Kramer's Last Video - How We Build Our Takedown Recurve

Kramer Ammons
208 followers
This is the Bob Garner Recurve Bow, we named it after our Grandpa and we make it in the USA.
https://www.shatterproofarchery.com/products/the-bob-garner-usa-made-takedown-recurve-bow
We are for you - Stay Shatterproof!
Archery Questions? We would love to help: [email protected]
https://www.shatterproofarchery.com/
Shatterproof Archery is a small company located in Colorado Springs CO.
We are dedicated to helping more people enjoy more archery.
#shatterproof
#bowmaking
#traditionalarchery
So Kaz wanted to make this goodbye video of like...
Here's where we tell the truth in the most beautiful way possible.
Stay Shatterproof.
And I'm still here though. Can't get rid of me that quick.
I'm at Shatterproof Archery.
Quick history if you don't know.
Started this business in 2019.
Passed it off to my brother a year ago.
I haven't been here for literally a year.
But today, Quinn, the current bowyer, is going to build me a Bob Garner bow.
I'm going to show you that entire process.
Let's go.
I built this bow in memory of my grandpa, Bob Garner.
It was my last project in the archery business before I stepped out.
So I'm going to have Quinn walk us through the process.
I built out this bow making system a year ago.
He's tweaked it, changed a few little things here and there, I think.
So we're going to see how he's doing it currently today.
And then we're going to finish off with a competition where I get to use a Bob Garner bow.
And see who can win that just for the fun of it.
Let's go, baby.
This is Quinn.
He's currently the head of Shatterproof Archery's bow making.
You know, the fun thing is when people come over here,
they're always like, whoa, this is crazy.
You built all this stuff?
And I'm like, ha, no, I did not.
But I get to benefit from it.
This is the fun part.
I get to brag about Kramer's brain.
I sold every single bow that I completed.
And I never kept one for myself.
So Quinn's building my personal bow today.
I'm making a 40-pound Bob Garner bow.
So we've got the wedge, walnut, bamboo, fiberglass, pre-cut, pre-sized.
And the thickness determines the draw weight, as you can see with their handy-dandy chart.
Have you changed any part of this process in the past year?
Yes.
I'm not sure if it's improved, but it's adjusted.
The fiberglass that we've used is different.
And so we had to change the chart for the weights.
And so now...
Do you have thinner fiberglass?
It's slightly thinner, yeah.
Every bowyer does things differently.
And that's kind of one of the coolest things about it.
And I get super technical really quick here with Quinn, so forgive me.
But what we're discussing is being able to ensure
you can hit the correct draw weight when you want to when making a bow.
The main issue is that you can remove material generally to a certain point,
but you can't add it.
You're able to get the draw weight you want more frequently,
but might have slightly more work on the bow.
Correct, yep.
And I'd rather be more consistent and have slightly more work than aiming for a 45
and it comes out as a 42 and then I can't use it.
Do you guys do five-pound increments or are you individual?
No, we do five-pound, yeah.
Yeah, we've had a few people that have requested,
so we'll customize it to them if they are.
Desiring.
Everything's built into a system, so everything's pre-cut
and ready to go pre-sanded, pre-roughed up.
Quinn just cleans the pieces, adds glue, and basically clamps them together.
Because everything's already a jig, he can do this quite efficiently.
A most enjoyable part of the bow building process would have to be
once I've finished everything and I get to start shooting it to make sure...
Yeah, before finish.
So yeah, when I take my test shots just to make sure everything feels good and...
Yeah, yeah, yeah.
I'd say that's probably my favorite part.
I agree with Quinn.
The best part of making a bow is after tillering it
and when you take those first shots and when the shots are dialed and they feel so good,
that is a magical feeling because it's something you've worked on for days or even weeks.
Then it comes together to do the purpose you intended it for.
It's a special feeling.
We'll let the limbs sit overnight in the jig and we'll move on to work on the riser.
What processes do you like to batch and what process do you like to bring one piece through?
Risers and limbs I'll batch on the CNC.
What?
But like tip overlays...
No, I guess everything, yeah.
For Bob Garner batching for bones, I kind of like to go all the way through
because it's much more to manage.
I'm gonna finish sanding a roughly sanded riser so that we can finish out Bob Garner.
This is how it comes off the CNC.
So you can see that it's got two sides that we CNC it on.
So it's profiled first as you can...
Water alarm.
Drink water.
So it goes from here, step one, step two.
Few people that have mentioned the boxiness of the handle.
If you have big hands, it's great.
We've had people that are like, oh, I love how this feels.
But then if you have smaller hands, they say that it kind of presses awkwardly into the thumb pocket.
So we've started rounding and thinning this area a bit more than the CNC machine does.
All right, so we've got the extreme textures from the CNC machine sanded down.
Now it's on to the orbital sander.
We start out with 60 grit and then we work our way up to 100 and then 180 for the finish.
When building a takedown bow, there's critical moments of no return.
I mean, you've got limb alignment.
