Blender Gravestone Sculpting Tutorial Polygon Runway

Creative 3D objects
9 followers
#gjwarts #drawing #art #digitalart #3dmax #sketch #interior #creative3D #howtodraw #3ddraw #3Dobject
Hey everyone, it's Pugtober again so let's do some thematic tutorial and I
really hope you will enjoy this one and if you do please don't forget to leave
that like and if you're new around here hit that subscribe. So let's jump right
into Empty Blender file and first of all we'll create some objects that we can
use for a little bit of sculpting. So we can leave the camera in place but let's
get rid of the light and the cube so let's drag the selection press X and
choose delete and now let's press shift A and we'll add a plane. Now tab into the
edit mode and press S then Y and scale it down on y-axis like this and now
we'll basically just get rid of all of the vertices except one so let's drag a
selection like this press X and delete vertices and now let's go to the
modifiers panel and let's add mirror modifier like this and let's choose
clipping. Now let's select this vertex press E then X and extrude towards the
middle and now we can select this one right here let's look from the front so
let's press E and extrude it like this and now let's press E and we'll create
a cutout like that few times and now let's press E again few times to join
this in the middle. Now we can just drag a selection like this and make this
larger or scale it on x-axis by pressing S then X so you know we get some shape
that we like the most but I think this is quite okay and maybe let's bring this
down a notch like that and now we can press A to select all and press F to
fill and now E to extrude so we're at the original thickness of the plane and
now just to be safe press A shift N to recalculate the normals. Now we'll need
some more geometry here but we'll see how this works with modifiers so let's
collapse this and let's add a bevel modifier like this and let's add one
more segment here let's increase angle to something like 50 and in the
geometry setting let's switch this to arc even though this is not probably
required here and let's now tab out and let's add subdivision surface modifier
and here let's increase the levels to 2 and you can see weird subdivision
happening there and that's the place we need to add some geometry so let's press
1 for front view tap into the edit mode we can just press K for a knife tool
snap it right here press A to snap the angle and press C to enable cut through
left click and then enter to confirm and you can see this is much cleaner
right now because the geometry goes through the middle there. If you feel
like this is too fast for you or you don't understand some core concepts make
sure to check out my courses I carefully design them to take you from beginner
skills through low poly illustration all the way to full character illustration
textured environments and much more and I build the courses as creative projects
each with its own style and every time there's a new technique or something
needs explaining we stop for a while and you get an in-depth explanation but in
the end you still get a full project result so if you're interested please
check out the link in the description. Of course you can add some more but I think
it's not necessary right here this will be all just fine so let's right-click
shade smooth and now let's press shift A and let's add a plane. Tab into the edit mode
I'll scale it on x-axis so press S then X and now press E to extrude. S for scale
I for inset and E to extrude again and again S to scale it down. Now we can tab
out let's look from the front we can maybe make it lower so S then Z and
scale it down and press ctrl A and apply that scale like this and now we'll hold
shift select this object and transfer the bevel so click here copy to select
it and then transfer the subdivision as well but as you can see we have some
shading issues right there so let's select that object tab into the edit mode
and we'll add some supporting loops by pressing ctrl R to get some emotional
support for our subdivision modifier like here and from the side as well this
should be okay and now you can play with the bevel so you can lower the amount to
make it a little bit more sharper like this I think they'll be much better and
here as well so let's modify this so it's a little bit sharper and now we'll
move this up so let's look from the front by pressing 1 on a numpad press G
then Z and move this up here and we can make it smaller press ctrl A and apply
the scale now tab into the edit mode and we'll press 3 for face select or click
right here select these two faces by holding shift and adding to selection
and we can press I to inset and press B to enable boundary and just create an
inset like this and now here we can enable auto merge press 1 for vertex
select or again you can change the selection right there and we'll select
this one press G twice and just slide it here so it connects we don't need that
extra vertex there and here we can move this up tiny bit and now press 3 for
face select again select these two faces by holding shift and press E and extrude
this inside now here again as you can see there will be some shading issues so
we'll press ctrl R again and add some more loops and right up here as well
this works nicely we don't need to care about topology in any way right now
