that cure. Next I needed to prep the backdrop of said water feature. I used more
aquarium filter foam and pieced it together to give it some volume. This didn't necessarily
need to look pretty and I didn't need to bother siliconeing it down because all I was doing was
filling the empty space before I covered and smothered it with expanding foam. The great stuff
pond and stone expanding foam to be specific. I'll include all the products I used in the video
description. I'll also add links to make it easier for you to find. I gave the expanding foam 24 hours
to cure and this is where things started to get interesting. Now I could really focus in on stacking
the rocks. Shaving depressions into the foam to allow the rock to form into the backdrop. Once I
was sure of the position I went ahead and silicone that down one step at a time. When doing this I
recommend stair stepping the stones meaning you go one vertical and one horizontal. Not only does
this slow the water down but it also maximizes the surface area of water flow. I try to find the most
rigid looking rocks for the horizontal pieces because the water will shimmer really nicely when
it runs along the grooves. It's best to take your time with this and let the silicone cure after
each rock. This way you'll not just ensure that you've got a stable base and prevent slippage but
you'll also be forced to take plenty of time to assess each rock and figure out the perfect piece
for the next step. A great way to keep the substrate off of the drainage layer is to use sheets of
aquarium filter foam. Not only does it allow water to drain through when you're misting your terrarium
but also allow roots to grow through it towards the drainage layer cleaning the water for you
24 7. Since it's porous it's also a breeding ground for beneficial bacteria. And finally
it's super lightweight meaning you'll be able to move this terrarium assuming you drain the water
first. It's also the perfect product for helping you build up the backdrop. It's also perfect for
attaching planters cups because they'll be able to drain. I took more expanding foam and went back
in there and filled up all the gaps. This will force the water to flow over the rocks rather
than spill out behind it. I finished off the can of expanding foam and built up about half of the
back of the backdrop as well as covering the planters cups. One thing to keep in mind, true to
its name it will expand to about twice the size of what it looks like originally. When in doubt
just use extra because you'll be able to shave it off after 24 hours and sculpt it to exactly the
way you want it to look. I finally had the basic design of the water feature down so I installed
the pump and then filled the drainage layer with water. I used distilled water to prevent mineral
and hard metal buildups. I plugged in the pump and this was the moment of truth to see if the
water feature actually worked. I had expected that I'd need to make some adjustments but surprisingly
it worked out perfectly on the first run. This meant I was ready to shave off all the shiny outer
bits of the expanding foam. This is a tedious but crucial step. If you don't shave the shiny outer
shell off you won't be able to attach any silicone or anything else to it. I wanted the waterfall to
look naturally carved as if water eroded away limestone and exposed the harder slate beneath.
For this I used a sand colored aquarium substrate. This would add texture and contrast the slate
nicely. I used cork bark to piece together the rest of the backdrop. This will help retain moisture
but more importantly provide microclimates for the bioactive life. It had taken me quite a while
to get to this point and it was pretty exciting seeing it come together. If you've made it this
far please throw me a like and hit the subscribe because I've got a lot more bioactive builds in
the process right now. Now that the skeleton of the terrarium and my e-begging are complete it's
time to coat the expanding foam with a thick layer of aquarium safe silicone and a mix of sphagnum
moss and cocoa peat. I also attached a piece of spider wood in the corner because it was a little
empty and because it looks cool. The silicone gives a very strong vinegary smell for about 10 days.
