Want to bring new life to an old desk? In this step-by-step DIY furniture restoration tutorial, I’ll show you how to strip, sand, and refinish a vintage wooden desk, restoring its original beauty while adding a classic Art Deco design with stain, paint and stencils. This was part of an Art Deco 2-week furniture flipping challenge hosted on Instagram by @ivylane-home
✨ What You’ll Learn: ✅ Safe and effective wood stripping methods ✅ How to sand & prep vintage wood ✅ How to use paint and design elements to hide flaws ✅ Budget-friendly techniques for a beautiful furniture makeover
🔔 Subscribe for more DIY furniture makeovers! Don’t forget to like, comment, and share if you love vintage furniture and furniture flipping videos.
Materials: GreenEZ Strip & Clean Melange Paint: Jacobs Well Green Sanding Block and Sand Paper in 80, 120, 220, and 400 grit Klean Strip Acetone Minwax Wood Filler Dixie Belle Voodoo Gel Stain in Tobacco Road Minwax Wipe-On Polyurethane in Warm Satin Gloves, Mask, and Protective Eyewear Carbide Scraper Goo-Ki Solid Zinc Brushed Brass Cabinet Knobs- Amazon ChiHut Green and Gold Wallpaper – Amazon
DIY, Art Deco, vintage desk restoration, furniture makeover, woodworking, upcycling, refinish tutorial, home decor, furniture restoration, step-by-step DIY, how to flip furniture, how to strip paint from wood, desk makeover
This video is for entertainment and instructional purposes- but use products and techniques at your own risk with proper safety equipment. Always read directions before using any wood working materials. Good luck with your projects!!
I swore I wouldn't do it, but I did it again. I bought another piece of painted furniture.
This macaroni and cheese, or maybe it's mayo and mustard colored desk, was perfect for an
Instagram challenge with an art deco theme. You won't believe what this looks like after I'm done
with it, so keep watching. I took a chance with this hoping that I would find beautiful wood
underneath all of this paint. First things first, we had to see what was underneath it.
For this project I'm using a new stripper. This is Green Ease. I've never used it before,
but I've heard great things about it, and most of all I like it because it's more environmentally
friendly than many of the other strippers, and it is soy based. So I spread a nice thick layer
of the Green Ease. It's kind of like a gel across the top of the desk, and then because it's a warm
spring day, I went ahead and covered it with some plastic so that it wouldn't dry too fast,
and then left it to sit for about an hour. When I came back to check on it, I could tell that the
stripper was working its magic. You can see where the paint is bubbling up and the texture is
changing. I grabbed some gloves and a paint scraping tool and tested it out. I am also using
a cardboard box to catch the paint as I strip it from the furniture. Look at this. I am extremely
happy with this. I'm not having to apply too much pressure, and a lot of it is coming off super easy,
and more importantly, I am finding some really beautiful veneer underneath it.
It looks like the person who painted this did not sand down the top coat that was protecting
the veneer, so the paint is coming off, but the top coat and the stain on the veneer is not,
which is actually a really good thing because that has probably protected it for many years.
So I'm just going to keep my fingers crossed that I continue to find this gorgeous veneer.
This product is fantastic. I left it on maybe an hour, maybe a little bit less, and I have never
had paint come off this easy before. Most of the paint was coming off really easily from the top
of the desk. I would have to work a little bit on the curved part and the front face of it.
Using a cardboard box to catch the drippings was super easy, and then what I do is I just
leave that box in the sun until it dries up, and then it's safe to throw away.
I decided not to apply another layer of the paint stripper, but instead I grabbed one of my tools.
This is a five-in-one painter's tool, and I'm just kind of gently trying to lift some of that paint
off of the dresser, hoping that maybe the stripper did its work, but it just wasn't quite done.
I don't want to get too aggressive with it because I definitely don't want to scratch the finish,
but as you can see, this is helping get some of that extra paint off before I come back in
with some paint remover or acetone to get that last layer of paint. After I had scraped off
as much as I could, I then went ahead and got some acetone, and first attempt, I'm just going
over it with a little scrub brush to kind of loosen the larger chunks of paint, get any of the
stripping residue off of the piece of furniture, and remove the paint from the wood grain.
