We're almost there! The last step before the Lavacrete Utility Lodge Workshop is to build the forms for the first lift and set the rebar. https://youtu.be/hSjJZqqu6aY
Hey, it's 820 the night before our meet-and-greet and Arlie is in a labor. So we're down here at the barn. Hopefully we can catch it
Just give her a little space if she wants to live in. I always turn to her so that's what I do.
You're so good with your glasses.
I know, I know.
You're just tremendous.
What's happening to me?
You got it, Arlie.
Good job. It's your twin, Arlie.
Oh, good. Good job, Aiden.
Is it attached? Is its umbilical?
Oh my gosh, that's a big baby.
It's a really big baby.
It looks just like her.
It's got the stripe down its back and everything.
It's a really big baby.
Oh, the ears. I just noticed its ears.
Oh, that's adorable.
You're doing so good, Aiden.
There you go.
Good job.
Longest legs.
Oh my gosh.
That's adorable.
Good job.
They are twins.
That's crazy.
Still like to wobble.
Well, good morning, friends.
It has been a crazy
couple of weeks as we have been
racing against the clock to get ready
for the Lava Creek Utility Lodge workshop.
This included a bunch of groundwork,
setting forms, stubbing up plumbing
and utilities into and out of the building
and then pouring the concrete floor
and stem wall with the help from our friends
at Wilcox Rock and Sand.
Now, in case you're new around here,
Lava Creek is a really cool under-the-radar
alternative building technique that uses
scoria sand, cement or lime and rebar
to create beautiful walls that don't need
plaster or finishing work.
The porosity of the material and the way
you mix it and pack it into the forms
means that it's thermally efficient,
acoustically insulated and really easy to build.
Speaking of forms, our last step
before the Lava Creek workshop starts is to
go ahead and put in the first set
of forms and rebar.
Now, we've technically never done anything like this.
It's kind of similar to the bond beam forms
for the Hyper W roundhouse,
with a few key differences.
The biggest change from our bond beam
is the use of this spreader bar.
So, they come in a lot of different sizes
and you buy them specifically for what you need.
In this case, this is a 12 inch spread
from here to here and then these are
3 quarter inch clips, which is perfect because
we're using 3 quarter inch plywood.
The lower clips are screwed in with a concrete anchor
every two feet and the top ones just sit
in place to keep the two sides vertical
and spaced properly. Eventually, the bottom clips
will get cut off when we're finished with the building
and the top ones will keep getting moved up
as we add new sections of plywood.
This is actually going pretty well.
Huge shout out to our neighbor Tom for coming over
and helping us get these first pieces of plywood in place.
Alright, so
we've been just playing around with this
a little bit. We've never done this before.
Learning a lot of things.
It's really weird. It's like you almost have to build
to the negative space
because you want the inside to be nice
and clean and the outside can have all the
little scabs and the pieces of 2x4
and all the kind of ugly bits on the outside.
But it doesn't really matter because you're pouring the material
on the inside.
Trying to get these corners plumbed
and sturdy
and even was
tricky. But I think we figured this out.
This isn't too bad.
But before we do this last wall, we realized
that we have to have the door form in
because the other forms are going
to connect to the door form.
So anyway, we know what door
we're using. We know what size it needs to be.
So we're going to build ourselves a door form
and then I think that'll probably
be it for the day.
But I feel like we've made really good progress.
Especially considering we weren't really sure
how this was going to work. It doesn't mean that we're done.
We still have our whalers
to put on. These are 2x4s
that will go all the way down. It will really straighten
that wall out because the plywood is a little wobbly.
And if we need to do any actual
additional kickers and stuff, we'll do that later.
But right now we're just trying to get
the basics finished. Wish us luck.
What are you doing?
Look how cute he is!
Awww!
End of the day,
we got the door form in. It is
plumbed and squared and ready to go.
So we just need to do
that little bit where Trona is and then
this wall. And then we have to do some
additional bracing and supporting to even
everything out. But I mean,
this has been great progress for the first day.
