8 Must Know Jewelry Making Techniques to Get Started

Handmade Jewelry
2 followers
205 Video Views·Apr 28, 2026
Today I'm going to be showing you eight essential techniques that every beginner jewellery maker
should know. But even if you already make your own jewellery, you might find some great tips
and tricks to improve your skills. Hello, welcome to The Stylish Maker, my name's Carol.
Today we are talking really basic techniques to get you started. We are going to be talking design,
stringing, crimping, clasps, extender chains, jump rings, loops, air wires. So that's my eight
basic techniques, and along the way we're going to be making three projects. I'm making a necklace,
a bracelet, and some earrings. I'll talk you through all the materials you need,
as well as the tools that you need. Let's start by looking at the tools I'll be using.
To make these projects you will need four tools. You will need a pair of round nose pliers,
you will need two pairs of chain nose pliers. So the chain nose pliers, make sure that they have
a flat interior here. You do not want the ones that you get from the hardware store that have
a serrated edge inside. You want them to be nice and flat. And I have two different pairs here,
I will link these below. And I also have a pair of flush cutters here. These are a Xuron flush
cutter, these are my favourite, but I'll link you a pair of less expensive ones as well if you're
just starting out. So those are all the tools that you need to make these projects. First we're going
to make the necklace. So let's have a look at the materials that you need to make that. Now I've
already strung up my beads here, just so that you didn't have to watch me do that. But I'll talk you
through what I've done, and I'll also talk you through what else I am using. I'm also going to
be using a bead board for laying up my necklace. Now this isn't essential, but it does make life a
lot easier. It has measurements in both centimetres and inches, and that makes life so much easier
when you're trying to get your necklace the right length. It's also got a flock finish, so your beads
don't slide around on it. I'm going to be using two of these bead stoppers. Now a bead stopper is a
spring that has handles on it, and you squeeze it, and you pop your wire on there, and nothing falls
off. I'm using two of them, one on each end of my wire, but you could use one, or you don't even need
to use them at all. It just stops your beads falling off. Yesterday when I was preparing this,
I went over to the mirror, and I dropped my necklace, and it didn't have its bead stoppers on,
and the beads went all over the floor, so I had to start my design process again. So they're quite a
good inclusion in your toolbox. You're going to be needing some beads. Now I used exclusively
Jesse James beads, except for the beaded rondelles, or daisy spacer beads. That is this one here,
and these are a good filler bead, and it just allows some accent of silver throughout my
necklace. I used this beautiful focal bead from Jesse James. It's absolutely stunning, and it is
quite a large piece, and I'll talk to you about how to work that in in a minute. I also used another
bead strand, which had these white, grey, and these pink beads on it, and the rest of the beads came
from this Jesse James pack, which is a Market Fresh Mini Mix. The colors are Baby Blanket.
That's what's left of my pack. As you can see, it contains beautiful white, blue, gold, silver,
clear, and obviously pink, and it had some yellow in it as well. Other materials I have, I've got
two tiny wee crimp tubes here. A crimp tube is basically a tiny wee tube. This is a two millimeter
crimp tube. I have a little charm. This came in the Baby Blanket pack. I'm going to put that on the
end of my extender chain, just to make it a little pretty. I've got two different size jump rings. I
have a four millimeter one, and this is a six millimeter one, and it is soldered closed. You'll
understand more about that as we go through. This one is a piece of chain. It's about five centimeters
long, and I have a lobster clasp as well, and I've strung my beads onto a piece of tiger tail. It is
a very strong beading wire. It is made of 19 strands of very fine wire that have been spun
together and covered with a nylon coating, so it's very strong, but your beads slip nicely on it,
and it is a very cheap beading wire, so it's good for lots and lots of projects, and this is a 0.38
millimeter. I will leave you links in the description box to all of what I've used here. As you can see,
I've already laid out my beads because I wanted to make sure that I got a really nice design for you.
So I wanted to talk to you a little bit about the design and why I put the beads where I did. So
obviously, I started with my focal bead. So this is the bead that attracts the attention in the
necklace. Being such a stunning bead, I only wanted to use one, and it just works really well as a
What happens when you use a really large bead like this is you need to step down to the next
size bead and then to the next size bead. You can't just go from a large one to a small one,
so I decided to use these pink ones, and then I used these beautiful round discs, and because
they're fairly similar in their diameter to this large bead, it steps down through the process to
the smaller beads. I used the pink because I felt that the white next to the pink one here,
just didn't highlight the pink bead, so that is why I used these ones. Then I popped in some yellow.
