Axcel Driver Sight UPDATED and Even Lighter!

The Precision of Crossbowry
1 follower
Apr 22, 2026
Axcel Driver Sight UPDATED and Even Lighter!
Comments are disabled for this video.
Hey everybody, PJ Reilly from Lancaster Archery in our video studio. Today we wanted to give you an
updated video on the Excel driver. So this is a brand new site out from the folks at Excel. It's
already gotten a lot of hype and is super hot. We brought you a video on it with Brandon Reyes
maybe a month or two ago, but they've made some changes to it and that will affect what you're
going to see in the marketplace because they made the changes before anyone else. So we wanted to
tell you about it. We just decided we'd do a whole new video so you can see this site.
So this is a super light site from the folks at Excel. We'll weigh it here in a second.
What you're looking at here is the bridge lock version. So this is going to fit all those
Matthews bows that have the bridge lock receiver built into the riser. There will also be
Picatinny mounts and standard dovetail that you would mount onto the side of any bow.
But this one, as I mentioned, is the bridge lock. So we've got this short little bar here,
but this is a wheel driven site. As you can see here, we've got a nice big rubber tire or
not sure what Excel's calling it, but we got nice rubber on the outside, just super smooth
to move up and down. And it's going to be, let's measure it right now. My fingers are here.
So it's going to, you're going to be able to go the full length of the dial here. It's not
a full turn. I think it's a little more than half a turn. Yeah, it's about three quarters
of a revolution will take you all the way from the top to all the way to the bottom.
So that's a handy feature there. You know, you're going to be able to move quickly onto it.
What I have here is the three pin version. So this is probably going to be the most common.
There are, Excel has a ton of different versions of this scope, five pin, single pin, two pin,
ranger pin. They just have a lot of configurations. Three pin's probably going to be standard.
How I'm going to set this up is I'm going to set that. I'm going to have my site in with my wheel
all the way to the top. I'm going to lock it in. And then my top pin is going to be 20 yards,
30 yards, 40 yards. And then I'm going to use my bottom indicator here for everything past 40.
That's how I'm going to set this up. And you can see here, we've got three indicators,
one for each of those pins. So one of the things that I like is that you can see the holes that
these screws are mounted into, they're slotted. So that allows you, gives you a little bit of
up and down movement to get these indicators precisely where you want them on your site tape.
And each of them have it. So you've got that maneuverability with each of those pins,
each of those site pin indicators, great feature there. While we're on the subject of site tapes,
one of the changes made is you can see I've got three holes for the mounting,
for the screw that holds the site tape in place. Previously it was slotted, now we have three holes
here. So you can fine tune the position of this site tape as you're trying to get this thing
dialed in. And all of that, you know, you've got different mounting holes, but all of that is done
so that you can get your indicators and your site tapes exactly where you need them. And the goal
is to be able to set, you know, especially for a three pin site, you want to be able to have
your zero as high up as you can get it. That, what that does is then that gives you the maximum
distance down. So you're going to be able to shoot this out as far as possible. You can see the site
tape goes to 130 yards. I'm probably not getting 130 with my setup. I'm going to have arrow contact
before then, but still the goal is you want to be able to zero it all the way up. And what I like
is they have a movable hard stop. You can see that right there. You can see I've got many places to
mount that. It's in a slot, all kinds of adjustments that you need to get that hard stop exactly where
you want it. That's super handy. You know, if I have, you know, I'm in a hunting situation and I
had to move this down to say 60 yards, but now I want to get it back home. I don't even have to
look at it, turn the wheel up and I'm good to go. So those are all excellent features. Incidentally,
this is your locking knob right there. So that allows me to move up and down and Excel does
have a true lock. When that is in the locked position, you cannot move this wheel. So folks
who like that, they have that built in. It is a true lock. You won't move it. And it's in a handy
spot. I'll say, you know, if this is where I'm adjusting, that's all I got to do to move it,
come back up, press it in. It is in a handy location. Now, one of the other adjustments
that they made is the windage knob is on the inside here. So I'm sighting in, I'm just going
to turn my bow sideways. This is going to be my lock. That's in the free position. And then that
is the lock. So it doesn't move. And it is a micro click, you know, Excel builds a lot of target
sites. And so they bring a lot of that technology into their hunting sites. This is a micro click
windage knob. I know some folks, they're going to see this on the inside and be like, ah, that's a
strange position. Truthfully though, you really only are going to mess with that once. When you're
sighting in, as soon as you get your sites exactly where you want them, how many times do you ever go
back and change the windage? And as I was sighting in, it was fine where it was. So I didn't mind it
at all, but it is on the inside there. Now let's talk about adjustments here. So one of the things
that Excel did, as we talked about, this thing is super light. And if you're familiar with Excel
sites, you can tell that the distance from the scope to the rail is a lot shorter. They got rid
of a lot of parts in between there that they used to have. And one of the things that allowed them
to do was to eliminate what we'll call the second axis adjustment. They still have it, but what it
is, is the first and second axis are married now together. So it's right here. It's going to be
these two screws, and we do have a micro adjust. So what's going to happen is you're going to
loosen these two screws, and then this one, you're going to turn it in and out. What that's going to
do is it's going to pitch the whole bar this way. And that is your second axis. We call it the first
axis when you do it from here. We call it the second axis when it does the scope. But what
Excel is saying is that they are ensuring that your scope is perfectly at a 90 degree angle.