because we'll convert this and sculpt anyway so the last two things I want to
do is to create some little details so let's shift and right click here to move
the cursor so shift A and let's add the text object now press R then X and 90
and confirm with enter to rotate 90 degrees let's go to the text settings
and we'll switch this to center and here to the middle let's press S to make this
smaller and I think a thicker font will be fine so I'll just go ahead here and
choose some from my fonts folder it should by default now offer you to pick
the fonts from the Windows font directory if you're on a Windows PC so
let's tab into the edit mode here let's delete this and let's enter our IP tab
and here let's go to geometry and we'll extrude this like this or we don't need
to do it like that let's go back by pressing ctrl Z and we can just right
click and convert to mesh and now we can tab into the edit mode and just extrude
like that press A and shift N to recalculate normals now let's look from
the front and we can move these around a little bit so press 1 for vertex select
click away and then hit L to select only the linked vertices press R to rotate a
little bit and G to move it around and now let's click away and let's press L
again and do it like this here as well maybe make it a little bit larger we'll
see how that works now tab out and press S to scale it all up like here press
ctrl A and apply the scale and now shift right click here let's press shift A and
we'll add a plane now tab into the edit mode press S to scale this down R X and
90 to rotate 90 degrees and press E to extrude and now we can press 3 for face
select alt click this loop to select all around and now alt E and extrude
individual faces and do something like this here and now let's enable X-Ray
view let's select the bottom one press G then Z and move this down like this
and I think this works just fine so we can tab out and yeah disable the X-Ray
view we make it a little bit smaller push it down and again ctrl A and apply
the scale and maybe we can make this a little bit larger okay so this is almost
prepared for sculpting so let's just work with the geometry a little bit more
so we can go ahead here and enable wireframe overlay so we can see what's
happening there and now let's select this one here and right click and just
convert to mesh and they will apply all the modifiers there's no modifier left
here but right now we want to remesh this a little bit so let's go to the
data properties and let's go to remesh and we'll use the voxel remesh and I
think something like 0.005 should be quite dense enough for sculpting here so
let's click voxel remesh let's wait a little bit yeah this is quite dense and
I think this will work nicely with some sculpting maybe it's a little bit too
dense like if you want this if this for example slows down your PC too much
maybe just go back and go 0.01 this is still quite dense but I will go with the
original 0.005 and remesh it and do the same thing with this one so right click
convert to mesh so we apply all the modifiers and now 0.005 voxel size and
remesh and you can see this is why we didn't care about the topology too much
because we want this you know dense mesh ready for sculpting and now let's
do the same thing here and the same thing for the letters okay now we can go
ahead and disable wireframe overlay and this is still shaded smooth but you can
see this is caused by you know the remesh but we'll take care of that in
the sculpt mode so let's just go to the sculpting workspace here and we're
already in the sculpt mode with the object we had selected as last so it's
the text right here so I just want to go to the object mode and select this one
here and go back to the sculpt mode now as you can see I just drag this so I
have two rows or two columns these tools and here you can use mouse so for
example I'm still on my mouse here and the first tool I want to use is the
smooth tool because I want to get rid of those like choppy of this choppy
geometry so we can press F and make this larger or smaller so let's make it quite
large and confirm and now you can modify the string here you can make it really
subtle and then just click with the mouse maybe a little bit stronger and
you can see the smoothing will happen for you but it will be a little bit too
tedious so what I like to do is to use my tablet and then you know apply the
strength with the pressure so but be really subtle I will even drop this down
a little bit and we can just you know smudge a little bit you don't want to
go too hard here because you don't want to round the geometry too much we still
want those sharp edges there even though we'll sculpt through those as
well a little bit later so you know just run through your object and smooth it
a little bit like this here as well on the other side you can see this is still
a bit choppy here as well so like this and now I'll press ctrl tab switch to
object mode select this one ctrl tab and go back to the sculpt mode and
basically do the same thing here here it's not so pronounced so I will just
quickly run over it with the smooth tool nothing too fancy here and again ctrl
tab and switch object and here just a subtle touch of that smooth and you will
see how this nicely rounds and becomes smoother and let's do the same thing
