Fusion 360 How to Convert A Photo to a Cnc File using Fusions Canvas Tool Langmuir Systems

Creative 3D objects
9 followers
#gjwarts #drawing #art #digitalart #3dmax #sketch #interior #creative3D #howtodraw #3ddraw #3Dobject
Welcome back guys. Today I want to show you how to draw a cuttable or machinable file
based off of a photograph. So before you get settled in make sure to hit that subscribe
and like button and we'll see if we can't get you cutting sparks.
So we're going to show you a really cool function that Fusion 360 has called the canvas function
and what this allows us to do is turn a average photograph that you can take with your cell phone
or camera into a cuttable or machinable drawing with some pretty good accuracy.
So the first thing you're going to want to do is you're going to want to take a photograph
of whatever it is that you want to cut out and the best thing to do is make sure it's
on a contrasting background. I had the customer lay it down on a white piece of paper to do that
and you want to take that photo as square on as possible. Now the great thing about this too is
the customer did this and sent it to me. So this customer is in a different county. Now this really
opens up some opportunities for you. It is not foolproof but it allows you to not have to go to
customer's house and take measurements in every case. Be able to do a lot of your drawing work
from right off your couch with your family instead of having to go out in the field as much. So
let's get started we'll show you how this works. Okay so the first thing you're going to want to
do is make sure that photograph is in a place where you can find it. So I always like to make
a file right on my desktop that's for pictures like this so we can see that our proper photo
is right there in that file so we know where that's at. Next thing we're going to want to do
is open up fusion 360 and for the linear systems we want to make sure that our axes are with the
z-axis pointing towards us our y-axis in the north-south and our x in the east-west orientation
so just like this with the cube facing frontwards. Next thing we're going to want to do is go over
to our left upper side over here and hit create sketch double click on that and then go down to
your plane and double click on your plane and this will open up your sketch you can see over
on your right side that your sketch template is here you can have that closed up though just so
it's out of the way. Next thing we're going to want to do is go up to our upper right hand side
to the insert drop down and we're going to click on that and scroll down to the canvas function.
Now we're going to double click on our canvas function and this is going to bring up this
window here and we want to go on the lower left hand side to this
insert from my computer this is going to allow you to bring that file in from your desktop so
and then we're going to scroll up i'm going to find my desktop click on that and then here's
my pictures file so we'll select the picture of this gasket that we had here. Now the photo
is over here on the right side or the drop down for the photo I should say. The next thing it
wants you to do is to select the face and what that basically means is just select this plane
so you want to go over to what this is called your origin of your drawing and you can see that
change color and you want to double click on that and there is our photo right there in the drop
down. Now you want to come over you don't want to select any values in this yet and we are going to
come over and select the okay button. So we have our photo sitting here and we can scroll into it
now it's kind of an opaque color so this is going to allow us to draw over top of it so the next
thing we want to do is we want to make sure that this photograph is to scale so we have an accurate
representation of what we're drawing over so how we're going to do that is we're going to go into
our upper left hand corner and we're going to hit the arrow drop down for our canvas and that'll
drop down and this little window right here is going to be our sketch so we're going to right
click on that and scroll down to this window to decalibrate. Now I inquired with the customer
and they said that the small holes are three-eighths of an inch in diameter so we're going to zoom into
our three-eighths of an inch hole and we're going to take our cursor here you can see the little x
it's kind of hard to see and we're going to try to hit as close to we can on the edge of that hole
and click it once you can see it left a marker there and then we're going to drop down to the
opposing side of that hole and click again now currently it shows us what our scale is and right
now that hole is 70 thousandths which is way too small so we're going to put the correct diameter
of that hole so three-eighths of an inch equals 0.375 thousandths so 0.375 and hit the enter
now it made it much bigger so we're going to scroll out and now our drawing should be
to scale a quick way to confirm this is we can start to draw over top of it so we're going to
make a circle so quick key for your circle is the c key so you can hit the c key and then I'm going
to zoom in on this guy I'm going to try to guess the center of that circle click it and then draw
