This New Lightweight Body Armor Is a Game Changer! (Special Rifle Threat)

Ballistic Lab
1 follower
1 Video View·Apr 27, 2026
Today we are testing the new SRT (special rifle threat) plate from RMA Armament. The SRT is a lightweight, comfortable level IIIA+ body armor plate that's rated for most common rifle calibers.
What's up guys, welcome back. Today we are testing some very interesting new body armor.
This is the SRT rifle plate from RMA Defense. Now, we have done several videos in the past
with RMA body armor, mainly with their 1165 level 4 plates, and they have always been impressive.
And I think that 1165 is only a couple hundred bucks as well, which is a really good price.
But it's a very durable, very bulletproof level 4 body armor, and I mean, we've shot them things
with 338 Lapuas and freaking elephant guns and everything else. But today we are going to be
testing their newer SRT plate, and this body armor is a little bit different than anything
we've tested in the past, because this one is NIJ certified as level 3A+. So the NIJ
classifications are always changing. They've also kind of started going through a different
testing process, and the SRT that we have here stands for Special Rifle Threat. They also have
one called the XRT, which stands for Extreme Rifle Threat. Hopefully soon we can test that
one as well. So the SRT is what they call level 3A+, because it is more bulletproof than traditional
level 3A handgun armor, but it's not quite up to the standard of real level 3 or level 4 rifle
plates. It will stop ARs and AKs, 6.5 Creedmoor, even .308, just maybe not some of the crazy
calibers that we've seen their other plates stop. However, that being said, one thing I have to
convey to you all about this armor is the weight. Obviously body armor is a constant balancing act
of weight and protection versus comfort, mobility, etc. The SRT is so lightweight you would not even
believe it. They say it weighs two and a half pounds. To me, it literally feels like nothing.
In fact, when they delivered them to my door, I picked up the box and I thought, dang, they only
sent one SRT plate. Then I opened it, and there were in fact two of them inside the box. So this
is by far the lightest rifle armor I've ever held in my life. Now for this video, I want to do more
of a torture test rather than a traditional work our way up through different calibers body armor
test. On their website, RMA says that the SRT plate is rated for M193, which is a very hot 5.56
round. You can see the velocity on the box, 3,180 feet per second. That's a fast moving bullet. It's
also extremely common. I imagine if you're getting shot at with the 5.56, there's a high likelihood
it's M193 because that stuff is everywhere. We're also going to be using my BCM rifle, which does
have a 16 inch barrel. So we should get pretty close to the advertised velocity. Now obviously
with rifle plates, the quickest way through it would be just to stack rounds right on top of
each other, but I don't think that is super realistic. So I'm just going to shoot at the plate
and wherever they go, they go. I'm not trying to spread them out. I'm not trying to stack them on
top of each other, just keeping it realistic. So we'll go ahead and start with five rounds.
Our YouTube compliant mags. I thought that would probably happen. Let's go check it out. One thing
that surprised me right off the bat is I couldn't even see where those bullets were going in at.
Usually with rifle plates, they leave craters in the front and you can easily see where those
bullets are hitting. Not the case with this one. So if we flip it over, we have no exit holes. We
have a little bit of a bulge down here. It actually feels kind of soft, which is weird,
but a little deformation down there and then even less deformation up towards the middle.
Stopped the first three rounds. No problem. Honestly, in real life, I think it's unlikely
that you're going to take more than three to five rounds in the same body armor. I've only heard a
couple stories ever of like military guys taking a bunch of rounds to the same body armor plate.
It's usually one or two, honestly. So three is a good start and it easily stopped them.
Let's keep shooting it. Okay, I got seven in the mag. If we get through these, that'll put us at
ten rounds total into that body armor plate. It'll probably fall over before then, but let's try it.
Okay, that's four.
Five. Okay, I went ahead and put a concrete block in front of the body armor, so hopefully it doesn't
fall over quite as easily. By the way, I also want to shout out Enforce for this light. This is not
a sponsorship. I just really like the light. This is their new ARC 350. They also have a bigger,
brighter version called the 650. If you want a light that's durable and doesn't cost $500,
definitely go check them out. All right, five rounds down. Let's see if we can get to ten.
Damn it. I think that's eight. Okay, I think we got two left. After this,
I'll probably change the setup because I don't think this is working out.
That was nine. This will be number ten.
All right, let's go check it out. Okay, that is ten rounds down. You can see the front of the plate.
I'm surprised by the lack of damage on the front of this thing. I feel like a regular level three
plate would be a lot more opened up after taking ten rifle rounds. We flip it over. We've got some
pretty good deformation right there. That's definitely the biggest bulge. It looks like
it's tearing the fabric where it's up against that cinder block. Those are not exit holes.
We don't even have a bullet to hit over here. It's just where it's resting up against that
sharp concrete. Probably got to change the setup, but you can see, hopefully, the deformation that
we have on the back of that thing. It's probably a little more than you would see on a regular
rifle plate with those 5.56 rounds, but it is easily stopping them so far. Okay, so that's ten
rounds down. This is about where I thought we would start seeing failures. I don't know how
many more it's going to take. Obviously, I'm going to start stacking rounds on top of each other
eventually, and we'll probably have something sneak through, but ten 5.56s, I mean, how many more
are you going to take in a real-life gunfight, honestly? Okay, I brought out Ballistic Bob. I got
ten rounds in the magazine. Let's see if we can get through all of these. Almost.
