On this episode of DTB’s “Gear Masters”, Leah Levinson, bassist/vocalist of the black metal band, Agriculture, shows off the gear that she uses onstage, while on tour with Knoll. Agriculture is currently supporting their newest album, The Spiritual Sound.
ABOUT DIGITAL TOUR BUS: Digital Tour Bus is your backstage pass to your favorite touring artists! With daily video releases, we cover all genres, and have had the pleasure of featuring the likes of Matchbox Twenty, Twenty One Pilots, Megadeth, MGK, Papa Roach, AJR, Pierce The Veil, Simple Plan, A Day to Remember, and thousands of others over the past 15 years. "Bus Invaders" takes you inside an artist's home on the road, "Cooking at 65mph" showcases the culinary skills of artists on tour, "Gear Masters" unveils the equipment musicians use on stage, and "Stage Threads" dives into the meaning and inspiration behind the clothing artists wear during their performances.
Affiliate Disclosure: Some of the links in this description are affiliate links, which means I may earn a small commission at no additional cost to you if you make a purchase. Your support helps me continue to create content like this. Thank you!
The active EQ on this is so insanely powerful. It becomes like a little bit incomprehensible where
the actual note is sitting. It's actually like so powerful and light that I usually just keep
it on the floor. Hey what's up this is Leah Levinson from Agriculture, a bassist and vocalist,
and I'm gonna show you what I play on the road. We're on tour through the Midwest and East Coast
right now promoting our record The Spiritual Sound. We're out on the road with Knoll and
yeah this is what I play when we're on our tour. I've been playing a Music Man Stingray as of last
year from Ernie Ball. I really love this bass. I used to play a Ibanez Soundgear 5-string which
was my bass for a long time. Super clean studio sound but I tried this one out and I really fell
in love with it. And the thing that makes the difference about this Stingray is it has the
dual humbuckers and that's been really important for me because I tend to like a
a little bit of a rounder sound that I can get from the neck pickup. And it has five switch
positions to go between these two pickups. So there's the center which uses both and that's
what I'm on most of the time and it gives me a little bit of that like classic Stingray sound
that's kind of the chimey attack when I play with my pick. But I also like this position which is
the second from the neck and that's giving me just these so it's sort of simulating a middle pickup
there and that's softening that attack a bit. So I changed between those for different songs
basically. And yeah I've got the 5-string the Ernie Ball regular slinky 5-string pack
and yeah and I'm using stock pickups on this and what I really love also about this bass is
it is active so it has active EQ treble mid and bass and the active EQ on this is
so insanely powerful. Like the boost it gives to each of those is kind of more than you could ever
want which gives you like so much range and lets me do a lot with my sound. I do a lot with feedback
throughout the set. I do a lot of different sounds and different songs where I might want
to boost the bass or cut the bass to get more mid-range feedback or turn up the treble to get
really bright articulation that cuts through my distortion and I'll get into how I do that once
we go to the pedals. But yeah I've found that the EQ on this bass is just really awesome so
love that part of it. And yeah I just play my bass in standard for 5-strings so it's B, E, A,
D, G and I'm pretty much there throughout the set while the guitars move all around
to different tunings I get to just hang tight in standard so yeah. Alright so here's my bass
pedalboard. I've got a lot going on here so I'll try to walk you through it. I go straight into
a Boss Chromatic Tuner, the T3. I use that as a mute switch as well. From there I go into
this Ibanez Pentatone Gate which I really love. This does a 4-cable system where
it's getting the articulation directly from the tuner but it's not gating until after I go through
my whole distortion chain so what that allows me is like if I can have my gate on I can have
really really high gain distortion and even if I just touch a note this is always going to be set
at the right threshold so that it cuts through with any volume touch and then it cuts out as
soon as I'm done playing because it's always monitoring the clean signal and then affecting
after the distortion. So from there I go to this switch blade which is Electro-Harmonix
and I use this to switch between and blend two different distortion chains
with my clean signal as well. So the reason I do that is because the clean signal gives me
a clean low end unaffected and also a clean articulation unaffected so when I play with my
fuzz I'm still getting the sound of the pick on the string and I'm still getting the clarity of a
low bassy note and so that's sending to two separate distortion chains. One is this over here
that's my A-chain and it's based around the Big Muff sound. This is the Big Muff Russian reissue
from Electro-Harmonix. I really love it. I used to play a Big Muff Pi and then I tried one of these
and it's just a really like gutsy heavy drive fuzz and before I go to the Big Muff though I have this
MXR Poly Blue octave and the Big Muff is basically always on for this chain.
This I switch on and off and what this is doing is giving me a sub octave and a little bit of an
octave below that even and then a little bit of two octaves up and all of that is going into
the Big Muff which it just gives it it's like a roaring sound. You're not getting the clarity of
those different octaves because it's all going into the fuzz but it becomes like a little bit
incomprehensible where the actual note is sitting and because I'm blending in the dry signal I can
get away with that. So that's the Distortion A-chain. The B-chain is this Carbide Distortion
from Catlin Bread and this is basically modeled after the Swedish Chainsaw sound.