You've got to nail the tiller.
You've got to have the hardware aligned perfectly.
But sanding the riser is not one of those moments.
And if you build a bunch of bows, it becomes some of the most mundane work
because you're just sanding for a long time repeatedly.
But when you finish it, it generally looks pretty good.
100.
Moving up in the world.
Yeah, these usually are like half the time.
Finished sanding.
Next, hardware, baby.
So we've got the inserts for pins and inserts for screws.
We've started countersinking.
Not really, because we just keep it in reverse to keep it from gripping the wood.
I mean, it countersinks a little bit, but just to keep any chips from coming up.
You can do it by hand, but it takes quite a long time to do it by hand.
Make sure that it's lined up good.
Get snug.
Finish it out.
It makes sense.
We've got to use the glue in the pins.
You don't want to put too much glue in there.
So I like to do like one, maybe two drops.
Get it run down the edges of the hole.
And hammer it the rest of the way.
Sometimes through the wood grain.
It's so wild.
It's a good sign that your hole and your pin are proper sized.
That it squeezes out, but it is wild.
Because it doesn't look like there's any gap, but it'll find a way.
Clean it up with some acetone.
After that, it goes to storage over on the wall.
So they'll sit here and I'll prep those based off of the orders that we have.
So if we've got a lot of Bob Garners, then I'll have quite a few.
I think the most I've had at one time was six, because you kind of make it to order
rather than doing it in advance.
But the goal is to have these in stock and limbs in stock.
So when someone's ordered them, all we got to do is pair the bow to the limbs.
But as you can see, it's an empty wall.
Yeah, it'll take a bit.
Okay, this is the next day.
Let's continue.
The limbs that we glued up have been compressed.
They did their cure time, so now they're ready to go to be sanded
to get the width that we want for the starting point for the limbs for the taper process.
So we'll take it out of the forms.
If I leave it overnight, it's a little harder to get out,
but not impossible.
Some of the valves have a specific spot that you have to put them on.
And we label the limbs with the thickness.
It's faded, but 1.7, so that we know what they are intended to be,
which should be between 40 to 45 pounds.
There's another valve.
So we take this over to the double drum sander, the big lady,
and we will thin them down to, we actually go to like 1.6-ish.
And I found that slightly under 1.6 works for the drill alignment of the holes.
So the depth stop that we use to know that we're consistent with the thickness.
But I also like to use the calipers to make sure it's exactly where I want it to be.
Put in some good tunes.
And then a square, then paper, right?
Yes, yep.
So this is just to get the square starting point for the taper.
So that the thickest that the limb will be in width.
So 1.6.
When you start producing bows for production, consistency becomes a problem.
And you have to figure out how to use jigs to create consistency.
But you also want to be able to make the bows efficiently without too many mistakes.
And as you notice, that's kind of the background of all of these systems,
how do we do this?
Number one, consistently.
So we get a consistent result.
Number two, efficiently.
And then lastly, in a safe way.
Probably safety comes first.
But most of these tools we use are very safe.
Now that we've got the square sanded limbs,
we need to cut the tips and the overhang from the glue up of the material.
And we have a jig set up to get the exact same size every time over here.
And then cut it on our fiberglass blade.
Then we remove all the wrapping and the tape.
And then we add the tip overlays that we glue on.
So I'm going to cut these real quick.
And it is loud.
All right.
Now that we've got them cut and they match in length based off of the water alarm.
Limbs are good.
Remove the wrapping.
And we put tape on it to prevent glue running over onto the fiberglass
because it saves a ton of time from having to sand all of that glue off.
And then wrapping it also just keeps the glue contained and the limbs together.
And we will prep a bunch of tip overlays with hickory and fiberglass.
And I am almost to the point that I need to prep some more.
You always want to sand the area first so that the bond is strong.
It doesn't break.
Having everything within reach is helpful for shop organization.
This is what it comes out looking like.
So we've got fiberglass on one side, hickory on the other.
And we glue them together and clamp them.
That way when we sand it into the fiberglass on this side,
it's a really even blend into the limb of the bow.
So that it looks like it's one piece tied to it.
Get a nice good eyeball center.
And then I actually like to squeeze it with this first.
You make these extra wide so that you can just eyeball and then you'll...
Yeah, yeah.
They are wider.
Wider than the finish.
Yep, yep.
Squeeze, clamp it.
So I just finished tapering these limbs.
And the way that we go about tapering them is we use these sleds that have a pitch on them.
So that we can clamp them into place like so.
And then this has a buck right there.
And then we can send it through the drum sander.
And it'll already taper it as close to even as possible.
So that we just have to touch it up a little bit.
So that the taper corresponds to the tiller being as good as we want it to be.
But most of the time it's pretty close.
You're saying directly off the sled.
Yeah.
Yep, yep.
For the tiller.
So after we put them through the sleds on the drum sander.
We bring it over to our drill presses that we have.
And we've got some jigs set up to where we can clamp it.
In place.