So we'll get back to this. We still have
a few days before the workshop. I think we're good.
You think we're good? Yeah.
We're more than good. You know what?
What? We're great.
Good morning from the goat barn. I thought I'd give a quick
update. Baby goats are
officially 6 weeks old.
They're getting separated. Well, the older
ones are getting separated twice
where we can milk twice a day.
And
the littlest ones, we're only
separating
once a day to where we can milk the moms
once. Pretty soon
it'll be twice a day milking
for everyone. Right now we're getting almost
a gallon of milk a day. So
that's going to increase here in a
little bit. But that means
more goat milk cheese,
more goat milk ice cream,
more goat
milk chai lattes.
The best part about having baby goats though is
really just being able to sit out here
and watch them play.
It's the cutest thing. This little white one
is about to fall asleep. This is
a little boy, that little buckling.
He's just been standing there
for a couple minutes. He looks like he's about to
fall asleep. All of them
are very rambunctious
and super adorable. We're still
looking for homes for
4 boys and 2 girls. We are
keeping Arlie's
baby Marley, but
we need homes for the
other 6. So we have 4
boys and 2 girls
that really need a home.
So if you're in the market, please
let me know. You can send us a message
at hello at tinyshinyhome.com
and
yeah, maybe you will
end up with one of our goats.
Let's just enjoy them playing because
I don't want to do anything today. I kind of
just want to sit and watch baby goats.
I mean, how cute is this?
This is Arlie.
No, Marley. That's Marley.
That's the one.
Alright, we are back
out. We spent the last part of yesterday
getting the rest of the forms put in.
So I was going to show you kind of real quick
how it works.
Like I was saying the other day,
you almost have to think backwards
in how you build stuff because you want
the inside of the
form to be nice and clean.
The outside can have all these little
scabs and plates and
the 2x4s can be all
weird here, but
what matters the most is that
when you're pouring the wall, you have
this nice, clean, sharp
edge everywhere. So the door
was definitely the most complicated. It took us
the longest to figure out. And here's
the thing. You can do
this a zillion different ways,
right? I know that Gurudas does
his corners with way
more like 2x6s and stuff. We
just ended up using a single
2x4. We added
a plate this way and then screwed it
in here so that we can take it off
easily because if we screwed
through the back of the form,
there's lava creep there and then you can't get it off, right?
For the door, we continued
to use our 16-inch
pieces of plywood, which meant that the
form is actually wider than the wall
because the wall is only 12 inches.
So then we attached multiple
2x4s. It's kind of hard to see.
But we added like one here
and one here.
And so basically, this
piece of wood is going to dictate
where these walls
go. And that does include the scab,
right? So the scab is going to go there and that should
get us exactly to that
12-inch dimension.
Theoretically. So we had to do that on
all sides. We had to do the
corners again with these little plates.
And we didn't here. We just let it
run over and we screwed it in that way.
But I think the hardest part is just like
it all has to be plumb
and square and level and
all of those things. And so it's just when you're
doing it, it's really hard to get
all of those things to line up all
at the same time. So all these walls
back here, they
went pretty quickly. They weren't that difficult.
This was definitely the most
difficult. Doing all of this work
around the door and then having that
match up to these tiny little corners
here and then to this
corner here. We are going to have some windows
so we'll have to do this again later but that won't
be until the workshop. So there's still a few
steps for these forms.
First is that we need
to put our rebar inside
here. We need to tie it to our verticals.
We'll just start a little ways up.
And then it's every four feet so
we don't need to put the next one until quite a ways
up. Almost up here. But we need to
get one down inside there that goes all
the way around. We need to make sure we bend it.
We turn the corners so that we've got good
structural strength around the edges.
And then if there's any wobble in this,
we're going to be putting two byes
on the strong side all the way down
on each side. And we might even put
kickers in. We're going to wait until
Guru Das gets here for that though.
We're just going to focus on the rebar today.
He's coming in early tomorrow
before the workshop starts.
We'll get the last little bit buttoned up.
And that was a good one.
It's way
too good.
Don't look!