This Mid Century tall boy looked like a simple flip... until it wasn't. What started as a quick makeover turned into a full blown paint picking nightmare. Layers of paint and primer over poorly sanded veneer left me no choice but to replace the top and go a bit darker than I wanted to. Not to mention WAY more hours than I care to admit.
In this video, I take you through the frustrating, but oddly satisfying journey of stripping and scraping, picking, sanding, patching, repairing, and restoring this Canadian made mid century chest of drawers. It may not be perfection in the end, which annoys me to no end, but the transformation DOES speak for itself.
If you've ever regretted a furniture project halfway through- you're not alone.
If you love furniture flipping, vintage wood restoration, or relaxing paint or no-paint makeovers, make sure to subscribe and check out my other channels: ❤️ @TFGUnplugged – Raw, ASMR-style restorations ❤️ @tfgsnacks – Short-form, quick makeovers
The lighting's a little bit crazy here, but I just picked this up from Facebook Marketplace.
Now, I redid a piece like this several years back when I was kind of just starting out,
and I'm really excited to find this one because I know what's under that paint.
Or so I thought. When I saw this piece on Facebook Marketplace,
being given away for free, of course I wrote right away. One, because I love the style,
but two, because I wanted a chance to redeem myself for painting one of these back in 2018.
Turns out this was way more hassle than I expected. Stay tuned.
My name is Angie, and I refinish furniture. Sometimes I paint, and sometimes I don't,
but I always do what I can to save old pieces from the trash. Welcome to my workroom.
So let's talk about the white elephant in the room here. Clearly, this has been painted.
If you guys are familiar with my channel at all, you know that that doesn't normally scare me.
I do a lot of painted pieces, removing the paint and trying to restore what's underneath.
This is a Canadian-made piece. It's a four-drawer chest of drawers. I'm super thankful that all the
drawers actually work properly for once, and there's no smell for once. It's also really
sturdy. So with that said, basically the entire work is going to focus around getting this paint
off and dealing with whatever I find underneath. Now, these two gold knobs here on the end are
obviously not original, so I'm going to pop those off, and they're still in good shape.
Nothing wrong with them, so I'll stick them aside. I have a huge stash of
knobs, so I'll use these somewhere else. Now, for the three lower drawers, there's no knobs.
They have actual wooden handles, and there's three screws at the back, so I took those screws off,
hoping that I'd be able to take the handle off to refinish these drawers, but that wasn't
happening, and it's not just the paint holding them on. These are actually glued on, so they're
not coming off. On the top, we've got some chips around the edges here. Now, this is all veneer
underneath over pressed wood. The frame is solid wood. The handles and legs are solid wood.
Everything else is pressed wood with veneer. I'm going to be using my favorite stripper here,
and it's the best one that I've tried that doesn't have methylene chloride in it,
but it's still pretty stinky. You want to make sure you're using some sort of breathing protection,
as well as gloves. I like to pour it into a smaller container. I just find it a little bit
easier to deal with and less chance of spillage, and I can usually get five or six uses out of
these chip brushes before I have to replace them. Now, the reason I'm showing this part in regular
speed, even though it's a little bit slow and boring, is I want you to see how quickly this
stripper works on this type of paint. You guys know that I am not anti-paint. I do paint from
time to time. It just depends on what I'm working on, but that said, there's nothing quite as
satisfying as when paint bubbles up like this with a stripper and then scrapes off super easily.