here okay so this is now ready so let's control tab to object mode select this
here go to sculpt mode let's press F make the smaller and let's pick the
scrape tool it's one of my favorite and basically you can just create edges like
this with the scrape tool so this will look like it's carved out of stone I can
just do like these surfaces here and there okay and here we can do this one
okay and now we'll take care of the inside here I want to make this a little
bit sharper there so you can for example use this tool right here to create the
crease you know and edit two planes at once okay let's make this a little bit
sharper and be very subtle here okay and now we can choose the scrape tool again
and do this side here but let's make the tool smaller and let's make this bit
sharper so you get this sharp edge right there and one important thing don't
dwell on in one place too much always move on just do a few strokes and you
know move on on to the next part and then you can just zoom out and do
smaller adjustments here and there so basically just pick the tool decide on
what you want to do with it but then you know do like a one full round with the
tool and then go back into the details if it's necessary so yeah I quite like
this I think this will be enough now one thing we can do here to add a little bit
of a texture is to use the blood brush press F to make it really small and you
can see this is how it works but if you hold ctrl you can kind of cut into the
surface so it goes to the opposite way so we can do like these little dots here
and there and then press F again make it even smaller let me hold ctrl I think
this will look really nice in the end and maybe one or two larger ones okay
now let's hold ctrl tab switch to the object mode select cross and back to the
Scout mode and here again I'll just use the scrape tool to create these edges
like this okay I like it so let's move on here and do the same thing okay don't
forget to save often and let's now go ahead and finish with the last part right
here okay and yeah basically we can add some more detail here with the blood
brush press F to make this smaller hold ctrl and do these small bends here and
there and the key here is again you know not to overdo it not doing too much
dense because this is supposed to be you know very simple and stylized and now
finally you can go into smaller details so if I go back here with the Scout mode
you can pick the clay and for example if you want to make a dent here so the clay
works that it basically just adds material to your scalp but if you hold
ctrl you can go to the other side so you can just kind of chisel into into your
model but again you need to be quite subtle with this and here we can you
know create a little bit of damage now we can use this tool to edit those two
planes a little bit and then use the scrape brush to make it a little bit
sharper here and here as well and then maybe smooth out things around it and
again use scrape to kind of better define those edges so there you have you
know a little bit of of a cut in your stone so you can just go around your
object make few of these but again just don't overdo it sometimes one little
detail you know can be enough so that's the sculpting we can now go back to the
layout view and don't forget to save your project again and we can just
select everything here press 1 for front view press G and Z move this up a little
bit because I want to like incorporate it into the background a little bit
let's hold shift S reset cursor to world origin let's press shift A and let's add
the circle and we'll edit this to 64 vertices tab into the edit mode let's
make it larger and press ctrl F and choose grid fill it will fill it with
mesh like this and we can now press 1 for vertex select select this one in
the middle enable proportional editing and press G then Z and start moving up
and increase you know the influence of the proportional editing with the mouse
wheel or like this and then maybe make this smaller and do like you know
smaller bumps here and there so it looks more natural now let's hold alt select
this loop now alt and shift and select this other one and let's continue by
adding one more row of loops like this and now press S then Z and 0 so it's
flat on the outside now press N for the side panel and let's reset location of
this to 0 they'll place it right down now we can type out let's press shift A
and we can add the plane and just scale it up there'll be our background and
here we can select this one press ctrl 2 to add subdivision surface modifier
right-click and shade smooth and now we can press 0 on an armpit for a camera
view and just go to the view and camera to view and now we can control this
using our viewport controls so let's do something like this here don't forget to
disable this and now select the plane tab into the remote go for edge select
the far edge and press E then Z and extrude it up select this one again
press ctrl B and increase number of segments with the mouse wheel and
confirm tab out and we can right-click and shade is smooth so we have some
infinite background and we can press R then Z and rotate it a little bit
towards the camera and now finally we can add you know a circle press R then X
and 90 to rotate 90 degrees press G then Z move it up and now position it
slightly to the side we can tab in press F to fill with the face tab back out
