Part 7: Using the Ambulance Patient Compartment Human Factors Design Guidebook

CDC
258 followers
Apr 30, 2026
This video was originally released in May 2017. Part 7 of 7: Are you an ambulance designer, buyer or EMS worker? This video provides important information for designing the patient compartment so workers can remain seated and restrained while still attending to their patient. This series, Improving EMS Safety Through Ambulance Design & Testing, covers new crash test methods to improve worker and patient safety in an ambulance patient compartment. It was jointly funded by NIOSH and the Department of Homeland Security's Science and Technology Directorate. NIOSH (DHHS) Pub. No. 2017-143(7)
As a companion to the work done to improve worker and patient safety
through crashworthiness, the team recognized that to fully implement these
changes, the layout of the patient compartment had to change. For example,
for a new seating and restraint system to be effective, the practitioner actually
needs to be seated and restrained while treating patients. To accomplish this
goal, the U.S. government partnered with representatives from the EMS community
to better understand the job duties and tools involved at each level of service
BLS, ALS, and transport. By understanding these things, engineers and scientists
were armed with the information they needed to develop a design guidebook
that could be used by any level of service. The guidebook will help EMS
organizations design a safe and efficient patient compartment so that
practitioners can stay seated and restrained while treating a patient.
This module will help you understand how an efficient patient compartment can
improve your overall safety. The first step in the process is to really know
your service, and once you understand the needs of your service, you will have the
tools you need to design the right ambulance for you. One of the things that
we're talking about in this video series is the development of new patient
compartments to improve worker safety, but also improve patient care.
Interiors of ambulances are going to change, and instead of taking an
outside-in approach to design, where we would look at equipment and where the
equipment needs to go and then build in and somewhere fit in a medic and a
patient, you're now seeing an inward-out approach. You start with keeping a
patient safe, you start with keeping a medic safe, and then you build that
environment around them. And so with that becomes a whole host of new
opportunities and new ways to approach vehicle design and vehicle safety.
Identify what you want to achieve, and I think that was our starting point as
what we wanted to achieve is a configuration that ensured that the
paramedic was seat belted during the transport phase and could still touch
their equipment. By having things within reach doesn't necessarily compromise how
we take care of the patient, but it's smarter. It's a second thought.
We need it to be a primary thought in the sense that primary seating position,
what can we do without moving, and the positive end is it becomes safer. The
first step in trying to design a safer and more efficient patient compartment
is to understand the primary duties of your service. Do you run advanced life
support calls or are you a basic life support or intrafacility transport
service? Before you start designing, you really have to know what your service
does. What type of patient do you treat most often? How far do you travel to the
hospital? How often do you transport more than one patient? Where do you most often
sit? Where are your equipment and supplies located? Can you reach the
controls for the lighting, HVAC, and communication? Do you have to get out of
your seat to reach the patient? What works and does not work in your ambulance
today? Often you already have this data within your system. The first task is to
mine this existing data. When you're reviewing your call volume and call type,
think about where you prefer to sit, where you are best able to monitor an IV
or take your patient's blood. Do you prefer the ability to see your patient's
face to ensure they're comfortable and relaxed? If your preference is to sit
next to the patient's chest to accomplish these tasks, then this might
be the best location to be identified as your primary care position. That primary
seating position should have within arm's reach the controls, the operations
that you need to have in the back of the ambulance, whether it be as simple as
turning on the oxygen or turning on a specific light or suction or any of
those critical components you need to have within arm's reach. Pulling your data
actually allows you to right-size your ambulance versus buying an ambulance
that is overbuilt and with items and infrastructure that you don't
necessarily need. One of the tools the government is providing you to help you
design the ambulance that is right for you is the new ambulance patient
compartment human factors design guidebook. This guidebook provides you a
step-by-step process to design an ambulance with safety and efficiency in
mind. The design guidebook is a tool for that EMS service to design their next
ambulance based on their needs, not the needs of everyone else. Today with the
book actually asked the questions of the people that are buying the ambulance is
okay what's going to work for you? Do you need to be able to carry two patients? Is
the equipment that you use most often, is it reachable? So in using the guidebook
we really didn't intend for it to be a very complicated way of designing an
ambulance. We really do envision provider organizations to sit down with either a
pen and paper and draw out the design they're considering or we've seen and
we've actually done sat down and mocked up a compartment in just an office using
chairs and tables and cardboard boxes. If you think of the layout using a single
patient model, where are you going to locate that patient? Where are you going
to work most of the time when you have that patient? You have just identified
your primary patient care position. Now that you have identified the primary
patient care position, what tools do you use most often? How much space do they
take up? Where will you locate them? And don't forget about the lighting and HVAC
controls and your communication tools. These all need to be within reach to
ensure that you're able to treat your patient while seated and restrained. If
you traditionally run two people in the back, some of these can be duplicated in
two locations so that you can work as a team. Take your time. Look at every
possible layout even if you don't think it will work. Look at demos. Get
everybody's input. Talk to people from all over the place and then look at your
call volume and your demographics. Where are you spending the majority of your
time in the back of the unit, in the back of the ambulance, treating the patient?
And then let's design around that area first and foremost. Then tell me where
your secondary and third options are going to be if there is a third option.
And then move controls over there if need be. And it's no different than if I
move into a new office and I get a new desk. I'm going to put my computer where
I'm going to be sitting and facing that screen. I'm going to put my phone next to
it. I'm going to lay out my desk area so that it makes sense and fits me for the
I'm working. And we want to ask the same questions of the end-users and the
paramedics and EMTs where they're going to be, where they're going to spend the
most of their time and put the tools around them so that they don't have to
get out of the seat and they can stay belted in and be safer where they're at
and still be able to perform the functions of their jobs. The takeaway
message from this module is that your next ambulance has to work for you. The
good news is that you already have the tools to make this happen. You know your
on history, you know what works and doesn't work in your ambulance, and it's
up to you to put the pieces together. We encourage you to utilize the Ambulance
Patient Compartment Human Factors Design Guidebook to design your next ambulance.
