How to fix a leaking shower head...Part 1

VideoJoeKnows
63 followers
2 Video Views·May 1, 2026
http://www.VideoJoeKnows.com How to fix a leaking shower head.....Part 1 How to fix a leaking shower head, is easy, when you know how. You first have to determine where exactly, the leak on your shower head, is coming from......the top shower arm, the shower head, or the shower head threaded nut. Once you determine where the leak is coming from, you will then go to how to fix it. Sometimes you have to play around with the shower head for a bit, in order to know where it's leaking, so you can then figure out how to fix it. Check out this video to see how "joe" goes about figuring out how to fix the leaking shower head & what he does about it. Does he get the leak fixed?.....ah.
http://www.VideoJoeKnows.com
Joe's on another service call again. I'm in the shower this time and the report was that this
head was
Splashing water all over the place where the nut is on the top
Right up in there. It was squirting around. Let's see what happens. I haven't turned this on yet. So
You're gonna see what happens as soon as I see it. Okay, let's turn this on
I'm not seeing anything. I think they were swiveling this head
Oh, there you go. Let's see. Did you see that? Oh, there it is
When they adjust the head, oh now it's squirting all over the place. Look at that. There's a top nut there
this top nut
Has to be tightened up, but I don't want to just tighten it up sometimes
Believe it or not these nuts. This looks like a metal nut doesn't it?
This is a heavy-duty shower head and this nut believe it or not is plastic
It looks metal and that's one way they could keep costs down if I just crank on that
with a pair of channel locks
You don't know what channel locks are
There are these things here
Okay, I can adjust this out and I can I can get on there and tighten that nut up. Thank you
Okay, I'll just I'll just tighten it a little bit and a little bit and try it again
Well chances are I'm gonna crack this nut or I'm gonna split it and then it's gonna be all over
I'm gonna have to get another one. You can't just go to the hardware store and get a plastic nut
See see next time you're at the hardware store. See if you can get a plastic nut
That's anodized bronze that will fit the shower head. You just can't do it. Okay, so I'm gonna be real careful with this
I'm gonna take this off. I'm gonna remove this nut. What do you suppose I'm gonna do? That's right
I'm gonna put Teflon tape on it. If you know me by now
You know the Teflon tape fixes a lot of things okay try that on your next shower head
Now I might as well give you a tip
We're loosening these nuts. I'm gonna take the channel locks and loosen this up
But if this is kind of tight, I don't want to mark this up any so I can take a little rag
Put over that
And I can adjust the channel locks where I need it
and feel on there and
Now I can hold that and loosen
There it goes wow that's on there, too
Okay, I can hang on to this and loosen the nut. I think I gotta adjust these one more
There that's better
Okay, good old channel locks
Hold this so I can loosen just
the nut jeez
Okay
This one's on there, and it's leaking too. Isn't that amazing?
I'm gonna be careful because I could break the plastic nut
Even okay there it goes
Yeah, see I have to I have to hang on to this or else
I can't loosen that up
So I'm swiveling that but it's just twisting on the knuckle there
And I'm not gonna get it unless I keep loosening up this nut
Okay, so I have to hang on to the shower head
And loosen the plastic nut now are all
Nuts up here plastic no
You just have to be careful when you look at yours yours could be metal
but either way
I don't want to go to this hardware store. Okay now I can loosen that up
Okay
That pops right off
See there's a knuckle there
And then this fits up in there. This is the only thing that keeps it tight
Is right up against that well actually there's a rubber gasket in here, too, and that looks fine
You know you could replace that rubber gasket
You know if yours is really super old this was about seven years old, so I think it's gonna be okay
As long as I get
Some Teflon tape wrap it around this
The same direction as the nuts going because you don't want it to loosen up as you're tightening that you remember
Okay, that's that's the way you want the Teflon tape to go you put it this way when you get ready to tighten this up
You're actually gonna loosen the
Teflon tape on the threads to a certain extent and then it might kind of gum up, and it might make it loose
And it might leak okay, so there's this is a right and wrong way to do just about anything yes
There is you know me by now
There's always
Right in the wrong way, okay?
All right put some Teflon tape on there
You don't know what Teflon tape is
Then if you don't know what Teflon tape is you haven't been watching my channel shame on you
Okay, it's in this little container
And it's just a thin layer of tape and it's called Teflon tape
and it's
Real flexible, so you want to make sure you're careful as you're putting that on okay wrap it the right direction now
I even sometimes have to think about it
whenever I do this because
You want to make sure you're wrapping it the right direction just kind of imagine the nut going back on here and tightening up
So it's going this direction, okay, so so the end of the tape
The Teflon tape once I put it on it and and break it off
I want it to be going this direction, and I'm putting it on right to see if I break it
This is the last bit that's going to be on there, right?
Okay, so I got to kind of hold it on so it doesn't want to slide off at first. I just want to
Get it on there
Okay, now I can I can hold it right here. I can even spin this like this if I want
If I don't I can just keep going. I want to try to keep it tight
So I got it nice and even on there
Want to try to keep it away from this edge
Okay
And now I can pull it tighter
And kind of stretch it because it's not going to slide off right that's going to get right in there and get it nice and tight
right in the grooves
Okay, I want it up a little bit. I can pull it back kind of lift up on it get it right up in there
Okay, a few spins around here. Maybe you know three or four spins
remember
You want to you want to build this up so far that the nut can't get back
But but you want to you want to give yourself plenty
So that it's kind of work, okay, so now I cut that off and it's going this way so now I can just take my hand
Gently, there's any burrs on there. You don't want put those into your fingers your hand or anything. Okay, there it is
Now I can put that back up there