This is a technique that I have found works really well when using acetone, is to lay down
paper towels and pour the acetone over it. This prevents the product from running off of the
furniture, and it also prevents it from evaporating really quickly and gives it some time to soak
into the wood. Once it has soaked in, then typically you can just lift up the paper towel
and start scraping away. Here we go, and this will also start to remove some of that finish that was
underneath the paint so that I can get down to the natural wood veneer. I went ahead and grabbed my
carbide scraper because I want to be really careful not to damage the veneer, but I do want to get as
much of this paint off of it as I possibly can. And now after the acetone has worked its magic,
I'm able to use the carbide scraper to get that last bit of paint and also start removing that
old top coat. I keep plenty of paper towels handy to wipe it away as I go. This is a really
tedious, time-consuming way to do this, but because of the age of the stressor, the curved top,
and the thinness of the veneer, I really want to sand as little as possible and try to remove
as much of the old finish by hand as I can. This is just one way to preserve that gorgeous
curved waterfall front. Then I'm just going to keep moving down the desk doing the same thing,
saturating paper towels with acetone, letting it soften up the finish in the paint, and then
removing it with my carbide scraper. This desk had some little trim that had been added to the front
of it, and it was broken in a couple places, so I'm going to go ahead and remove that. It's just
held in place with some little tiny nails, so my painter's tool took it off pretty easily,
and then that allows me to get in underneath there, clean it up, remove that extra paint,
and then I'm going to have to find some type of trim to add back onto it once I am done cleaning
it up. But so far it's looking really good, and the entire waterfall front was in great shape.
For the sides, instead of using a chemical stripper, what I'm doing is I'm just going to
use my carbide scraper. I have found that typically the sides of furniture do not have as much
top coat, varnish, lacquer, whatever is on it as the top does, and they're also usually dryer
because they don't get as much furniture polish, they don't get as much oil from hands,
so that the paint will actually be dry and come off really easy with just a carbide scraper.
So here you go, you can see we're scraping. I am wearing a mask because this does produce dust,
even though I'm not sanding, and yes, I did do a lead test before I started working on the piece
of furniture to make sure that there's no lead-based paint or other materials that I need
to worry about. Well, it feels like hours later, I finally have the top and the two sides stripped.
You can see that they're not in the best condition. I am going to have to do a little bit
of sanding to get the remaining top coat off of it, get down to the natural wood.
For the top of the desk, I'm using my hand sanding pad here. I am using a 120 grit sandpaper.
I usually start with an 80 grit, but to protect this wood veneer and especially the curved part,
I don't want to use something that's that coarse, so I started with a 120. After I'm done with the
120, then I will go over it with a 220 and then a 400 to get it nice and smooth. You do have to be
kind of careful going over the edge here because you want to get the old finish off, but you want
to make sure that you're preserving that veneer and not rubbing it thin, especially on the waterfall
front. I had my air blower handy, so I went ahead and used it to clean off the dust, and then I
wiped it down, and now what I'm going to do is go in with more acetone and steel wool. I'm using
000 steel wool so it won't scratch or damage the wood, but it will get in there and it'll get
any of those last remnants of paint, especially any that are caught in the wood grain out of
it. It's also just one last thorough cleaning to make sure that I've got all of the wood stripping
residue off of it, and you can see as I'm adding the acetone, the natural color of this veneer is
just so pretty. I can't wait to see what it looks like once I add a little bit of wood oil and some
polyurethane to it. I just love the details on the front of this desk, especially down here at the
base, so what I'm going to do is I'm using the acetone and I'm pouring it in there, letting it
sit for a moment, and then I'm going to come over first of all with this brush to just kind of get
as much as I can out of each of those little crevices and all of the cracks, and then I'm
probably going to have to come back in with a smaller brush and really try to work each area
to remove that. I don't want to risk using a detail sander, I don't want to risk damaging the
wood, especially where it has some really cool veneer and a beautiful pattern, and I also just
didn't feel like using the chemical stripper, so I'm doing this all by hand. I've already been
working on this project for about four hours today, and I want to try to get everything stripped as
much as I can on day one of working on this project. In addition to working on furniture, I do
have a full-time job. I work in higher education and I help support students through their educational
journey. I'm very fortunate that I have a very flexible job and I work remotely a lot of the time
from home, so that enables me to work on my projects a little bit in the morning before work, and
sometimes I can come outside and get some things done during my lunch hour as well.