Now, I popped in some yellow because there is yellow in this bead here, and I only put four
yellow beads in, partly because that was all that was in the box, but also because I really wanted
to make that yellow just a little hint rather than a full story. Next, I went with these beads. Now,
I wanted to put these gray ones in here to add a little bit of contrast, and most of this necklace
is, as you'll see, the same size beads. It's mostly these beads here. I did insert some beaded rondelles
between these ones, just to give that little hint of silver. This is a 10 millimeter bead, so it is a
little bit larger. It is just a little shade of pink. It's mostly transparent, but it does have
a little bit of pink in it, so it married in with the rest of the beads, and then I popped in my
next yellow one, and this one here was also in the pack. It is faceted, so it's got that nice
cut look to it, and it's slightly larger than these ones again, so just adding a little bit
of interest with different beads. If I had left this one out and just used these beads, this wouldn't
have been such an interesting necklace, and then I did just go with these. Now, you will notice that I
didn't use the same pattern. I went white or cream. I don't know what color it is. It's a creamy gray
color. We'll call it white. White, gray, white. Then I went white, and then up here, I put another gray and
a pink, and then a gray and a white and a pink, and a white and a gray, so they're never in the same
order, and that adds interest as well. When I got to the back here, I stepped down into a smaller bead,
so I've got this one here, this little pink one, and then I've got this hexagonal bead, and then some
more of the pink, and this one here, which is all clear, and at the back here, I just added another
couple of the beaded rondelles, just to tie in the fact that I'd used them at the front. So this necklace
is going to be 42 centimeters, because it's 21 on either side. Now, generally, I like my necklaces to
be between 43 and 46 centimeters, so my clasp will take up about a centimeter, which will make it
about a 43 centimeter necklace, but I'm adding an extender, because when I wear turtlenecks or
something like that, I like to have my necklace longer. I also might like to wear it on the outside
of my shirt, for example, if I do up my top button, so I always like to try and add an extender to my
necklaces. If I don't add an extender, I have a little trick to add an extender chain, what I call
an external extender chain, so I'll leave you a link for that video down in the description boxes
as well. With this wire, you don't need a needle. It's strong enough that you can just pop it through
the hole in your beads, so you don't need to worry about that. Now, obviously, you just string your
beads on. I like to start at the center and string outwards, but that's just a personal preference.
You could string from the side as well. Now, I'm going to take my necklace off my design board, and
I'm going to show you how to attach your clasp and crimp and all of that sort of thing. Before we do
that, though, what we need to do is check that we have the beads the same on either side, because
it's really easy when you're designing a necklace to put them one way on one side and a different
way on the other side, and that's fine if that's what you intended. That's not what I intended with
this necklace, so we need to make sure that we check. So what I do is I hold my necklace up here
with the two pieces of wire together, and then I pull the focal down, and that allows me to go
through and check that every bead is in the right place. So as you can see, it's all perfectly strung,
so all my beads are in the same place on both sides, so that's a good thing. The first thing
we're going to do is add a jump ring to our clasp. I'm taking my two pairs of chain nose pliers, and
I'm going to take my jump ring on the side with one pair, and on the other side with the other.
Now the split is away from me, and I'm going to turn my hand down. So all I did there is twist my
hand like that, and then I'm going to pop on my clasp. Now I always attach my clasp with a jump
ring, simply because if your clasp fails, you don't have to re-string your necklace to replace it.
Right now to close it, you just hold it on either side, and you basically reverse that process. Okay,
so I've got a gap in my jump ring, so what you do is you hold it on either side just the same way,
and you lift up and down, pushing your right hand towards your left hand until you feel it touch.
There's my clasp with the jump ring attached. Now I have an episode all about how to use jump rings,
so I'll leave that one linked below for you as well. All of the techniques that I'm showing you
here today, I have done episodes fully dedicated to those, so I'm going to leave you a lot of links
for this one. I've got my clasp, and now I need to add it to the end of my wire. So I'm going to take
my bead stopper off, and I'm going to pop on a crimp tube. I like to go fishing for my crimp tube.
