Sealing a brick wall 2nd coat...Part 2

VideoJoeKnows
63 followers
Apr 27, 2026
http://www.VideoJoeKnows.com Sealing a brick wall 2nd coat (Part 2) is easy, when you know how. You don't want to just seal a brick wall with just 1 coat of sealer. You need to apply at least 2 coats of sealer to your brick wall project. Can I use just a paint brush to apply the 2nd coat of sealer, if the brick wall is not very long/big? Of course!
http://www.VideoJoeKnows.com
Man I almost forgot. Here's another good reason to seal your brick. You know when it rains it's
going to bead up off of your bricks off of your mortar joints and all that. It'll keep your
mold and mildew fungus build up at a bay and it'll just protect you a little bit more.
All right. There's two good reasons why to seal. Get a nicer look on it and to protect
your investment. Okay I just got the second coat applied. That's why I started over there. See how
it's drying. It's a little bit wetter this time. This one's still drying but I really like that
left hand side. I kind of like that look better than over here. But you know when it dries all
the way it might look just nice. It gives that little bit of a glow of the used brick look.
You get it too saturated. See over here I just put this on. Now see that doesn't look bad.
Looks pretty good actually. If it were to stay that color that's fine. But it's going to dry
and it's going to be a little lighter. I think I like it a little bit lighter
because then it shows the character of the brick a little bit more. Because this was a used brick
you're going to see a lot more lighter cut, lighter bricks, darker bricks, off-white bits and that
kind of thing. You know just depends what you want. When you go to the store they have different
sealers. If you want a really glossy look you can do that. Or if you want just a matte finish you
can do that. Just depends. Now on a wall you're going to have to put more coats even if you put
a glossy because it's going to want to run down. It's not going to set like right down on the ground
like if you were doing a sidewalk or something you know. But I'm going to let this dry a little
bit longer this time. I've got two coats on there now. I'm going to make a decision whether or not
I'm going to put a third. Well the second coat's dried all the way and I'm looking at this closely.
This brick is oh geez I don't know 25 years old I'm guessing and it looks pretty good.
But I think I'm going to put another coat on here. I've got plenty of sealer left. It's not
going to take me as long now. About the same maybe a little bit longer. Shorter time I mean
to put it on this time. I may not have to saturate the joints as much. The brick surface
I want it to look a little bit more coated. See there's a few little dots on top of the brick
there. That's because these bricks are so old. It seems like it's taking a while for it to
saturate them all and I think this third coat's going to do it. Now if I was doing a whole entire
house let's say, when's the best time to seal brick? They say after about 30 days after you
install it. Okay you don't want to do it too quick because you want the mortar joints to cure and all
that. You want the sealer to adhere properly. So read the directions on the containers before you
seal your brick. Well I guess I better get at it and apply the next coat. This will be my third
coat and I think that's gonna do it. That's more like it. See that was my third coat. See how
much more I was able to put on there and make it look a little bit darker.
That's how I wanted it. Okay three coats on this. Your brick might not need three coats.
Look at your container like I said and it might depend how old your bricks are.
That's it from here. Man I almost forgot. Here's a tip for you. I know this is just a throwaway
brush. Okay but once it gets sealer on there you could rinse this out. You know with water
and just get most of that sealer off and you know you could use that paintbrush again for something
or if you forget to do that and if it stays stiff and you want to put some more
sealer on later on down the road you could still use this paintbrush. You're gonna have to dab it
in your sealer a little bit and work it around a little bit and then it will soften up the bristles
then you can use your brush. Okay good way to recycle your your brush. Don't throw it away yet.
That's all I got for this time but I'll be back with more videos.