Yeah, but that's not what happens here. There was nothing super easy about this. I was devastated
to scrape that first layer off and find the layer of primer underneath. Now, the previous owner had
said that she'd done this herself and that she was a complete amateur, so I was quite hopeful
that she hadn't prepped at all and just painted over this, but I didn't get that lucky. Primer is
a total bugger to try to get out of woodgrain. The fact that she used a primer made me a bit
nervous that she may have sanded as well, and I know how thin the veneer is on this, so I'm
starting to get a little worried by this point. I thought this was going to be a quick and easy,
super dramatic flip, but now it's becoming a big pain in the butt. Now, to deal with the primer,
basically I scraped off all of the paint that I could and then applied some extra stripper on
those areas that needed it, and you can see it comes right off the second time, but it is an
extra step I was hoping to be able to skip. But as I'm scraping the rest of the primer off the top,
another problem came to the surface. So here's the problem with this top. I don't know if you
can see this. I was hopeful that she hadn't done any sanding prior to painting, but as you can see
here, that is not the case, and it's also quite chewed up along this edge. Actually, all the
edges, which is very common with people just starting out. This edge is particularly bad, so
I'm gonna be pretty lucky if I can get another sanding out of this top. This is not going how
I expected. I'm gonna give you a closer view of what I'm talking about here. If I zoom right in,
and hopefully you can see this, all of these little sander swirls, and these are caused by
an orbital sander and improper sanding. They're really bad here, and then obviously the primer
and paint has settled into those deep scratches, and it's really, really common to see this along
the edge of pieces. It takes quite a while to get the finesse of an orbital sander and be able to,
you know, get to those edges and not wear them down. So I'll come back to that shortly. In the
meantime, I'm going to try to get the rest of this paint off, and it's a mess, can't lie. And don't
forget the drawers. The drawers are a challenge in themselves. You might think, oh, nice big flat
spaces, but around the handles and that little trim piece is actually a piece of metal. It's
gonna be a little bit tricky to get all the paint off from around that. And I apologize, my voice is
a little bit scratchy today for some reason, so hopefully it's not too annoying. So in the
beginning I mentioned that I had done a piece like this before, and I knew it was underneath,
but as I'm scraping this off, I am actually a little bit surprised. I am looking at walnut
veneer here, and the piece that I did was identical in every other way, but it had mahogany veneer on
it, and I ended up painting part of it. There were some issues that I just wasn't ready to
deal with at that point. But yeah, this is not mahogany, even though it's the exact same thing
otherwise. People often ask me what to do with the goop that comes off when I'm using a stripper on
a piece, and you really have to go by your local bylaws. So here, if this remains in liquid form,
it has to go to hazardous waste. But if it's allowed to dry out, and you probably saw a moment
ago there was a piece of cardboard on the ground where I was scraping all of my goop onto, if it's
allowed to dry out, the chemicals in the stripper somehow become inert, and it can go out with just
the regular shop garbage. But that could be different in your area, so you definitely want
to check your local bylaws if you want to try out a chemical stripper. And different strippers could
have different regulations. For example, like I said, this one is methylene chloride free, so I'm
sure that makes a difference. So clearly this is that area that I said was going to be really
difficult to get all the paint off around that metal trim. And then this side, top and bottom of
the drawer face, is exposed press wood under a layer of dark brown paint, essentially. So once I
get all that off, then I can go ahead and try to sand this. Now, like I said, it shows on the top
that she's already sanded this, so I have to be really careful. Although I didn't find a lot of
the same swirl marks and paint staining that I did on the top, so maybe she just kind of glossed over
the drawers. But even after sanding, the paint picking continues. There were white flecks everywhere,
every little divot, every little chip. You can see there's a chip on the corner of that drawer
with some white paint, and then here in the hardware hole, as well as those rattered grooves
in the center of the top drawer. All of this has to come out. If I was painting this, what I would do
at this point is probably not even bother with that part. I would just seal the wood and then
prime and paint, or if I'm using a paint with a built-in primer, I would just paint over the sealer.
What I would like to implore people to do that like to paint furniture, if you've got a rough
surfacing, you have to sand it back to bare wood, and that happens sometimes. Just seal it with
something first, like some shellac or some other coating, to isolate the wood from the paint. It
makes my job, and other people that strip paint sometimes, it makes their job a lot easier, and
also helps preserve the life of the piece. Now normally I kind of skip through and glaze over
these sections of the work involved, but in this case I really want to show you how much work was
involved, because this took almost a week and a half of paint picking and careful sanding, and
you'll see how I deal with the top as well. This was so much more work than I was expecting, and
you know, as a furniture flipper, obviously your main goal is to make a buck, but something happens
usually along the way in every furniture flipper's career, where they kind of evolve, if you will,
from just trying to make a quick buck, to making certain that these pieces have an extended life
and time out of the landfill. And when that happens, you start to become a little bit more
careful about things like this, like painting on raw wood, because not everyone is going to take a
week and a half to pull paint out of every pore of this piece. Just food for thought, if you're
in the business or thinking about it, it's just a quick little thing that you can do to kind of
help preserve the piece moving forward. Now you can see on the back here that they painted the
back side of these side panels, and the problem is the veneer on top has a bit of a bevel,
and because of that, even though I've done the side panel, that bevel with paint is still showing
when you look at it from the side. So I either have to sand the paint off the bevel and expose
the edge of this, or I can sand this back edge of the side panel inward to kind of sneak up
on that bevel line and just eliminate it entirely, and that's what I opted to do here.