I like to put it down on my mat and thread my wire through it. It's much easier than holding it in
your hand trying to poke your wire through, in my opinion it is anyway. And then I'm going to put on
the jump ring that I just attached to my clasp. So that's what I have, and now I'm going to take my
end and I'm going to go back through the crimp tube, like that. Now there are things I could do
to make this better. I could use a wire guardian or some French wire and that kind of thing, but I'm
showing you the easiest way to do things today, just because this is meant for beginners, and I
think it's good to show those basic techniques. Now what I'm about to show you, I sometimes get
into trouble for saying. Because this is a beginner video, I'm actually going to show you the easiest
way to squeeze my crimp shut. There are other ways to do it, and I will leave you a link to a video on
different ways to crimp, but this is the easiest way if you're a beginner. So what I'm going to do
is take my pliers, and I'm going to pop the crimp tube inside the pliers like that, and I'm going to
squeeze. And that's what that looks like. Now most people would go ahead and use their crimping
pliers to fold this in half, but today we're not doing that. We are just going to squeeze it flat,
because this is the beginner way to do it. Some people will say that this won't hold, but it does.
You can see I'm pulling on it, it's not moving. You don't need to add glue or anything like that,
it is just nice and firm. And the reason it's nice and firm is that this side of the crimp tube,
and this side of the crimp tube, basically what they've done is they've held encased that wire,
and then it's flat in the middle. So they've squeezed that wire really tight, which means it
won't move. So there you go, I'll get into trouble for saying that, but that's okay. Next I'm going
to thread some of the beads up over that tail. Now when I've got my beads up here, you can see my tail
disappears. That's what I have now, and if I was to put that bead over it, my tail kind of disappears
in there, but it's not quite. So what I'm going to do is actually chop this little tail, making sure
you chop your tail, not your long piece. I'm going to chop it off a little bit, and then I will be
able to hide it inside this bead here. Because I cut my tail about halfway through that bead,
it will hide inside that one. So that is how to attach a clasp, and that is how to crimp. So that's
what that looks like now. Now we are going to run all our beads up to the other end, and we're going
to do the other end. Now this time I'm going to be adding my extender chain. I'm going to be adding
my little dangle to my extender chain. So let's go ahead and do that first. There's my extender
chain, and this is just a piece of twisted cable chain. Now my little charm actually has its own
jump ring. Now this is a gold piece, but I'm not worried about that, because honestly the amount of
gold that you see when it's on the front, it doesn't matter. I could have replaced it with a silver
jump ring if I wanted to, but I'm not going to worry about that. So I'm taking my pliers, and I'm
finding where the split is in the jump ring, which is right here, and I'm going to hold it on this side,
twist my hand down to open it. I am going to feed on the end of the chain, and I'm going to twist
back to close it. And I'm just double checking from the top that it looks closed, which it does,
and there's my extender chain. Now I'm going to attach it to my soldered jump ring using this
four millimeter jump ring. So same process, opening my jump ring. Now you could use a six
millimeter jump ring for this. If you're a beginner and you're finding these four millimeter
ones hard to work with, a six millimeter jump ring will be fine. Then I'm going to put on this end of
my chain and my soldered jump ring, and then I'm going to close up my jump ring. And I need to
wiggle it backwards and forwards, pushing one plier towards the other, just to get it closed properly.
So there's my extender. It's got this little charm on the bottom. Don't need a charm, you could use
a teardrop dangle, or you don't need to do anything. So that is my extender. So I need to put it onto
the other end of my necklace, and I'm going to do that in the same way. So taking off my bead stopper
and fishing for my crimp tube, then I am going to add my jump ring on there, my six millimeter
jump ring, and then I'm coming back down through the crimp tube like that. I'm just threading my
tail through some of these. Sometimes when your crimp tube is too high, what you need to do is pull
your crimp tube down, and then pull again. If you're having trouble, you can hold this little loop here
with your pliers. Now you don't want to pull it up too tight, because you don't want your necklace
to be stiff, but you don't want any gaps in your beads either. So it's a matter of learning what
works. So you can see there my necklace is still moving quite freely, and I don't have any gaps.
