Part 2: Crash Testing an Ambulance

CDC
258 followers
Apr 30, 2026
This video was originally released in May 2017. Part 2 of 7: Crash testing ambulances uses the same methods applied by the automotive industry when testing cars. This video provides viewers with an understanding of ambulance full vehicle crash testing, and how results impact future design and testing efforts. This series, Improving EMS Safety Through Ambulance Design & Testing, covers new crash test methods to improve worker and patient safety in an ambulance patient compartment. It was jointly funded by NIOSH and the Department of Homeland Security's Science and Technology Directorate. NIOSH (DHHS) Pub. No. 2017-143(2)
In the early 2000s, NIOSH began investigating opportunities to improve occupant and worker
safety when in the patient compartment of a moving ambulance by crash testing a variety
of ambulances.
Crash testing ambulances allows engineers to better understand how the structure reacts
during front, side, and rear crash events.
This module covers the value of crash testing in the design process and explains the underlying
characteristics and testing methods used to evaluate an ambulance in front, side, and
rear crash testing.
You'll also learn how data collected from these tests serves as the basis for developing
safety innovations in the patient compartment.
This particular project started out as a small government effort, but as we got involved
with the industry, we saw great opportunities together.
The goal and the overarching goal, if you will, between the government and the ambulance
industry was to provide as safe an environment for that particular ambulance as there would
be in the car.
We saw that we had addressed a lot of the safety issues that you could logically see,
but once you involved an ambulance in a crash in the same kind of ways that we've crashed
passenger vehicles for years, I think there were some basic light bulbs that went off.
It has given us the credibility, most importantly the credibility of standards that allow us
to provide a safer vehicle through facts, through scientific evidence.
Crash testing for the ambulance program follows the same exact protocol as it does in the
automotive industry.
For example, performing a vehicle frontal collision, we perform that test with the vehicle
traveling 30 miles per hour into a concrete wall.
During a crash, some of the energy is consumed as the front of the vehicle is crushed.
However, much of that energy is still actually transferred through the vehicle body to the
back of the ambulance.
During a crash, we were able to measure that energy on the floor.
We can now recreate that energy or force in a lab to design and test a cot, seat, or equipment
mount without having to crash more ambulances.
30 miles per hour a lot of times doesn't sound very fast to people, but you have to
understand that the vehicle is going from 30 to zero in less than an eighth of a second.
The G-forces and the energy transfer are extremely high during that time period, much, much higher
than what would be seen in a typical neighborhood crash.
These new standards that we're talking about that are part of the collaboration with not
only NIOSH, but other government agencies, Homeland Security, GSA, NHTSA, and a whole
host of other parties too.
We've had direct involvement from the chassis OEMs, from Ford and General Motors, from automotive
test facilities that have some very, very incredible talent in motor safety.
We've been able to get, more or less, kind of a dream team together in this research
forum to help create these standards.
Knowing how the vehicle responds during each of these crashes, engineers are better able
to design other interior structures that can handle the unique loading found in these larger
vehicles.
Test engineers installed accelerometers on the vehicle frame patient compartment floor
and ceiling in a specific pattern.
Data collected with these accelerometers is used to find the vehicle's impact curve, allowing
engineers to form the crash pulse corridor, which can easily be recreated in a sled test
facility.
Using the vehicle's crash response, or crash pulse, engineers now have the building blocks
needed to design and test seats, cots, equipment mounts, cabinets, and the body itself so that
each component can better withstand the real-world forces found in a crash event.
Frontal impact testing of the ambulance consisted of three ambulances which were crashed into
a fixed concrete barrier at 30 miles an hour.
These tests matched the testing requirements used by the Federal Motor Vehicle Safety Standard
FMVSS 208.
Data from these tests has been published as SAE J2917.
Now that we have characterized the energy in a frontal crash, we can recreate that crash
on a sled and test a single seat, or a cot, or an equipment mount for far less cost than
it takes to crash an entire ambulance.
Side impact testing of the ambulance matches the testing requirements used by the Insurance
Institute for Highway Safety when testing passenger cars, vans, and light trucks.
This is the same test that is used for their five-star crash rating system.
We performed four ambulance side impact crash tests, and each test, the 3300-pound moving
deformable barrier impacted each ambulance at 31 miles per hour.
Data from these tests has been published as SAE J2956.
Recognizing the potential for injury from a rear impact, as well as a rebound from a
frontal collision, the team also performed rear crash testing.
Rear impact testing was completed using a modified version of the side impact test of
the Insurance Institute for Highway Safety.
The team used the same 3300-pound moving deformable barrier and impacted the rear of both modular
and van-style ambulances.
Data from these tests has been published as SAE J3044.
Full vehicle crash testing provides ambulance manufacturers and suppliers with the information
they need to improve the crash worthiness of their products.
All of this has been completed with one simple goal in mind, to provide you with a work environment
that helps you be as safe at work as if you were traveling to work in your own car.
So the next time your agency is thinking about purchasing a new ambulance, please work with
your manufacturer to make sure that the seating, cot, and the other major components have been
crash tested.
