ULTIMATE Bow Sight Tuning TOOL

Exploring Ancient Crossbows
3 followers
1 Video View·Apr 20, 2026
ULTIMATE Bow Sight Tuning TOOL
Comments are disabled for this video.
What's going on everyone, welcome to today's video. Today's video is brought to you by
Lancaster Archery Supply for all your 3D and target archery needs. I think that's their slogan.
Did we ever figure out their slogan from the last video? 3D and target archery?
Leading the world in 3D and target archery. Leading the world in 3D and target archery.
If you ever call in there they have like this catchy jingle. Anyways, we have an unboxing.
Today sent in from Lancaster Archery. We're going to open this bad boy up and I kind of know what
it is but I've never used it. I don't think so. It's going to be a good one. Let's go ahead and
dive right in. We have Hamski Gen 2 Pro third axis level. So I have their original one,
their generation one I suppose. But this is the Gen 2. It's got a couple extra little features.
New compact design. They got a patent on it. Maximizing accuracy. Said twice on both sides.
So it's double maximizing. Interesting. And we got a bunch of garbage there. And we got some extra
stickers. There we go. Alright, so let's open this bad boy up. There's really not a whole lot
unpacking. It's pretty standard. And what you get with this is you have this dealio.
And then that dealio. So this is very similar to the one, the first generation I suppose.
It's a clamp. But it has, I think it has an extra level on it. Looks like a more robust bracket that
comes in and out. So you spin this side and that bracket comes in and out. So that's pretty robust.
Let me see, let me see if I can find my other one. This was the first generation. Pretty standard.
There was one level, this one twisty tie, or twisty thing. And you were limited on how wide
it was already. But this one, this one's upgraded a little bit. And I think you can get it,
get it out pretty far all the way. You can get out pretty far. Oh, it's the same zap. Never mind.
So there's nothing, no new news there. It's just a little bit different design. You're still, that's
the maximum. But we got an extra level, a couple extra cool things. So let's go ahead and throw
this on a bow and show all the features that this Hamski third axis level can do. Okay, so you
actually get very detailed instructions how to go over your first, second, and third axis
leveling on your bow, right with the packaging. You just open it right up. So that is very nifty.
So we're going to go over here. I have a bow. This is my TRX 34. I just jacked up this side.
I moved it all around. So it's going to be messed up somewhat. So we're going to have to fix it.
You will need a bow vice of some sorts to do this. I am using last chance archery, easy press.
It's pretty good press or vice. I just say it's not a, not a press, but when you do need an
emptied, an empty bow, so no bows, no like accessories on it, or it just gets too heavy.
All right. So I'm actually going to go step-by-step with these directions. I do know how to do it,
but just step-by-step. Oh, Riley's here. Come on in, sir. We're filming a bit, but you can
stand behind the scenes. Cool. Were you rolling through that all the way? Yeah. All right. We
should keep that in there. Okay. So we're going to go, we're going to go step-by-step. I know how
to do it, but we're just going to go step-by-step through how Hamsky has the directions. So step
one is leveling the bow. This is why you need a bow vice, relatively sturdy, relative. So I'm just
going to eyeball this. Then it says you take your leveling device and it has a, a little string
groove on it. And you're actually going to clamp this right to your string. I just backed it all
the way out for the last, but there's a little string groove right there. So what you're going
to do is you're going to bring it over here and install it on your string. You're going to make
your string completely level, which is going to make your bow completely level. You know what
might actually be better? Let's put it on the bow press for this. Bow press. If you have the last
chance bow press that can spin up and down, it's like rock solid. I want it to be rock solid.
All right. So we're moved over to the bow press now. This will just give us a more solid working
space. Pretty close. I'm actually just going to move the legs on the bottom of the press to get
this money. All right. So now I guess if you have a very solid foundation with your bow press and
you level your bow press, you should be pretty good every time you do this. So we just leveled
our bow press and we're rock solid right now. Let's tighten this back down a little bit.
We're level. Our string's level. Our bow is 100, 99%, 100% level. So now we got that locked down.
Now you're going to take this. Let me grab the instructions.
You're going to take this and use this on your first axis. So your first axis is actually,
if you have a site like an Excel or Shibuya, you're going to first use it on your first axis,
which is this right here, which is using these two screws and inside these two screws,
the holes that they're in are actually like oval. So when you loosen that, it shifts this way,
your first axis. So if your first axis is off and you go from 20 yards to a hundred yards,
you're actually going to be running your site at a diagonal. So if everything's perfect,
you could have your second axis and your third axis actually right. But your first axis,
first axis could be off and everyone, you know, you do a walk back, tune everything and everything's
good, but you're still getting these dramatic left and right changes as you go from like 20
to a hundred yards could be your first axis. So we're going to check that real quick. It's
always tricky how to find, how to find a good spot on this, but I'm going to use this part
of my AccuTouch. This actually might be good. Yeah. So mine's good. I didn't move this when
I jacked it all up. Um, but you see, see that's a hundred percent good. The bow is a hundred percent
good. So my first axis up and down this way is a hundred percent. So now, now what you're going
to do is your second axis. So your second axis, you're actually going to keep it on the site
bar where we just had it. And you're going to double check the bubble level in your site.