That's a HM-2 with all the knobs turned fully up. It's a super high mid sort of
sounds like factory machinery grinding away basically and yeah what they did is they basically
made that sound the the basis for this pedal and then they added a dry blend which is great for
bassists because you can do what I was talking about here but just with this pedal. So it's the
dry blend the wet blend and then it has this sort of emphasis where you can kind of tweak where that
mid-range is sitting but that's just a sound I really love the Swedish Chainsaw and I will use
that again with the clean signal or blend it in with the the octave fuzz pedal so I can use basically
both distortion chains and that clean signal at once which I will do throughout the set.
So after all of that it goes back to the Ibanez Pentatone gate so then it's gated and from there I
go to my time-based effects which are all just the Canyon Delay. This is also Electro-Harmonix.
I love this pedal it has like a ridiculous amount of different effects and settings on it.
I mostly in our current set use just like I kind of set it and forget it with a tape delay it has
but I've also in the past I've used it as my octave pedal because it has an octave delay and
you can just set the timing all the way down and it's actually really effective really great
tracking just to use as an octave pedal that way so highly recommend that.
After that I have this Old Blood Noise Endeavors Haunt fuzz I believe it's called yeah Haunt.
This is a cool fuzz pedal I got I wanted something to put at the end of my effects chain
that I could just kind of like hit on and get a little bit more gain and distortion in case I want
to do some gnarly feedback or noise stuff. So I use that on occasion throughout a set and I put
that after the delay so I can like if I'm doing a feedback thing I can sort of get really out
control where the delay is even fighting with my input signal and then from there I go to
my compressor which is a Keeley Bassist limiting amplifier. I have that set so
it's mostly hitting the threshold when I do have my distortion on and it cleans up everything that's
going on and kind of helps me know that like I'm going to have an even signal no matter where my
distortion is set or which combination of effects I'm using I get that clean signal and that the
articulation isn't going to be too out of control and too bright because I do have that coming
and then very last thing is the Darkglass Microtubes B7K and this is just a preamp that
I use always on and it's kind of just cleaning up my signal it's adding a little bit of distortion
at the end of the chain and kind of giving me what I like to think of as the like
Ampeg sound I've always liked Ampeg amps and they have this like very extreme sort of scooped sound
where you can really emphasize the bass and the treble with the like bright switch and the high
low switches so I kind of think that's what I get out of this it makes it so like even if I'm
an amp head or anything I can kind of get that sound going in and get that sound going straight
to the board because we'll do a DI out of my pedal board as well as a mic on the speaker cabinet
so yeah so we go from the pedal board to a DI which we don't have set up yet but the DI goes
out to the PA and we also use the DI for the monitors so we're not getting too much rumble
in the monitors we just get the the crunch and the articulation of my bass and then for touring
I'm using this Gensben's Shuttle 6 this is an amp that Richard our guitarist turned me on to he
played in his band NR experimental metal band the bassist of that band was using a Gensben's
Shuttle 6 and when we were looking for a solution for tour Richard thought of this it's an incredibly
powerful amp and like incredibly light it's actually like so powerful and light that I
usually just keep it on the floor because it will dance itself off of the speaker cabinet like
the its output is that strong and it's like really low weight so it's great for touring
it sounds great on every cab I've played it on and it also has this sort of scoop feature I'll
turn the lights off there but I usually do these all on and that gives me the um that sort of
Ampeg sound I was talking about and it has a tube preamp as well which you can drive to get a little
bit of distortion but I already have so much distortion on the chain I'm not really using it
in that way but yeah and then from there a lot of times I'm renting or borrowing cabs on tour
so there is some like adjusting of the EQ on the Ampeg to to fit whatever I have
this tour I'm really really loving what we have it's uh borrowed from our our support band
Null um Lucas was kind enough to let me borrow this for this tour it's a SWR Henry the 8x8 it's
eight eight inch speakers with this tweeter as well and I have never played on something like
this I'm more used to playing on like a 215 cab is what I have at home um so this is like almost
on the opposite end of that um I would say almost like an Ampeg fridge but more compact but it has
that tight um middle end response and uh yeah I've actually I've been loving this
cab so much I know they're pretty rare and hard to come by so Lucas kind of um lucked out with
this one uh but it has gotten me thinking about how to work with a more compact cab situation
so I'm excited to get home and look at some options for that but uh yeah and that's that's
my rig thank you so much for watching you can find Agriculture at agriculturemusic.bandcamp.com
we're on Instagram agriculturemusic.com for tour updates uh nowflensing.com for our label
all the merch there you can follow me at lia.happiness on Instagram and uh yeah
thank you so much for watching