When it stops smelling you know that it's fully cured. In order to make sure that the water feature
didn't soak through the substrate rotting it out and making the terrarium smell terrible I trimmed
away some more filter foam. I cut a small hole in the bottom of the divider grid to act as the
drainage hole and also so I could access it with a tube if I ever needed to empty the water. The
filter foam that I'd previously trimmed away from the water feature now was used to build up the
surrounding of said water feature. In order to make it look more natural I added some rock formations
which would also act as a great place for the frogs to perch on later. When I was building up
the bowl around the drainage area for the water feature I wanted to make sure that the banks
weren't too steep. The goal here is to make it easy for the frogs to get out because poison dart frogs
actually can't swim that well. Which is also why I made sure that the water level would never exceed
a couple inches ensuring that a frog could comfortably stand in it with their head above
the water. I took some more of my favorite, you guessed it, aquarium safe silicone and coated all
of the aquarium filter foam. This will prevent water from getting to the substrate. While that
was still wet I added pieces of black lava rock for texture before coating everything in a healthy
coating of aquarium activated carbon. This will give a small boost to the water as it cycles
but in all reality I really just like the way it looks. I drained out all the water to let the
silicone cure. I gave it two full weeks to cure just to be safe. Then I refilled it with more
distilled water so it could start to cycle. Personally I give it at least six weeks so that
way beneficial bacteria can build up before I introduce any animals to the setup. I'm not gonna
lie it's pretty hard to be patient but luckily the setup looked pretty cool even without plants
and animals so I was able to survive. I got my substrate from frogdaddy.net. I layered it in
generously making sure not to spill any into the water section. I also topped off the planter's
cups with substrate giving the plant something to root into and to provide nutrients. I also
sprinkled in some Amazonia aquarium fertilizer for extra nutrient boosts. Oak leaf litter also
from frogdaddy.net went on top of the substrate. This is super important to provide a dry area for
the frogs to jump around on to keep their feet dry. It also provides microclimates for the bugs which
is super important. I added some dried botanicals aka aquarium swag just to make it look a little bit
more complete. These will also break down over time and provide more fertilizer for the plants
but right now they just look cool. I gave the terrarium its maiden misting. I always go super
heavy on the first misting. Not only do I want the cork bark to absorb as much moisture as possible
but also the sphagnum moss and cocoa peat mixtures as well as the substrate itself. It was also
finally time to add life to the paludarium being these tropical springtails. These guys are
arguably one of the most important pieces of this entire ecosystem. They will systematically go
through the entire terrarium eating decaying plant and animal matter turning it into fertilizer for
the plants but more importantly they'll also prevent mold breakouts. Not to mention they're
a great natural food source for the dart frogs to hunt. One of their primary food sources will be
the dart frog waste but until then I added some springtail food to help their population get
started. I hit the terrarium with another round of misting to prepare it for the next step.
While the cork bark and sphagnum moss was still wet I threw a bunch of aquarium fertilizer all
over the backdrop. This was to provide extra nutrients for the wet moss mix that I got from
frogdaddy.net. This stuff is almost like a terrarium sheet code. It has over 13 different
types of mosses and micro ferns that will grow in the most suitable location in your terrarium.
All you have to do is generously splash it all over the backdrop and since there's tons of little
micro climates within a terrarium the most optimized moss or micro fern will naturally
grow in that area of your terrarium making it look natural and easy for you. Here's what it
looks like after about six months in a couple of my other terrariums. Alex from frogdaddy.net also
threw in a couple more plants. Honestly I have no idea what their names are but I went ahead and
planted them in the planter's cubs. I did want to spruce up the water feature a little bit so I
borrowed some Pogostemon hellfairy plants from my vampire crab terrarium. I had purposely left a
little bit of aquarium filter foam exposed for it to root into. I added some more ADA fertilizer
before planting the plants. I repeated the process at the bottom of the water feature. Although
they're technically an aquatic plant as long as they're in a high humidity area they will grow
right on the water's edge outside of the water. I took this Hothmania refugium from the poison dart
frog terrarium that the three dart frogs are currently living in. This is by far my favorite
terrarium plant because of its metallic and orange look and just like that the planting process was
complete. It always looks a little barren at first. Finally I added a variety of different tropical
isopods which would not just act as dart frog snacks but also help break down any decomposing
animal or plant matter. It's important to give the animals a chance to reproduce and establish
themselves and also for the plants to get a chance to properly root in before adding the frogs. I
usually give it four to six weeks. I popped back over to the dart frog terrarium, scooped away some
of the leaf litter, and got a couple handfuls of the bioactive soil to add to my terrarium. It's
full of purple dwarf isopods, compost worms, as well as tons of other bioactive microbial life.