So now you can see I've gotten the majority of it removed, but I'm using a toothbrush here to get
into the corners and all of the crevices. This, like I said, this is tedious work, but I'm really
hoping that the end results will be 100% worth it. I also have this little pick that I grabbed at
the craft store that I can use to get in there and kind of scrape any of the stubborn finishes
off. I really, I feel like I'm a, what is it? Not a periodontist, a dental hygienist. I feel like
I'm a dental hygienist today working on this with my toothbrushes and then my pick, but it's actually
coming off pretty well, and the wood underneath is really beautiful, so I'm excited. I think I'm
going to be able to salvage a lot of the natural wood on this piece. I was really hoping that I
wasn't going to just remove paint to then have to add paint, but it looks like a lot of this is in
really good shape. I decided that it would be fun to do a time-lapse video when I put the stripper
on the drawers, so I used the same process. I spread a thick layer of the stripper, covered it with
plastic, and you can actually see it working in this video. It is just so cool, and then look how
easy it removes. After I did the first coat, I went in and I dabbed a little bit onto any of the
stubborn spots, let it sit, and came back and they just wiped right off, and then I followed the same
process that I did with the top of the dresser, going over each of the drawers with some acetone
to remove any of the remaining paint or wood stripper. Once again, using the paper towel
method of putting the paper towel down first, pouring the acetone over the paper towel, and then
letting it sit for a moment or two until it has worked its magic and it's ready to be wiped off.
Acetone, it is a chemical and it can be very drying on your skin, so you'll notice that I
tend to wear gloves whenever I'm going to be touching the product or anything that has the
product on it, and even though you can't see my face, I am wearing a mask and working outside so
that I'm not breathing in the chemical smells. Please make sure that you're always using
protective equipment and taking care of yourself when you're working on your furniture projects.
I'm using my carbide scraper to remove the finish from the fronts of the drawers,
and this is working really well with the combination of the acetone and the carbide
scraper. There you can see on the long drawer how it's removing that old top coat, so that will give
me a fresh new wood finish that I can work with. And finally at the end of day one, I just wanted
to show you again what it looked like when we started, and here's what it looks like now.
The top is in really good shape except for some damage along the back edge, and I think what I
can do is add some decorative trim to cover that up. The sides look pretty good, there's some
missing veneer and some damage along the bottom, so I might be able to do either some trim or a
paint design. The drawers are going to need some work, especially that drawer there on the left,
there's a lot of damage, but I am thinking that I will be able to use a combination of wood filler
and paint. Here on the top I've stood it up now, and what I'm going to do is I'm going to start
going in where there's missing veneer and putting a wood filler to fill that in. This is an easy to
use product, you can get them in different colors, this just happens to be the color that I have,
so I'm going to go ahead and use it, and it's not going to match exactly, but I do have some
wood paints that I can then use to blend and do a color match, or I'm thinking I'm probably going
to end up adding a piece of wood trim to the back edge of the top of this desk because there is so
much damage on this piece. Some of the veneer was also lifting away on the sides, so what I did is
I applied wood glue between the veneer and the desk, and then I used weights of clamps to hold
it in place. Now I'm going to pay some attention to the fronts of these drawers. I do have my
sanding pad here, so first things first is I'm just going to go and I'm going to sand each of
the drawers to remove any of the old varnish that was on them. I want to get them down to
the natural wood, and then I'll be able to get an idea of how much repair I'm going to have to do,
and whether or not I can salvage them, or if I'm going to need to come up with some type of a maybe
a paint and stain combo. I'm being really gentle with these because I do love this wood pattern
and the design, and I am really hoping that I will be able to salvage and fix these drawers.
After I sanded down the drawers, I did a little trick that I like to do, and I grabbed some brown
paper bag. I put it on my sanding block, and I'm going over the surface of each drawer.
This brown paper bag, it's the equivalent of a really super high grit sandpaper, and it's just
very gentle, but it gets rid of any final imperfections, any little bits of leftover
varnish or top coat, and gives it a really super smooth finish. I do think I'm going to be able to
save the natural wood, so what I'm going to go ahead and do is I'm going to use some of this
quick wood to fill in the old drawer pulls. The pulls that were on this desk were not original
to it. They had been added at a later date, probably when the new paint was added to it.