All right, that's 20 rounds. I'll be shocked if something didn't sneak through. Okay, I have not
looked at the back of this plate. I just picked it up and leaned them up against Bob. That is
20 5.56 rounds. I mean, this thing's just riddled with bullets all over the entire plate, and I
assume in a couple of those, we've probably stacked rounds on top of each other at this point.
We flip it over. No exit holes. That's the same tear in the fabric that was already there from
the concrete, and again, that's not an exit hole. Same with that. That's just where it was leaned up
against the cinder block, and it is deformed like no other, but we have no exit holes.
Down here on the bottom, we did rip the fabric, and yeah, we had a little bullet fragment fall
out the bottom of the plate. I'm seeing shrapnel kind of fly off of this thing, too, as we shoot
it. I assume it's just fabric and internals coming out the bottom, and I mean, you can see how low,
hopefully, those two impacts are. They're less than an inch from the bottom of the plate.
Same with this one over here. It's probably an inch from the side, and it still managed to stop
that one as well, so. Okay, so that's 20 5.56s. I definitely did not think it would stop all of
those. Again, this is just a level 3A+. It's not like a level 3 or a level 4, so I'm expecting it
to fail any minute now, but I guess we'll keep shooting it. Okay, we got five more rounds. I
think it's going to fail any minute now, so I don't want to do 10 or 15 and then not know when
it fails, so. This will put us at 25 rounds. Highly doubt it's going to stop all of these,
but let's see. That's still hanging.
Just hung on by one clamp. Look at how this thing was hanging on when I walked up here.
Literally by like one thread of the fabric, but man, look at that deformation. It is
going through it right now, so that's 25 rounds, and that is not an exit hole. That's just a tear
on the back of the fabric, probably because it's stretching so much that it's eventually
going to tear the fabric. That is also not an exit hole. I can actually feel the bullet in there.
It's hot as hell, and it is right on the edge of coming through that armor. I'm going to get this
in the sun for you guys. I'm sick of fighting it over there. Okay, so hopefully you can see that.
Actually, I can kind of see some of the lead, so I think the bullet is like literally on the surface
of that tear in the back, and then I believe this one is the same over here.
Yeah, also not an exit hole. It's just tearing the fabric, which means it's getting close to
coming through, but not quite yet, so let's see if we can make it to 30. It's so deformed, it's
barely hanging on, so it'll probably fall, but let's see. Pretty sure I saw some shrapnel fly out the back.
I think I shot my clamp at some point because it's bent like crazy, and there's another look. I mean,
we are stacking rounds all over this thing. You can see how close a lot of these are. Like I said,
when you get up to 10, 20, 30 rounds, it's just bound to happen, so go ahead and unclamp it.
Moment of truth. Okay, now I think we have some exit holes. So out of all those rounds,
I believe we had two sneak through. That right there is definitely an exit hole. You can see how
the fabric is being pulled through the bullet hole, and then I assume the same up here. Not
quite as definitive on this one, but we do have some fabric coming out the back, so we'll go ahead
and say it failed at 29 or 30 M193556 rounds. Pretty impressive for a two-pound plate. By the
way, Bob was already riddled with bullet holes all over the front, but I do not think that one
was there. So that looks like a new bullet hole in ballistic Bob. I mean, this guy's like the
Terminator. He's been shot 200 times, and he's still standing strong. I might put this thing up
in the studio as a decoration. That is pretty dang cool. Usually when we shoot rifle plates,
they're so torn up by the end of the video that you can't even recognize them. This one actually
stayed intact pretty dang well. I'll go ahead and say 25 to 27 556 rounds is what we got this
plate to stop. Obviously, we had two failures in those last five. Not exactly sure which ones they
were, but I know number 30 was a failure because it was the one on the right side of the plate,
and I think I watched it blow right through. So man, for a lightweight level 3A plus body armor
plate like this, that is quite a bit better than I thought it would do. I thought after like 10
rounds we were kind of pushing our luck, but obviously it surprised me. All right guys, there
it is. I hope you all enjoyed the RMA SRT body armor test. I'm impressed. Again, this is not
their most bulletproof body armor. I imagine it is probably one of, if not the lightest weight
rifle plate that they have. We've also tested the 1165 level 4s. Those are probably the most
bullet resistant plate that RMA has, at least that I'm aware of. But realistically speaking,
would you need your armor to take more than a handful of rifle rounds? Probably not. So
I would absolutely use these and feel comfortable doing so. They're clearly bulletproof enough,
plus they're lightweight and comfortable, which is like the main reason people refuse to wear
body armor. Hope y'all enjoyed it. If you did, let me know down in the comments below. As always,
hit that like button for me guys. I would really appreciate it. Thank you all for watching,
and I'll see you next time.