Just lay it down, and we'll double check before we cut off that end. I feel like it needs to come up
a little bit more. I can see I've got a little gap here, so I'm going to pull it back and just give it
a little tug until I get it right. There we go. Now I'm going to take my pliers, and I'm going to
crimp this. Just going to squeeze it flat. I always check my crimp tubes to make sure that
they are holding nicely. Next we're going to cut off our end, and I like to bend my necklace kind
of back on itself. That way you can get in here nice and close, and using these nice fine tip
cutters allows you to get right in there and cut off your wire. And now what happens is this little
bead will slide down a little bit, and it will hide that tail. So there's my necklace with its
extender, and obviously you can use the extender to do up your clasp anywhere along there and make
your necklace longer. Now I will put these on at the end of this video, so I will show you what
it looks like on. In the meantime, if you're interested in making the jewelry that I'm wearing
today, I am wearing some Christmas earrings. These are my Christmas star earrings, and I'm also
wearing my ugly sweater bracelet. I'm also wearing a vintage brooch that was my mum's.
And you'll see in 2026, vintage brooches and vintage anything actually is going to be huge.
So I'll leave you links to those tutorials in the description box below. If you're interested in
making the t-shirt I'm wearing, I will leave you a link to the video on how to make the t-shirt and
how to embellish it as well. That's project number one, and we have already covered a lot of topics.
We have covered design, we have covered stringing, we have covered crimping, adding a clasp, we've
covered using the extender chain, and also opening and closing jump rings. So that's six techniques
we've already done in one project. Now let's move on to our bracelet, and I'm going to show you how
to make loops. The most important thing when you're making loops is to use the right wire.
I have in front of me a roll of 20 gauge half hard wire, or German style wire. Now the reason
it's important to use half hard wire is because it will give you nice consistent loops every single
time. And a lot of people use craft wire, and that's not what you want. You want a good half
hard wire. I'll leave you a link in the description box to a video about materials, and that way you
can get a really good feel for what is what. To make a loop I need a nice flush cut, which means I
need to have cut it with this side of my cutters, not this side, because this side will create a
pointy end. I want a flat end. So taking my cutters, I'm just going to cut off the merest little bit.
It was tiny, in fact that was probably a little too much, and I'm going to put it in my rubbish bin
before it gets on the carpet and gets in anyone's foot. I just want to take a moment to thank the
I really appreciate your ongoing support. If you don't know what the Stylemakers Network is,
it's my private membership group where I share all sorts of other content. We also have monthly
challenges where I can push you to do something that maybe you haven't thought of before.
We also have a discussion board so you can ask your questions and get your
questions answered, and share your work and get inspiration from other people's work as well.
Depending on the tier you choose, you can also attend monthly Zoom calls with me and live streams.
So I'll leave you a link in the description box below to that or scan the QR code on the screen.
Next I'm going to take my pliers and I'm going to make a bend in my wire.
Now I need to make a bend about a centimetre from the end. Now you can measure this if you like,
I kind of know where it is because I've done this for so long. So that's what that looks like.
Then I'm going to take my round nose pliers and I'm going to put them on the end of that wire.
I've got lots and lots of tips and tricks for making the perfect loop in a video, so I'll
leave that one linked below as well. And I am going to kind of tuck my thumb into that corner
there, right in that space there. And when I take the wire in the jaws of my pliers, I want to feel
it to make sure it's not sticking up. Because if this wire is sticking up, you will get a teardrop
shaped loop, not a round one. Okay, now I'm going to press kind of down onto my thumbnail and around,
twist my hand around at the same time, as far as my hand will go. Then I'm going to take my
pliers out and twist my hand back and put the pliers back in. And I'm going to finish twisting
to make the loop. And I want to turn it until the end here meets that bend. And mine isn't quite
there yet, so I'm just going to twist again. And note that I'm kind of holding my thumb in there
to hold that bend in place. And there's my loop. Next I am going to put on some beads. Now I've
already started my bracelet because it would have taken me ages to make this on screen. So this
bracelet, it's made up of one component. Basically it's a loop with a bead cap and it has a bead,
another bead cap and a loop. So that's what we're going to make. We're going to put on our bead cap.