Quick wood, this is an epoxy product, so what you do is you cut off the amount that you think
that you're going to need, and then you blend it together. You kind of rub it like you would clay
or play-doh until the two colors have blended into one. So you'll notice I am wearing a glove
to protect my skin, and sometimes if you're doing a larger amount, it helps to kind of break it into
smaller bits. And then I like to also use cardboard to rub it on. And for drawer pulls,
what I have found to be really helpful is once I get it blended, I will roll it on the cardboard
and make it into these thin little rolls that then you can just slide right into that existing
drawer hole and then smooth it until you get the hole filled. You want to overlap the top just a
little bit because you're going to come back when you're done and sand it smooth to get it flush to
the wood. I'll then repeat this same process with all four drawers, working pretty quickly because
I want to make sure I get this product in place before it starts to dry, and then I'll let it dry
at least overnight before I come back in and sand it or do anything else to it. The next day you can
see that the quick wood has dried. It's nice and hard and it is sandable. So now I'm coming in with
my small little sanding pad and trying to remove anywhere that I added the quick wood that it
wasn't flush with the wood just by gently sanding it and going over the direction of the wood
in the same direction the wood grain goes. So you can see that I am doing a diagonal sand on the
center of these drawers where it has the wood grain going in that diagonal direction, but then I'm turning
the drawer whenever I do the opposite side or whenever I do the tops or the bottoms. You always
want to sand in the direction of the wood grain so that way if you get any scratches, you apply
too much pressure, you won't really be able to tell because it'll just blend with the natural wood grain.
Once I got it sanded down and it felt pretty flush with the face of the drawer, then I just
grabbed some water that was handy on a piece of paper towel and wiped it down. And look at that,
you can see just with water how gorgeous this is going to be once these drawers are done.
After a couple days of filling in missing veneer with quick wood or adding in wood filler,
doing a lot of sanding, I'm ready to kind of start working on the design of the piece.
I found this really cool piece of wood trim at my local Home Depot and I love the repeating
pattern of the squares. I think it is perfect for an art deco inspired piece and I have decided that
I am going to use this dark emerald green. The color is called Jacob's Well and it is by Melange
Paints. This is an all-in-one paint so it has a primer and a top coat in it. Look how pretty that
is going to be. I'm probably going to have to put several different coats on it because it is very
raw wood. I'm also going to paint the trim on the top and sides of the desk. It extends down the
curving and then it's on the inside here. It's not really pretty wood and I think it's going to
actually accentuate the piece more by painting this little bit of trim in this gorgeous dark
green but I am keeping the majority of this piece natural wood. I really think it's fun
when you can kind of play around with color and you can see that the dark green goes really well
with the reddish natural wood tone. I also painted the wood trim underneath the middle drawer and
then I'm repeating the process of painting the trim on the opposite side of the dresser. I'm
using a small little paintbrush by Zebra and this brush gives me enough control that you'll notice
that I have not taped off the edges because I'm pretty confident that if I am just careful
and use long slow strokes that I don't need to take the time to paint. This is just kind of fun
to watch it fill in and if I do get a little bit of paint on the inside or anywhere that I don't
want it to I can just come right in and wipe it off immediately or come back in once it's dried
with a little bit of gentle sandpaper and brush it off. Not only is painter's tape expensive but I
also feel guilty when I use a lot of painter's tape because you can really only use it once and
get it to really stick well and I feel that I owe it to our environment to be as environmentally
friendly and as cost-conscious as I can. So here I am now just doing this outside curved piece of
trim once again using the same paintbrush and just being very careful to only get the paint where I
want it. It took three coats of paint to get the trim to be the nice dark color that I wanted.
It was a very dry piece of wood and I did gently sand it in between each coat of paint to make
sure that it was nice and smooth. It would have been quicker and easier to spray these but I do
find that I feel like it wastes a lot of paint when you're spraying something small like this
because of the overspray and there is something really satisfying about watching the paint go on
by hand with a brush. After the sides of the desk had been cleaned and gently sanded I found
that they were a little bit splotchy so what I decided to do was apply a thin layer of this gel
stain. This is a gel stain by Dixie Bell Paints. This color is called Tobacco Road and what this
is going to do is it's going to help even out the wood and it's also going to just gently kind of
tone down the reds and the oranges on the side of the piece of the furniture. So I'm just applying
a nice thin layer using this little kitchen sponge that I picked up at the Dollar Tree
and once I get it all over then I'm coming back in with the towel to wipe off the excess because
I don't really want to change the color drastically I just kind of want to even out the splotchiness.
