How to Make Jewelry DIY Bracelets Part 3 of 4 Beginners Tutorial

Handmade Jewelry
2 followers
216 Video Views·Apr 26, 2026
I'm going to show you how to make some beaded bracelets.
Now the first bracelet I'm going to, I'm going to show you two different types of bracelets
and the first one I'm going to show you, you may well have done before but if you haven't it's a
really nice simple project that you can do that requires really hardly any materials so there's
no excuses. So it's an elastic bracelet and you can see there's a couple of them over here,
and basically it's just stretchy nylon or elastic cord with some beads threaded on top and you can
see it's nice and stretchy so it can fit pretty much anyone which is a real advantage of these
kind of bracelets because one of the challenges with making bracelets whether you're doing it
for yourself or for somebody else or as part of a jewellery business is that there's lots of
different sizes so one size doesn't fit all but with these it pretty much does or you can kind of
have small, medium and large so that's quite nice. So and here's a nice little golden one,
really really simple as I said. All you need for this project is some stretchy nylon wire,
now it comes in different thicknesses but I always try and use at least one millimetre thick,
you can get half a millimetre thick which is 0.5 millimetres and I'll use that if I've got
really fine beads but one of the limitations of these bracelets is that they can break,
if you pull elastic too hard it breaks so we're going to make them as strong as possible
but these won't last forever but they're great for fashion pieces and for fun pieces to wear.
Another little trick you can do is double up your nylon so you have two strands and thread it all
the way through the beads but a real challenge with these bracelets is you need to find beads
that have nice big holes in, so I've got a selection of beads here that have a nice big hole
in the middle and that's really really important. Semi-precious stones and pearls often have very
small holes whereas glass, plastic or resin beads are more likely to have larger holes,
so make sure when you go bead shopping that you check the hole size especially if you're
going to use it for this project. So we also have a pair of scissors which everyone has
and a bunch of different beads with large holes on. Obviously we only need the nylon to fit around
your wrist so check the size of your wrist but then I always add at least double on because we
want lots of room to work and it's not an expensive material so it's always better to have too much
than too little. So I've just cut a nice long length to work with and I'm going to thread on
my beads and again I often lay out my design on my mat first so I think I'm going to have
a sort of alternating design with these lovely round beads that I've got and then I've got some
nice little metal spacer beads that I can sprinkle in between and what's really nice with the beading
mat is you can lay out your designs beforehand and get an idea. This is a very simple design but if
you had a more complex one you might want to have a play around with it, see what it looks like,
decide whether it's the right design for you before you thread them all on and then decide
to change it. So I'm just gonna keep going threading on all my beads and when you're selecting beads
you can have a think about you know what's important to you. Are you going to be wearing
this with a particular outfit? Do you want to make a collection so that it will match earrings,
necklaces, bracelets? Do you like very delicate jewellery or do you like quite big chunky pieces?
And also the weight of the beads because plastic or resin beads are often very nice and light,
glass is usually a little bit heavier and then semi-precious beads such as amethyst, turquoise
or coral is normally a little bit heavier. If you're using heavier materials you want to use
a stronger wire or base to put it on. So these are all just considerations that you can think about
but again with making jewellery experimenting is the key. So try out different things, don't worry
if the first pieces that you make aren't perfect or they break. The first pieces I made definitely
broke but each piece that breaks you learn from it and you think well why did that break? Maybe
the stringing material wasn't strong enough and then next time you'll be sure to use a stronger
one. So obviously you want to get all those things out the way before you start selling your work
because if you do decide to set up a jewellery business
then obviously you don't want your pieces to break but the more you do,
the more experience you get, the more professional your pieces will become.
Great so I'm nearly there threading them all on. As you go along you can kind of take a look
at how big it is so I know that's not going to be big enough for my wrist yet so I'm going to keep
going and what's coming next is basically we're just going to tie a really strong knot at the
end to bring it all together. What's nice about these bracelets that I'm showing you is as they
fit any size they don't need a clasp. In the next video I'm going to show you how to attach a clasp
which you're going to use for your necklaces but that does make these bracelets very simple
and easy to do. So now I've got enough beads to make it around I'm going to hold it nice and tight
thread it onto my wrist and just check the size, check that it's going to fit and that there aren't
any big gaps at this stage because once you've tied it up it's going to be difficult to
adjust you're going to have to start again. Great and I can take it off and basically the
simplest way is to tie four knots on top of each other and each knot you get a bit more brave and
do it a bit tighter. So the first knot I'm just going to show you is going to be quite loose
because if I pull it too tight it will just cross over all my beads. Then the second knot I want to
pull a little bit tighter and don't be worried if your piece snaps at this point
yeah because you do want to push the elastic you want to try and make it so it doesn't snap
but it's better that it snaps now and you do it again then it that it snaps when you're wearing
it. I'm going to go for my third knot so pull it even tighter and at this stage I can check
that it's nice and tight it's not going to come off.
Great and then I'm going to do a final fourth knot and pull this one super super tight
and hope it doesn't like I said if it if it doesn't snap now then it won't.