Now you want to make sure that it's facing the bead, so the rounded side goes on facing the loop
like that. And now we're going to put on our bead and our other bead cap facing the other way. So
you always want the rounded side going away, or the dome side going away from your beads,
like that. Isn't that pretty? I love the sparkle of these faceted beads. This is an eight by six
millimeter faceted rondelle. Now what we're going to do is make a bend on the top of our wire. Now
normally I would put my thumbnail on the top of here, but I want this to be really close. So what
I'm going to do is just take my wire and push it over towards me like that. And I want to make sure
that my beads aren't moving around too much on there, which they're not, so that's good. Now I'm
taking my cutters and I am going to cut that wire about a centimeter again from that bend,
using the flush side of my cutters. So make sure whenever you're using your cutters, the part you
want to keep, you're using the flush side next to. Now I'm going to take my round nose pliers
and I'm going to make another loop. And I've got lots of tips and tricks in that other video on
how to get your loops the same size and all sorts of things, how to troubleshoot when they go wrong,
because they invariably do. And the other thing that you need to do is take your loops in your
chain nose pliers, and you can see here mine are facing, one's facing up and down like that, and
one's facing side to side like that. So you take your pliers, hold your loops and twist so that
they are both going the same way like that. So there's my component. Now I'm going to go ahead
and make some more of those. All right, I've got 13 of those components and I think that will be
enough, but I'm going to put them together and then I'm going to test. So to put them together
we need to open our loop. You will see that on one side of the loop we have the side that opens.
For me it's this side here on the side. So what I'm going to do is put my pliers on that side of
the loop and I want to hold it like that, not like this, because if I do that what I run the risk of
doing is bending my loop out of shape. So I want to hold it like that and then what I do is I just
move my hand down. I'm going to show you that from the top as well. I'm just moving my hand like that
and then I'm going to feed on another loop and I'm going to close it up and I close it up by doing
the reverse of what I just did. Just make sure that your bead cap is out of the way. They want
to be little bossy things and get in the loops. So just bringing it down. Now if it's not closed,
what you do is the same thing you do with it as with a jump ring. You lift up again, push down
and across, kind of up and over until you can feel it. You can actually feel them kind of grate
together. So there we go, that's that one and now I'm going to add the next one simply by doing
exactly the same thing. I'm lifting up, putting my loop on and then holding it on the side, making
sure my bead cap's out of the way and going back down. So my bracelet is about a centimeter short
and so I think that's going to be enough by the time I add my clasp to make this work because I
don't want my bracelet to be super tight either and I could actually close those if I wanted to.
So if I added another component it would be too long and I don't like my bracelets to sit down
here. I like them to actually sit at the top of my wrist. So I'm going to go ahead and add my clasp.
I'm going to add my jump ring to my clasp first just like I did before. Now the reason I'm using
a jump ring and not putting it straight into the loop is because it will sit better if I use a
jump ring. If I was to open my loop and put my clasp on it won't sit as nicely. It also adds a
little bit of length. If you wanted more length you could use a six millimeter jump ring which
will add a couple of more millimeters. So I'm going to open my jump ring and put my clasp on and then
I'm going to feed on the end loop of my bracelet and I am going to close up my clasp, sorry my
jump ring. It's not closing so I'm just wiggling up and down and pushing towards my left hand.
I just want to double check that it's closed. That's what that looks like. Now I was going to
use a toggle clasp for this. This is a toggle clasp and it works by this end going through. I
didn't have one the right size because if I'd used this one it would have absolutely overpowered
the bracelet. This is a really fine dainty bracelet and it would have looked silly. So that's something
to think about as well is balancing everything out. Balancing your clasp and your bindings, jump rings
and ear hooks and clasps and all that sort of thing with your piece. So you want to make sure
there's balance. Now I didn't have a small enough one so I'm just going with a lobster clasp. All
right the other end, I am going to add my soldered jump ring. Now a quick word on why I'm using a
soldered jump ring. You don't have to, you can use a standard jump ring. I just find that a soldered
jump ring works better to make everything stay together. Sometimes if you don't quite do your
jump ring up properly it can fall off, so a soldered jump ring shouldn't do that. Of course assuming
that you do up your other jump ring that's attaching it properly. I am going to be using a
four millimeter jump ring for this one as well to attach it. Simply because, same reason, it will
sit better and it will add a little bit of length. So taking my four millimeter jump ring and opening
it and popping on the end of my bracelet and my jump ring and then I'm going to close it. Now this
is a stainless steel jump ring so it's not silver plated. I didn't have a silver plated one but I
think it works okay. It doesn't look hideously out of place. I'm just closing up my jump ring
till I can feel it great together. Double checking, there we go. So that's what that looks like and
let's do it up and I will model this one for you at the end as well. There we go. Remember of course
if you're enjoying this one to hit that subscribe button. I've got my transfer 2026 video coming up
so make sure you subscribe so that you don't miss that one and also if you are subscribed and you
aren't seeing my videos pop up then it might be helpful for you to subscribe to my newsletter.