Now that my wood trim is painted and dry I'm going to go ahead and put this in place. I'm
nailing it across the front using some little nails. I'm going to use about six of them. I'll
start in the center to make sure that I've got it nice and lined up with the bottom of the top
of the dresser there kind of just putting it in under the edge and then I'll come back in and dab
a bit of paint on the nail if it shows and then I'll go ahead and add more nails across the front
of it. I didn't feel like I needed to necessarily glue this down because it is a nice sturdy piece
of wood and by applying the nails about every four inches it's not going to move it's going to stay
in place. Oh my gosh I absolutely love the way this wood trim looks and I think the design on
it is perfect for art deco and so this is how the back piece is going to look. It's going to do two
things it's going to add to the design but it's also going to cover up those areas that I had to
use wood filler to fix the veneer damage. Once all of the drawers were cleaned up and any damage had
been repaired what I decided to do is just use a wipe on polyurethane to bring out the shine and
to protect the wood. This is a warm satin finish. I rub it on with in this case I'm using the sponge
to rub it on let it sit overnight come in and gently sand it and then repeat that process three
times. While I spent a lot of time repairing the veneer on the drawers I decided to use paint
to hide some of the veneer damage on the inside of the desk. So what I'm going to do is I am going to
do a kind of a triangle design on the inside of each leg slanting in bringing the paint down
to cover all of the veneer damage on the bottom of it. So first things first we've got to get our
tape lined up I am just going from corner to corner to get it nice and straight and even
and then I will mirror that on the other side. Now sometimes I'll go over the edge of my tape
with a little bit of polyurethane or shellac or something to seal it but I feel like this
went on pretty smoothly and because I'm only doing the paint in one direction I think I can
paint it on without getting any bleed underneath the tape. I might regret this but that's the
approach that I took at this time and you can see it took me like four or five tries to get it
in there perfectly straight so you know don't don't be fooled by the videos that make it look
super easy because it is a lot of work to do this type of design. Adding a little tape
tape down there in the bottom where I cut it a little bit too short. I'm going to apply the
paint using a brush and what I'm going to do is I'm going to paint down and away from the tape.
This way when I use the brush on the area where the tape and the wood meet I will be brushing
down and won't be forcing any of the paint up into and underneath the tape. At least that's
my plan. So I'm just going to keep doing those long strokes brushing down starting at the taped
edge and then going all the way down to the bottom. I applied three coats of paint letting
it dry thoroughly between each coat and now for the tape pull. Here we go! Yes, no bleed. So that
technique of painting down and away from the tape seemed to work pretty well for me. I'm going to
mirror that same angle on the outside of the dresser or I'm sorry the desk. So instead of
taking the tape from corner to corner what I did is I measured the triangle that I painted on the
inside to see how high it came up and then I brought my tape to mirror that same size. A lot
of art deco is about repeating patterns so I want that same pattern to be repeated on all four
sides both the outside and the inside of this desk. And then I'm going to use the same technique
that I used on the inside. I applied my tape pushed it down nice and firm and then I'm going
to take my brush strokes starting just over the edge of the tape and then bring them down the
side of the dresser making sure not to push any paint up and under that tape. Moment of truth when
we go in for the tape pull you can see how the pattern is replicated from the inside to the
outside with the same angle and here we go and yes it's pulling off nice and even and giving me a
super crisp straight line. This tape is working wonderfully. It's always a reason to celebrate
when you get a nice smooth straight paint line. Now I'm going to add a design element. I found
this stencil it's kind of a palm leaf is what it reminds me of and repeating patterns are very
common with art deco furniture as well as the use of gold. So I am using a gold paint to stencil
this leaf pattern onto the sides. My plan is to use gold paint where I have the green base coat
and then use green paint where it's the natural wood for kind of a flipped look. So I'm hoping
that'll look good but there's only one way to tell and that's by putting it on there.