So as long as this is level when you're doing your level, you know that the scope is going to be
leveled this way too. So just one less adjustment there. And then of course, your third axis
adjustment is going to be right here. Third axis, what that affects is this way.
Now on the back here, you're going to notice this screw right there. That allows you to change out
scopes if you want to do that. Again, if you want to go from the three pin, if you want to go to a
single pin, all you need to do is change out scopes. Speaking of pins, this is Excel's Acustat
2 scope. I think this is one of the best hunting scopes in the business. First off, because they
use excellent pin fiber in here. Excel sites have one of the few scopes with fiber where I can see
10 thousands. You younger guys, you can probably see that on a lot of scopes. For me personally,
there are a lot of sites where I can't see their 10 thousands pin. On the Acustat 2,
I can see their 10 thousands. Right now I have 19 thousands and just they're super bright.
Because of that, you're going to have your rheostat cover, which just slides over top like
this. You can get that pin to the exact brightness that you want using this rheostat cover. They've
had that for a while. And it's a super handy feature. Now, one of the other great features
of the Acustat 2 scopes is right here. These are going to be your pin adjustments.
And you can move each pin individually, micro adjust. All I'm going to do is I'm going to
loosen the screw that corresponds with each pin. Of course, I have a top, middle, and a bottom.
Matches my pins, obviously. So if I loosen the top one, I come down here and just I can maneuver
that micro adjust up and down. I'm just going to turn it one way to make it go up, one way to make
it go down. And only that pin moves. Come back, lock it into place, go to my second pin, and so
on. So Acustat 2 scope, they've had that for a while. That thing is bulletproof. Now, as we
mentioned, in the pack, you will get both metal and paper sight tapes. So that's going to be what
you see here. And I had a fellow ask recently, you see that it goes 2, 3, 4, 5, 6, 7. So what
Excel does is that's meant to mimic 20, 30, 40, 50, 60. You would put a zero after each number.
By eliminating the zero, you can see the numbers are easier to see. If they had to make room for
a zero, they'd have to shrink that number down. So these are yardage tapes. Those are the distances
and they are calibrated depending on the speed of the bow. In other words, 80 to 90,
whatever speed corresponds with this sight tape, that would be the correct calibration.
But I never thought of that before that that wasn't clear that these are meant to be 20,
30, 40, 50 when they have 2, 3, 4, 5. So anyway, as I mentioned, ending at 13, that's 130.
But let's weigh this thing. I want to show you this because it's ridiculous how light this is.
And Excel says this is one of the lightest, certainly, if not the lightest. I haven't
weighed everything, so I won't make that claim, but I certainly can say it's one of the lightest.
And again, this is the BridgeLock version with the 3-pin Acustat scope and we have
8.5 ounces. That's ridiculously light. So you western hunters who are very concerned about
how much weight you're taking and have an 8.5-ounce sight and go back maybe six, seven
years, these sights were definitely a lot heavier. Now inside here, just for customization, if you
are into that, Excel does have a whole series of what they call hub caps. And there's three
screws that hold this into place. It just pops in there, give you a little personalization for it.
The screws will hold it in. I don't have them with me, but hub caps for your Excel driver,
just to make them look cool. All right, that is the brand new driver sight from the folks at
Excel. And this is the updated one. This is the one that consumers will see on the market.
Great new sight, ultralight sight from the folks at Excel. If you want to see the different
versions of this sight, the different mounting options, the different scopes,
et cetera, be sure to click the link in the description below. If you like this video,
give us a thumbs up. If you want to see more videos like it, subscribe to our YouTube channel.
Don't forget to click that bell to get notifications whenever we put out new videos.
And as always, if you have any questions, you can visit us at LancasterArchery.com.
