How to apply sealer to a brick wall...Part 1

VideoJoeKnows
63 followers
Apr 27, 2026
http://www.VideoJoeKnows.com How to apply sealer to a brick wall (Part 1) is easy, when you know how. Do you need any special tools for how to seal a brick wall? What type of sealer should you get, for sealing a brick wall? I don't know how to paint, is it that difficult to paint on the sealer to a brick wall, or is there something else you're suppose to use? These questions are answered in this howto video on how to apply sealer to a brick wall. You can do it! http://www.VideoJoeKnows.com
Bet you were wondering what we're going to do today.
Remember my brick I cleaned?
I'm going to seal this today.
I want to show you how to do it.
It's not very hard.
Okay?
If you want to watch that, stick around.
This is what I'm going to use.
Behr Premium Protector and Water Proofer.
It's a concrete masonry brick sealer.
And this is natural.
You can get all kinds of different sealers at the store.
This was about $22.
Anywhere between $20 and $30 you should be able to find this.
Okay?
I'm going to end up putting two coats over the brick.
And it's going to give it a nice look to it.
This is the old style used brick.
They want to freshen this up a little bit.
And this is the way we're going to do it.
Ah, the life and sounds of the neighborhood.
Hey, I'm not going to let that stop me from doing this.
Okay?
Now, all I'm going to use is a 4-inch paintbrush.
And it's a throwaway brush.
I got it at the store for about $4.
I thought I had a paint container over here.
But I didn't.
I looked through the garage over here.
And I've got just a little bucket here.
So I'm going to pour the sealer in there.
And I'm just going to dip and put it on with that.
With the paintbrush.
Okay?
There's different ways you could do it.
You could use a roller, a mini roller, a weenie roller.
A little paint tray if you wanted.
But see, I don't want to get any on the concrete there or anything.
And it's just a short little brick bay window.
See there?
That's all I'm going to do.
And I figure I can do this with the paintbrush.
It might take me a little bit longer.
But then I can cut in up around the window.
I've got to cut in around the side at the bottoms anyways.
So one little paintbrush.
A throwaway paintbrush.
Such as that one right there.
And you can do it.
4-inch paintbrush.
You could use a 3-inch paintbrush too.
And I'm just going to dip it and go.
Now, be careful.
It's not going to take me very long at all.
It's a nice hot day today.
And this, luckily for me, is still in the shade.
So I want to get going on this.
Get the first coat on there.
Okay?
So I'm just going to dump this in.
I guess I didn't have to do that.
Maybe I should just shake this a little bit.
Just going to pour it in my little container.
Now it looks a little milky, but it dries clear.
Okay?
That's all I'm going to do.
I don't want to fill this up too far.
Okay?
That's it.
Ready to go.
If you've never painted before, it's not that hard.
You just kind of want to put it up there.
And be careful with it.
This will give you some good practice too.
When you get ready to put...
When you get ready to paint on your wall or something,
I'm just going to saturate it as much as I can.
Make sure you get everything, you know?
Even the joints.
That's going to look good.
It's going to give it that wet look.
Just take your time.
I can do this.
Anyone can do this.
If I had a longer, bigger wall, the whole side of a house to do,
or something, I'd use a roller.
That's going to look good.
Let's just do some more down here.
Shake it out a little bit.
My aunt doesn't know I'm over here today.
I'm doing this as a surprise for her.
She wanted it done.
After I cleaned it, she thought it needed to be spruced up.
For just a little over $25, the paintbrush and the sealer,
I can get this done for her.
I'm going to put a little bit more on.
You can do that.
I'm going to let this one coat dry.
I'll read the directions.
It probably says a couple hours.
If it's in direct sunlight, you probably don't need to have it.
You don't have to wait that long.
You'll be able to tell once it's dry.
Do the touch.
If it's in the shade, I'll let it wait for a while.
But as I go, when I get done with this,
when I get done with the entire thing,
it might be 25 minutes or so.
Then when I get ready to start again,
I'll start over here and work my way back to the left.
Then I don't have to wait as long.
That's going to look sharp.
When you're cutting in,
you just want to work down here and slide it up.
Just be careful.
You'll get the hang of it.
It's really easy.
If it wasn't easy, trust me, I wouldn't be showing you.
That goes for just about anything on my channel.
You see me doing it.
More than likely, you can do it too.
You just have to saturate the joints a little bit more than the brick.
Let it soak in.
If you've got to, put more on there.
It's not going to hurt.
Saturate that.
You can do this.
Just kind of push the sealer off your brush like that.
Don't wait to pay somebody else to do this.
You want to freshen up your brick.
What a perfect way to do it.
See down here, there's some old concrete.
I'm wondering if I should just go ahead and seal it.
I think I will.
Just that little bit up to the sidewalk.
Might as well make it look all the same, right?
If that was the entire sidewalk,
I would try to keep it off the sidewalk.
See how it's already drying?
It's only been a few minutes on this side,
and it's drying a little bit.
You're going to see, it's not going to stay this wet all the way,
because the first coat is sucking right into the brick, right into the mortar.
We're going to have to put another coat over this,
and then you're going to start seeing a difference.
I'm going to keep working on this.
I'm going to work on this section right here now,
and I'll be right back.