So let's look at that. Put this on. It doesn't matter how you have it. I guess I'll have it
like that. Okay. That level is a hundred percent. Now we look at our scope on our scope is pretty
dang good. I guess it's slightly off. I wonder if I can just crank on it so you guys can see a
dramatic change here. Let me loosen it. All right. So we have our Hamski tool indicating that true
level is here. And I just loosened the screws to show you guys, but let's say your, your bubble
is down over there. That's wrong. This is your second axis. It goes up and down. This should be
dead nuts matching whatever this level is. So we're going to go ahead and just loosen these
two screws right in front. If you've got AccuTouch, it's labeled second axis,
you loosen these two screws, get that lined up and just line it up right with that.
So we have the levels a hundred percent. It's the first axis done, second axis done. Now we
got to do our third axis. So for the third axis, let's actually see what it says here. It wants us
to do. Okay. So with your Hamski still connected in the same exact spot, it comes with this little
rod. And this rod has a little indicator on each side and what you're going to do is you're going
to put it in this top little screw hole. There's a screw hole right on the top, either side.
I'm going to thread this all the way through. About to right there. So you can see each side.
Then I already did this off camera, but I just created a plumb bob.
And if you don't know what a plumb bob is, it's essentially you tie a piece of string
up to the ceiling, put something heavy underneath. So the gravity's pulling it
in a directly straight line. So then what you're going to do is you're going to take your bow
and you're actually going to draw it back and check it at full draw. So let's take an arrow
and you're going to draw the bow back and line up with each indicator.
You might have to move this around to the bottom side of the site if you can't see it,
but what you're going to do is you're going to draw back and you're going to indicate
this top part and bottom part right on the line. And then at the same time with your other eye,
you're going to look and see where the level is to see if it's kind of goofy. I know,
but this is legit because when you draw back, your bow does different things.
So we're going to start at directly just straight, just to get a feel for it
and see if I can see the thing. Okay. I can see it. I can see it and I'm level.
So my second axis, obviously it's good, but now what you're going to do,
so you're going to either go down or up at a 45 degree angle, line up your plumb string
with this rod, and then check your bubble. And then from there, depending on if it's on or not,
is you're going to move your site in and out, which is your third axis.
So let's see, I'm going to go down. I got to move this. So what I'm going to do,
I really can't see the top part. So what I'm going to do, scrub this down and just put it
on the bottom side so that I can see this line a little bit better. I'm going to mount it right
on this surface. You just got to find a flat surface on your site, not on your bar, but
somewhere on your site. So I'm going to go right there. All right, let's try that again. I just
couldn't see the top and the bottom all the way. Let's try that. So my bubble is just slightly,
slightly to the right. And that takes a little bit of time. And I would suggest doing it several
times, but it is just slightly to the right. So now what we're going to do,
so we're going to bump third axis just a touch. So let's try it again. And this is going to be
a little bit of trial and error. If you're doing this, you're doing this in your basement or in
the shop or whatever, take, take some time doing this. But this is, this is the correct way to do
it. You can do, you can do it with a, with like a bright site, this deal, which I've had in my
videos before. And this is like a quick fix, but the a hundred percent correct way to do it
is this way. So let's try it again. Way off. Wrong way. Still way left. Okay. That's good.
That's like an exercise just to like check on the bubble and check back and forth, but we got it.
So that, and it was very hot in the shop. If you cannot tell I'm sweating on the cheeks,
we had to shut the AC off because it's so loud in there. We were doing our audio,
but there we go. That was actually pretty stupid. Simple. I might even try to wait it just to keep
that plumb bob up there all the time. I might run through my other bows, just to double-check
that they're set up, but there you go. A handsky tool in the handsky tool also is very like
versatile in what it can do. So if you're setting up your bow, if you're setting up your bow and
you need to get your rest aligned and everything, you can put this on your string to get the bow
a hundred percent level and everything. So it's a handy little tool. I've definitely used this a lot,
but it's a neat little feature that they added the string clamp on there. So it kind of,
it kind of eliminates this, which this was what I used to put on the string to get the bow level,
but you can do it all in one. If you've got a really good vice where the bow can't move,
you're all set. So you can get these and this is a brand new item. This just came out,
I believe July 1. So a brand new item and you can pick it up at LancasterArcherySupply.com.