it out and I'm going to input three-eighths of an inch so 0.375 click and there you go so you can
see that that circle is pretty close to the diameter so I think we're pretty accurate there
and we can continue so obviously you have your canvas here and we can keep on drawing over it
so I'm going to hit circle input again I'm going to come over to this guy and I'm going to make
another three-eighths circle because I know that this hole is three-eighths of an inch so 0.375
enter and there we go now we can just use the rest of it to work off of so we can take our circle
again hit c for quick going to center and we're going to drag this out until it hits our outline
right there there we go that's pretty close so we're going to enter our circle in here and let's I'm going
to see if I can kind of construct what's broken out of this as well there's no sense drawing a
broken thing here so we're going to take and I'm going to assume that this is a three-eighths of an
inch circle here as well there we go now we have all of our main components drawn out so now I'm
going to go and try to match this radius here so I'm going to hit my c for circle again and bring
out a larger circle and kind of kind of match that lower radius right there which I like that
and we're going to come over here and hit a circle here and try to match this radius so it meets up
there with the edge of that upper right hand part so that's pretty close right in there now I think
we can hit l for our quick key to make a line and we're going to come up here click that drag across
till we get straight you can see the indicator right there till we're straight across and input
that line and then I'm going to take go from up here at our bend with another line I'm going to
draw down until we intersect that circle again and put that line and so on and so forth so
watch for a second as we get this all constructed
okay so we got everything done but these last two things and I want to show you a quick another
function here it is a three point arc that's super useful in drawing over things like this
it's going to be in our upper left hand corner in the create drop down we're going to go to arc
and hit three point arc and what we can do here is we can click on two points that we are
intersecting between there and there and then once those two are established you can kind of have
this little guy to drag around and just kind of make that arc whatever you want it to be there so
this doesn't have to be right on because obviously this gasket's kind of tattered so
that worked for that arc there and I'm going to make this just one continuous arc right here as
well so we're going to come up here drop that and sweep that into there so it's a nice clean line
so now that we've got everything drawn out we're going to go through and clean up these lines that
we don't want so we're going to hit the t key which is our quick key for trim function or the
erase function so hit your t and then go over to highlight it and click on it and just erase all
these other lines that we are not going to use so these were just kind of build lines go through
and get those erased and looky here we so we're going to we're going to cancel out of our trim
function now that we're done with it and looky here we have a sketch over this gasket that we've
drawn up so the last thing we want to do before we start writing a tool path on this guy is you
definitely want to extrude it it'll make writing your tool path for for laying your system so much
easier and so right click on that hit press pull we're going to cut this out a quarter inch so
this is 0.25 the values we're going to put in there enter and we have our part so you can see
it right there and then you can come over here to your left side and hit this eyeball and get
rid of the canvas and just look at the part we've got so so thanks for watching guys hopefully this
is helpful i've been able to use this in several applications one important thing to note is
your accuracy is going to depend on your photograph so what i mean by that is when you
take a photograph you are going to get a forced perspective so the closer you are able to be to
that part and the straighter on the less that perspective is going to be forced so it's going
to give you a lot more accurate representation so for example that gasket he was able to get
really close in there and we were able to get within like a 32nd of an inch on those maybe
even a little tighter whereas i've used this function for drawing up an axle truss and i can
get behind the vehicle squat down and take a photo of that axle and then import it in and draw the
entire truss based off that photo around it and i didn't have to sit there and measure it i could
just draw right around it but being so i had to be further back to be able to take that photograph
i had more of a forced perspective and then my tolerances were more like within
an eighth of an inch versus a sixteenth of an inch or less so take that into account when you
are taking your photographs so hopefully this was helpful if it was please leave a like and
subscribe for more videos down the road make sure to leave a comment if there's anything that you
are having trouble with and i'll do my best to answer those questions and maybe put a video out
so take care guys and go build something