That way I'll email you every time I release a new one. Okay so that's our bracelet done,
now let's move on to our earrings. By the way that was technique number nine. The last project we're
going to make is a pair of earrings and I've gone back to that Baby Blanket Jesse James box. I've
already made the first earring so here it is. It's so sweet. This one that came in the box as did
this one. This is just a little flower isn't it gorgeous? And this one is a faceted teardrop and
I used a gold ear wire for this one. Now you can make earrings in less than five minutes actually
and I did a whole series way back about earrings that you could make in five minutes or less so
I'll leave you that playlist linked below as well. You can be busy watching my videos,
won't be able to do anything else. The first thing I'm going to do to make my earrings is take a
20 gauge half hard gold wire and I'm going to make a flush cut on the end. I'm putting that
little tail in the bin and now I am going to make a bend about a centimeter from the end
like that. You already know where I'm going with this. I'm going to take my round nose pliers and
make my loop. So I'm tucking my thumb into the corner there, make sure it's not sticking up
and then I'm going to twist my hand around, take my pliers out and twist again. So there is my loop.
Now I'm going to put on a bead just like that and I'm going to make a bend in the wire at the top,
trim my wire to about a centimeter and then make my loop. Now I could have used an eye pin for this
instead of making a loop on each end but personally I never use eye pins because they're just a piece
of wire with a loop on and why would I use them when I can already make my own. And of course I
want to make sure that my loops are both going in the same direction. So there's my component. Now
one thing with the earrings, you'll note that the speed is different on one end than the other so I
want to make sure that the wider end is on the bottom of the earring. So I'm going to take my
earring and I'm going to open this loop here that I just made, the bottom one, and I'm going to put on
my little charm, my little flower and I'm going to close up my loop. So there we go. Now all that's
left to do is the last technique which is adding an ear wire. This is a standard twist ear wire
which means it has this little spring thing here. You can buy all sorts of ear wires in all shapes
and sizes but this is a fairly standard one and this one, the loop at the bottom opens on this
side. So I'm taking my pliers and I'm just holding it on the side and holding the ear wire between my
thumb and my forefinger. So supporting it really well so I don't pull it out of shape and then I'm
going to twist my hand down just like with any other loop and I'm going to feed on my little
component there and I am going to close up my loop just like I did before. A pair of earrings in less
than five minutes. So let me show you all of this jewelry on. Here are my earrings. They are super
pretty. I absolutely love them. I think they're very dainty. I love these little flowers. They are very
cute. I also have on my necklace. It's the perfect length and as I said I can make it longer if I want
to using that extender. So the bracelet worked out to be exactly the right size for me. It is,
you know, when I put my hand down it's not going to fall off. It's not sitting too far down. I don't
think I could have removed one of these. I think it would have been too tight had I removed one. I
ended up using 13 of these components and my wrist measures 16 and a half centimeters just for
reference. Now with my earrings there are several other things I could have done with them so let's
talk about the options for those as well. In this little pack we also had some white flowers so I
could have used a white flower instead of a pink one and that would have looked just as good. I
could also have used these little tassels and that might have looked quite cool as well. Also in this
pack there were some little teardrops and the hole goes through the top of this teardrop so I could
have wire wrapped that but that's a another technique which I didn't want to messy up the
waters or cloud the waters with showing you something else. There were also these little blue
teardrops which you could have put on there as well. You would have needed a head pin for that.
So the Jessie James bead packs come with lots of options and if you're trying to build up your
stash they also have a monthly bead subscription box which is a really great way to get a cohesive
lot of beads and sometimes you don't even need to design them. They just come out perfectly.
I'll leave you a link to a video I did where I used the October one which was the Halloween
themed one and some of those pieces were really really great. I think I made six projects out of
one box. So there you have it, three projects and eight techniques and if you take into consideration
I showed you a couple of variations of those earrings that's five projects. Thank you so
much for watching today, have a wonderful day and I will see you again soon.