Okay, so this top. If you remember, there were a ton of sander swirls. The edges were a little
bit raised, so they had to be sanded flat, which means that in some spots I needed to sand through
the veneer into the press wood to get it flat. Now this isn't always a big deal, and sometimes
you can actually paint those flattened areas. Basically what you would do is you would sand
it smooth, and you can see that area I was talking about here. You'd sand it smooth,
seal it, and then you can actually do some painting with special markers and paints and
pigments to blend that into the rest of the veneer. But there were some other issues here,
and I'm opting to replace the top. That said, let's say this top was perfect except for just
paint. This is how you would get rid of it. Add a little bit of stripper, and using a brass bristled
brush, you just go with the grain until you get all of that paint out. And on open grade woods
like walnut, it actually works really well. And I'll show you in a moment kind of the before and
after of these areas. On a top where you don't have any other issues except paint in the grain,
this is a great way to get that little bit of extra out. This is what that looked like before.
You can see certain angles. You can really see all that paint, and this is what it looks like
after using the brass brush. So it is really effective. And again, if I were not replacing
this top, my next step would then be to deal with some of the residual staining, which you can see
here. And to do that, I'm just showing you what you would do. You would use some oxalic acid. Now,
from this angle, the top actually looks really good, but it's not. It still has a ton of those
swirl marks that are just too deep to sand out because the veneer is so thin. I am going to be
putting a new piece of veneer on. Finally made it down to the legs, but the paint picking continues.
Now, this is a little bit above and beyond. Most people wouldn't bother trying to get
some of that out, but you guys know me. So the frame here is actually elm, and I need to stain
the elm darker so that it will match the walnut veneer. But I don't want it to be a perfect match.
I actually want to make it a little bit darker than the walnut veneer. There's always someone
in these flips that comments, oh, well, you took something that was unique, as in like with the
paint, and turned it back into a brown box. And I see their point. Not everybody likes brown wood.
And this piece in particular is fairly boring were it not for the pulls on the top drawer and
those little metal trim pieces on the lower drawers. So I'm trying to add a little bit of
extra contrast just to give it a little bit more visual interest. So I'm opting to use this water
based stain in the color walnut, and I'll actually be doing two coats of it to get it as opaque as
possible. And I'll also use that same stain on the drawers where that exposed press wood is.
And this is literally what they had before. They just had a thick dark paint or stain covering
that up. But I'm actually going to be using it on the handles as well. And with the two coats,
it's going to darken it up quite a bit and give it a bit of contrast with the walnut veneer.
I always like to clean up the drawer boxes themselves as well. So I just did a very
light sanding and then sealed with a light coat of lacquer inside the drawers. Now,
speaking of lacquer, I'm going to be sealing everything first with easy vinyl sealer and a
lacquer finish. And then I'm actually going to be using that water based stain as a bit of a glaze
to darken up some of the lighter areas. I'm also going to flip this down, do the underside,
and then the underside of these trim pieces as well. No one's going to see it, but that kind
of bugs me. So I added some extra stain there too. As far as hardware goes, I went through a
couple of options that would have been OK, but because of the way the holes are positioned on
the drawer face, I need something that is going to hang down a little bit. Now, I did try just a
normal sort of mid-century style knob, and you can see it would have looked nice had the holes
been centered. But the original hardware on this piece sits a little bit lower. It's kind of a
toggle. And I know this because I've done this piece before. And this middle section here where
you're thinking, oh, that must have been a handle. It wasn't. It actually had two knobs there.
This is the piece that I did back in 2018. Literally identical dresser, except instead
of walnut veneer, it actually had mahogany veneer. And I knew exactly what the hardware
looked like. Now, I love to stash things. So I have this box of old hardware, different styles.
There's a lot of French provincial, some mid-century stuff. But I knew that I had at least
a couple of those knobs left over from another piece a while back. Question is, do I have enough?
Because I need four. So I'm digging through here, and yeah, I see them. This is the piece right here.
I've got one, two, three, four. And it actually turned out I had six. So I still have two in case I need
to replace one down the road. But I was super happy to find the original holes. I don't particularly
like them, but these would have come with the piece originally. And it will help give a little
pop of color or bling, if you will, to an otherwise brown box. And you can see how much better those
hang there and kind of fill that space. They're pretty dirty, so first I'm going to clean them up
using some Bar Keeper's Friend and a 1500 grit Merck Milan pad. And even though the plating is
still okay, I do have to paint those metal strips on the drawers. So I'm going to be spraying these
two just so that the two will match. And the spray paint I use is actually, it's a metal paint.