Great and then I can try it on and it's all fitting and it's not going to snap which is
perfect and I'm confident that it's very strong now. So what I'm not going to show you but you
can do is put a tiny blob of super glue or really strong glue onto that leave it for however long
the glue takes to dry so it might be a couple of hours or up to 24 hours. I don't always put
glue on my knots you don't have to but it can help for peace of mind and then I'm going to cut
with my scissors nice and close to the knot cut off my excess nylon wire
being careful not to cut the actual knot. And there you have your finished nylon bracelet.
Now there's one thing that you can do with the knot which is difficult to do with this one
but if you've got beads with large holes you can sometimes tuck the knot inside a bead
but to be honest it's okay it's very subtle it's very small and everyone knows with nylon bracelets
there's going to be a knot somewhere so it's not unprofessional to have a tiny knot next to a bead
but again try out different designs try out different styles you can stack them on your
wrist and they're an extremely flexible bracelet that are cheap and easy to make. Now that you know
how to make a stretchy nylon bracelet we're going to try another bracelet that's a little bit
different this time we're going to make a memory wire bracelet like this one I have here and memory
wire is a really interesting material because like the name suggests it kind of has a memory
so however you twist it and pull it always springs back into shape and like the nylon bracelet it's
one size fits all and you can just pop it on and what's really nice with the memory wire bracelet
as well is this is kind of like a one and a half bracelet but you can keep going if you want so
sometimes I do big massive chunky ones that go all the way up so it depends how big and bold you
want your jewelry to be they're really good for selling because their materials are not very
expensive and again the whole one size fits all is really suited to that but also great for presents
so to start off with you're going to need your round nose pliers and your side cutters which
we're getting really used to using by now a selection of beads that you want to put on your
memory wire and memory wire bracelets do take up quite a lot of beads depending on how big they are
so make sure you've got plenty and you don't run out halfway through and memory wire comes
in a coil a bit like this so it's a nice long coil and I've got a gold plated one here but
you can get silver plated and different materials so it's entirely up to you and you may think it
looks a little bit small but don't worry because they do stretch out as you go along and you can
sort of adjust them a bit as well so I'm gonna first of all cut my memory wire now memory wire
can be a bit tricky to cut and you can get specialized cutters called memory wire cutters
but to save on tools I'm going to show you how to cut just with your side cutters although it's a
good for your side cutters to always use them on memory wire because it does damage them over
a long term so if you're going to use a lot of memory wire I'd recommend getting some memory wire
cutters but it's a very similar process so I'm going to do about a loop and a half because I'm
just going to make quite a small memory wire bracelet but as I said you could do as many loops
as you want but I've chosen where I want to cut it I'm just going to get my side cutters put it over
and cut now memory wire is a little bit tougher than the gold or silver plated wire that we've
been working with on our head pins so don't be afraid to give it some elbow grease all we need
to do to stop our beads from falling off is put a loop at one end and again making a loop is exactly
the same as we've done in the previous videos you take the end of the wire pop it into your
round nose pliers like that about centimeter down from the top make sure there's nothing sticking
out the end and push with your thumb all the way around and then squeeze the last bit to close
now again memory wire is a little bit harder to work with because it's a bit of a tougher wire
so the loops are difficult more difficult to make um but just keep practicing and you'll get there
um so great so now I've got my whole memory wire with um one end that's unlooped and one end that's
looped and that's going to stop my beads from falling off so I can start threading my beads on
you can choose a specific design for your beads which is quite nice you know to follow a pattern
but sometimes I like just to be really random and just choose a selection of different beads
or different colors and just sort of throw them on and see what happens and sometimes that can
be really nice as long as you have like a theme like a color scheme or something that um something
that holds the whole piece together so once you've got your beads on you just push them all the way
around to the bottom and you can see where the loop is that it stops them from falling off the
so all I'm going to do now is keep going with my beads and fill it all the way until I get to about
just over a centimeter away from the end because that's how much space I need to leave
to make the same loop that I made at the beginning at the end of the bracelet so I'm
just going to thread all my beads on now and then I'll show you how to do the loop at the end
so once you've threaded on all of your beads and you've got to the end of your memory wire
and you just have you should have a little bit more than a centimeter left so we can make our
loop and we're literally just going to do the exact same loop as we did at the very beginning
so take your round nose pliers and you guys are pros at making loops now because we've made
so many and you're just going to thread the end of the memory wire into the loop
wrap it all the way around until it's nice and secure and that is literally it
that's how you make a memory wire bracelet so it's really a nice simple one um the really
important thing with um your loops at the end is to make sure that there aren't any sharp bits of
wire sticking out because obviously when you're wearing it you don't want anything that's
uncomfortable or scratchy and obviously you always have to try it on at the end which is my
favorite bit um if by any chance the memory wire that you have feels a little bit loose
you can always tighten it a little bit by just kind of pulling it around and just conditioning
the wire in that way it's a little bit malleable and the same if it's a bit tight you can just
sort of stretch it out a bit so there is some flexibility there that comes to the end of the
bracelet part of the videos um i think both of the bracelets that we made both the nylon and
the memory wire are really nice beginners projects to have a go with so have a have an experiment
try out different designs different colors different styles and i'll see you in the next
chapter for necklace making