Here's where I switch to the green paint that will be on the natural wood. Some of these will
have a split design part gold part green but I'm thinking it's gonna look pretty cool. Fingers
crossed. Now's the scary part when I gently lift away the stencil and so far so good. I didn't get
any smearing. It doesn't look like there was any bleeding underneath it. I'm kind of liking the
transition between the gold and the green so I'm going to let this part of the stencil dry overnight
and then in the morning I'll come in and do the next part of it. So the next day when the paint
is nice and dry, the stencil is dry, I have applied it, taped it down, and I'm getting ready to go in
with my paint to continue the pattern. At this point I wasn't sure if I was going to do kind
of a triangle shape or if I was going to do it angled up the side of the dresser to mirror the
paint line. Right here is where things went awry. If you'll notice I picked up the gold paint to
continue extending the pattern of the gold leaf and I should have been using the green because I'm
doing it on the natural wood. So somehow in my mind I got my pattern reversed and screwed up
and grabbed the gold instead of the green. Now the day that I was doing this I didn't even notice that
I had gotten the pattern wrong at this point. I just kept going. I would let it dry, put the stencil
back in place, picked up the gold paint again, and kept going. It wasn't until later in the day
that I realized that I had made a mistake and at that point I either had to remove it all and start
over or go with it. And you know what? I decided sometimes mistakes happen for a reason so I decided
to go with it and keep using the gold and just have that one little area be green. I think it
might actually provide a really cool contrast when I'm done. You'll have to let me know in the
comment sections what you think. Do that final stencil lift and here we go. I'm a little bit
nervous about this. I think some people are going to like it. I think some people are going to hate it
and honestly I'm still kind of 50-50 but like I said earlier I think sometimes mistakes happen
for a reason so I'm going to go with it. Now it's time to put the new hardware on. I have this cool
little tool that I use that I can align these different rulers to find the exact middle of the
drawer and the height where I want to apply the hardware based on the hole. I'm using these cute
little triangle drawer pulls that I think really fit with the Art Deco theme. The great thing about
this tool is once I have it measured and in place for one drawer then I can just lift it, put it on
the next drawer and it's set and ready to go. It has a little hole punch here that you punch down
and you've got your starting hole for your drill. Then I can just grab my drill and drill the hole
and add the hardware. I always keep a supply of little washers on hand because sometimes depending
on the width of the wood the screws might be a little bit too big or too small and in this
situation I did have to add some washers to the back of the screws to get them to fit in nice and
tightly. Finishing touches for this piece is I ordered this really cool diamond patterned green
Art Deco peel and stick wallpaper off of Amazon. This is the brand and it even came with this
adorable little sticker. I don't know what I'm going to do with it but I'm sure I'll find something.
So after I measured my drawer then I cut the paper but I first looked at the pattern because
I wanted the diamonds to be centered on the drawer so I got it in place where it would be centered
and then I went through the process of cutting, peeling, and sticking and putting it in place.
I always start from the edge closest to the front of the drawer because that's where
any little minor errors are going to be the least visible and then once I have the paper straight
and in place what I do is I will then remove the rest of the backing and smooth from the middle of
the paper out towards the edges. This is really great paper, it's very sticky, it's a nice
weight. I really am quite impressed with it. So right there you go from the middle out to the
edges and then just use a little craft knife to remove any of the excess. This pattern is so
pretty I just love it. Of course adding decorative wallpaper to the drawers isn't necessary if the
drawers are in good shape but for this competition I really wanted it to have that extra wow factor.
And then finally I'm going to go in and I'm going to treat the wood on the outsides and bottoms of
all of the drawers. I love this product, you'll find the link for it in the description. Not only
does it bring the wood back to life and moisturize it but it has a really nice kind of citrusy smell
and that's just the type of thing that's going to make sure that the drawers slide smoothly
and that they look really beautiful when your customer is checking it out deciding whether or
not they want to buy it. Let's take a quick look back at where we started with this kind of low-key
cool vintage retro look and here's what it looks like now. Amazing. I am so happy that this
beautiful piece of furniture was underneath all of that mac and cheese, mayo, mustard, whatever color
you want to call it. Look at that veneer and the detail work on those drawers. It's absolutely
beautiful. I love restoring furniture. There's the stencil. Like I said I left the pattern as it was.
I think it turned out kind of cool and I actually really like it now. And then that pop of color
when you open up the drawer for a fun surprise. You can see how the wood trim hid all of the flaws.
And you know this isn't a makeover that's going to make me a lot of money but sometimes it's about
the artistry and learning new things and doing something fun. So I would love for you to follow
me on my furniture makeover journey. My name is Carmen. Please like and subscribe and I look
forward to getting to know you.