And it's the exact same spot every time for the hardware.
So we can be consistent.
And then this one is for the pin locator.
Same thing.
Clamp it in place.
And you drill it.
Then we come over to the sanding belts.
And I'll round the tips for the tip overlay.
So that it's easier to sand and finish.
Instead of having to deal with more material.
And then we'll also put it on the edge.
So that we get the nice clean finish.
As close as we can without digging into the fiberglass.
The angle of the string groove is dependent upon the recurve of the limb.
Or the shape of the limbs.
And a good rule of thumb is 45 degrees in general.
Glasses are important.
You definitely want those.
But for the initial groove.
You want it to be the depth of the string that you're going to be using.
So it tends to be what this depth is of the piece.
So as long as it's smooth and you're good.
Start there.
I've built many jigs for tip overlays.
And it is the one thing that I've never been able to successfully
make quicker than working it by hand.
And more consistent.
From CNC programs.
To jigs where you slide hand routers through sleds to get it perfect.
I've done so many different things.
But with the fiberglass and wood combo mix.
Hand working the tip overlays with skill has won out.
With that said.
At the hand tool station we buy Dremel tools.
And we get one Dremel tool per bit.
That way we never have to change bits.
And that does help a little bit on the speed.
Once you finish the tip overlays.
I have a test riser.
It's got a crack in it.
So we just use it in the shop to get the draw weight.
Once we get the draw weight.
We label it.
Put it on our wall.
Eventually that'll be stocked.
And then when you have an order that you're trying to fulfill.
Or not trying to fulfill.
That you're fulfilling.
Take the finished riser that you saw yesterday.
Initially these aren't marked as top or bottom limb.
So you'll put them on and check the tiller.
And then you want it to be positive ideally.
So that'll switch limbs if it's not positive initially.
There's a few different ways to design a bow to get it to shoot well.
Normally you have the upper limb bend a little bit more than the lower limb.
And this normally is accomplished by having a longer upper limb.
But another way to do this is to make the limbs the exact same length.
And adjust the angle the limbs come off the riser.
So the angle is steeper coming off the top limb.
Introducing an automatic positive tiller.
With having the upper and lower limb nearly interchangeable.
This makes it a little bit easier in production.
We still assign an upper and lower limb.
But we don't assign it until the tiller's proper.
We've shot the bow and we know it's dialed.
We're at 42.
So right around 43.
But that does drop it to 40 pounds.
Which is what I was expecting.
Okay so with the final sanding you're going to 40.
Yep.
So that's basically dead on.
Yep.
Right on for 40.
Because I'll thin out the point on the edges.
Run the orbital sander all around it.
Shape these to the finish of the riser.
And then I can show you the two that I finished yesterday.
So this is how it gets strapped together.
This is a bow that we are sending a new set of limbs with.
Because they wanted to upgrade the limbs.
Which you can do.
So the riser's already finished.
Except for a touch-up spot that I'm going to refinish.
And then we have the limbs labeled.
45, 55.
We've got these handy dandy stamps.
And the shape of the edge of the limb determines.
Right now determines where it goes.
Stamp ink.
Put it in the jig.
There you go.
And from there we'll clean the rest of the limbs.
The riser.
And since this is all one set I'll do it all together.
Clean those limbs.
Stamp those.
Then we bring it over to our booth.
And in here we've got our finish set up.
So Kramer built this cool spinny thing.
And this is for our bones bow.
And then for all of our Bob Garner bows.
We've got this rack.
And these metal hooks that go into the hardware holes.
So the bolt holes.
So we'll have the top limb up here.
Bottom limb down here.
And the riser.
So just take one.
Close the curtain for overspray.
Put it on here.
And then just spray it with our spray finish.
So once it's finished sprayed.
This is what it looks like.
And then we will package up the limbs.
And these sleeves.
And we'll add the felt piece for the spacing.
And then we add all the hardware that you need.
The custom string.
Everything included in the kit.
Goes on the shelf if it's extra.
Otherwise I don't want to show their name.
But we'll write the person's name.
What order it goes with.
And then it gets fulfilled and shipped to you guys.
So that's the Bob Garner process.
Back to glue up another one.
Yep.
So I couldn't leave without shooting a Bob Garner bow.
So we decided to do a fun little competition with some of the guys working around the shop.
I think we had six people.
So we did short range competition.
Winner moves on.
And well it got to the last three people.
Me, Quinn, and Kaz.
Closest to the bullseye got a point.
And we were all tied at 2-2-2.
So the next one with the closest shot wins.
It's like right on it.
Oh man.
I'm best in this practice.
Good shot.
And Kaz got it.
Yep.
Kaz got us.
He won by one inch.
See ya.
One last shot.
If you hit the bullseye.
Down with archery forever.
Thank you guys.
Thank you.
Guys.
What do you want me to say?
Look at the camera and speak from your heart.
Thank you.
Thanks for watching.
We appreciate all of you.
With that, stay shatterproof.
And we'll see you on the next one.