let's move it further back so press G then Y move it somewhere here now let's
make it larger to create like a moon right here okay now press ctrl B limit
the preview only for camera bounce go to the render settings switch to cycles
enable GPU and I enable gnoising and switch that one to GPU as well and
reduce the samples to something like 512 and now let's press shift a and let's
add a light area light press G then Z move this up and make this larger quite
large in fact and let's switch this to disk and then we can switch the pivot
point to 3d cursor and just rotate it towards the back so we have some nice
backlight here and increase the power to something like 1500 and let's hold press
Z and choose rendered see how that works and we can press G then Z twice on this
light to you know bring this higher up but we're looking at this backlight
right here that will create this nice rim light and you can see how this
nicely connects you know with the plane so we can now select this press shift D
right click to release and press alt R to reset the rotation and just move it
back here switch this to median point and press R twice to rotate it towards
the background a little bit more so we have some background backlight as well
and now here we can add the new material and switch this to emission and to like
five and I think one more area light from the side will be fine so let's
select this one again we'll switch this to 3d cursor press shift D and then R Z
and rotate here and let's look from the side there and we can rotate it until we
start to see because right here it's too in the dark but if you rotate from the
side we'll start seeing the light hitting the front just a tiny bit like
this and we can press alt R and reset the rotation so it goes you know a
little bit more top-down and then reduce this to 500 so yes something like this
and maybe make it a little bit sharper okay now select the background create a
new material and let's make it darker and increase the roughness and do the
same material here so it nicely blends together and yeah I think this looks
quite nice I think I will leave it black and white so let's expand this and
let's switch to shader editor and now let's select the stone create a new
material and we'll create something like an edge mask here so let's press shift A
and we'll go for ambient occlusion and switch this to inside and only local and
reduced samples now if you control shift and click this if you have node wrangler
active you will see the preview of that node if you don't have it active just go
preferences and check your add-ons if you see node wrangler here I have it
right here and it's checked on if you don't see it here go get extensions
search here and then you can just you know locate it and install like any
other extension and then in the add-ons you should be able to see it now let's
push it a and let's add a matte note and we'll switch this here and we'll switch
this to one and we'll subtract so we'll basically subtract from one and now we
can modify this distance and then again another matte note and if it's greater
than some threshold that we will choose it will appear here so this way we can
detect edges like this and now you're basically playing with only those values
you change the distance and you modify the threshold and again by holding
ctrl and shift you can click and preview your notes and now with this done we can
just press shift a add a mix color note plug it into the factor and change the
other one to white and make this a little bit darker okay and just connect
it to the color and don't forget to hold ctrl shift and click the shader so it
connects and now increase the roughness so you have you know some visual
interest on the material there now you can add the same material here as well
but probably you won't be able to see the edge mask so you can duplicate it
here and change these values so you need to go lower on the distance and you know
play with the threshold a little bit probably so it detects it on the side
and we can then use the same one here and again duplicate it and modify the
values a little bit like that and let's try the first one here I think it works
nicely okay and finally we can press shift a add a cube tab into the edit
mode make it larger press G and Z move it up let's tab out let's call this fog
so we can recognize it here and let's enable this filter as well and now
let's create a new material let's remove the surface shader and let's add volume
shader principle volume and now here we can go something like 0.0 1 1 5 I can
see we added a little bit of that fog here and now we can just disable it in
the edit so we are able to select everything inside and now we can play
with those lights so for example if you don't want that dispersion here you can
go to the light settings and disable visibility for the volume scatter but I
like it there I just think we can make it a little bit larger maybe move it up
quite okay and now we can go to the render settings and in the color
management switch the contrast to high contrast and play with the exposure here
so yeah that's it for today's spooktober tutorial and I really hope you enjoyed
this one and again if you did please leave that like and if you're new around
here and you want to learn more hit that subscribe thank you all for watching and
have a wonderful day