This will help give the entire setup a great head start. Have you ever been in the woods on a sunny
day and it started to rain and everything smelled super fresh? The term is called petrichor and
you'll know your terrarium is fully cycled when it starts to smell like that. I added half a
coconut shell as extra housing for the dart frogs. I topped off some fresh oak leaf litter while I
was at it and went ahead and closed off the top of the water features with more divider grid. It had
been about five months now but it was finally time for the dart frogs to go and explore their new
home. This setup is about twice as big as their previous enclosure and obviously it's got their
very own waterfall. The second frog was a little bit unsure about coming out so I coaxed him out
by misting the terrarium down. The first frog came over almost as if to encourage him out. He was
still a little bit apprehensive so I went ahead and tipped the cup which finally got him out of
there. Together they started to explore the terrarium and I misted them both down with distilled
water just in case they had any debris on them from when I transferred them in that plastic cup.
Finally I went and gathered up the last and final dart frog. These guys are called Tinctorius
azurus poison dart frogs. They're one of the more bold species and usually more readily available
in the hobby. Once all three of them were in the terrarium together they all huddled together at
the very top of the terrarium. This is kind of like their safe spot. They hung out up here for
a while until they were more sure of their surroundings. Then they started to explore a
little bit more. About once a month I hooked them up with a clay mineral bath. I simply mixed the
clay powder with some distilled water. When the frogs take a little plunge they'll actually absorb
the minerals through their skin. Not only is this beneficial for the frogs but as they jump in and
out of the little pond they'll be distributing the clay throughout the terrarium as it's mutually
beneficial for all of the plants. After about the first two weeks I started to see some noticeable
behavior from each of the frogs. This one has his favorite leaves to hide in and always comes out
when I miss the terrarium down. One of the favorite spots for the frogs to hang out is this little rock
behind the water feature. It's almost like they're back there meditating. They take turns sitting back
there and I've seen all three of them do it so far. They also really like sitting on top of the
aquarium divider grid that I use to close off the top of the water feature as well as on top of the
Huffmania refugium plant which is really cool looking. The way the frogs chill behind the water
feature actually really reminds me of the tapestry that I got hanging up in my kitchen. They also like
to hang out in this little hole that they burrowed themselves over in the corner at the bottom of the
water feature. One morning while this dart frog was taking his morning soak I came to the realization
that they probably weren't using the water feature because it was too slippery. I took an electric
toothbrush and surprisingly it worked really well cleaning the rocks off for them. Not only did it
work really well cleaning the algae off, it was actually pretty satisfying doing it. While I was
cleaning the water feature all three of my poison dart frogs were sitting in their usual spot
inspecting the work. A few hours later they came and got a closer look which also validated my
theory that they hadn't been using it because it was too slippery and also silenced all the haters
that said poison dart frogs wouldn't use a water feature. It's been about a month now since I added
the poison dart frogs and they've really settled into their home nicely. Each one of them has their
favorite hangout spot like this one that loves to hang out on top of the plants. They also have a
pretty solid and consistent routine that they maintain. Every morning when I miss down the
terrarium they pop out of their little hiding nooks. They usually spend the first hour or two
exploring the terrarium and I guess just kind of doing laps and getting their exercise in. By the
time they're done with that they're ready for breakfast. I feed them flightless fruit flies
dusted in calcium powder every other day. They usually don't manage to catch all the flies that
I put in there that's why I give them two days to hunt them all down. Once a month I supplement them
with vitamin A plus and two times a month I give them a carotenoid powder. Since I mist the plants
down with distilled water it's absent of any vital minerals so every one or two months I also spray
down a mixture of the clay mineral bath in the spray bottle. This keeps the plants and the entire
ecosystem nice and happy. This terrarium setup was definitely one of the more expensive and ambitious
projects that I took on but it was well worth it. If you enjoyed this project you definitely got to
check out my betta fish polydarium. Don't forget to like, comment, and subscribe. Thank you in advance.