And it's so hard to find now. I don't know if the company went out of business or what happened.
It's really hard to find this stuff, at least here in Canada. But it is my absolute favorite for
metal paint. And you can see it's not really changing the colors, just kind of enhancing it.
And I'm going to do the same thing with those metal strips on the drawers. Now I didn't really
show a lot of it because it's kind of boring to just watch me spray back and forth for, you know,
15 minutes. But I ended up doing six coats of lacquer on everything and you could see in that
shot the contrast between the handle and the drawer. At this point in the project, I was not
feeling it. I don't know what it was. I don't know if it was just too boring or too kind of monotone,
but I actually hated this piece. And I remember Andrea came out and asked how things were going
and I was kind of in a funk and just really not liking this. But I couldn't really figure out what
I would have done differently. Like I didn't really want to paint it. Not that that would
be the end of the world, but it just wasn't turning out kind of as dramatic as I was hoping.
And, you know, having spent almost a week and a half on it, it just was a bit underwhelming for me.
And because I wasn't super excited with how everything was going, I saved the top for last,
which is kind of unusual. Normally you would do it all at once, but it just... veneer is expensive.
I'll say that. And I didn't want to waste a piece of veneer if I was hating how everything turned
out and was going to end up painting it anyway. But I got this far. And I mean, it's not terrible.
It's just not really my favorite piece in the world. But I decided to move forward and put a
new top on it. Now, this is what I have. And you can see that the way the veneer is cut is exactly
the same graining as on the side. So it's going to match perfectly. This is a 3M backed veneer,
and there's different types of veneer you can get. You can get a paperback, which you would
normally put on with something like a contact cement or some other contact adhesive. I don't
have any of that at the moment, but I do have this. Once I have it cut, I'm going to just lay
it out, make sure I have the size correct, and then I can peel off the backing. Now, you can do this
in segments, which is usually easier to do, like peel a little bit, position it, peel a little bit,
keep going. In this case, it's pretty manageable. It's just a small piece. But of course, I accidentally
let it hit. And you can see how much that sticks right away. And I'm having a bit of a panic moment
there, but we got through it. And I'm going to very carefully put this down. What kind of threw
me off there is that the front is curved a little bit. So if you line it up at the edges without
accounting for the extra depth of the curve, you're going to do exactly what I did and screw it up.
Now, this works by pressure. So I've got a burnishing stick here that I use for veneer.
Some pre-glued options like edge banding work with heat. This is not one of those. This is
by pressure. And you can see it sticks really well. This stuff is meant more for non-porous
surfaces, but I haven't had any issues putting this over other wood. It holds extremely well.
And I'm just going to carefully trim it all, give it a light sanding, and then I'm going to repeat
the process I did on the rest of the piece with the Easy Vinyl Sealer. I did, I think, three coats of
that just to kind of isolate the wood. Now, this Easy Vinyl Sealer is a bit like a primer and sets
you up for the lacquer later on. I usually do a very light scuff sanding with a fine grit in between
just to make sure that everything adheres really well. And then I used a little bit of that same
stain to kind of glaze the top. Now, normally you would use an oil-based glaze, but I was trying to
keep everything a similar color. And then sealed that layer with the Easy Vinyl Sealer before
moving on to the lacquer. Now, there were still a lot of little flecks, and I tried to use a marker
here to get as many of those as I could. It's not a big piece, but when you talk about how small a
pour is, you know, it's hard to get all of the paint out. But I did my best. And I almost forgot
to put these three screws back into the handle that I couldn't remove anyway. But yeah, here we
are. So looking back at what I started with, I had high hopes for this piece. I feel a little bit let
down, and I can't really put my finger on why. Maybe you guys can help me out with that. It just
didn't have the sort of wow factor I was expecting, and the paint took so much longer to remove than I
expected, and that was a bit of a drag as well. Let me know what you guys think of this makeover,
if you would have just painted it, or if you would have done something a little bit different. You are
going to notice it's a little bit darker than I anticipated, but I had to do that to try to get
rid of any remaining paint in the pours. It turned out okay, but like I said, it's not my
favorite piece, and I'm sure you guys can tell just by the tone of my voice. But yeah, let me know what
you guys think down below. I hope you enjoyed the reveal. Thanks for watching, and I will see you next time.