When it comes to 35-ton excavators, two machines dominate job sites worldwide: the Caterpillar 336 and the Komatsu PC360.
But which one is the better investment?
Choosing the wrong excavator could cost you thousands in fuel, repairs, and lost productivity. In this video, we break down everything that matters—power, digging force, fuel efficiency, technology, operator comfort, and long-term cost—to crown a winner.
This is not just a spec comparison… this is a real-world excavator battle.
⏱️ Timestamps
00:00 – Intro: Cat 336 vs Komatsu PC360 00:55 – Brand Legacy & Philosophy (Cat vs Komatsu) 02:03 – Power & Hydraulics (Horsepower vs Breakout Force) 03:27 – Digging Depth, Reach & Lifting Capacity 05:02 – Fuel Efficiency & Operating Costs 06:55 – Technology Showdown (Cat Grade vs Komatsu iMC 2.0) 08:58 – Price, Repairs & Total Cost of Ownership 10:37 – Operator Comfort & Reliability 11:56 – Final Verdict: Which Excavator Wins?
What You’ll Learn Caterpillar 336 specs and performance Komatsu PC360 breakout force and efficiency Excavator fuel consumption comparison Cat Smart Mode vs Komatsu Economy Mode Intelligent Machine Control (iMC 2.0) explained Real-world excavator ownership costs Which excavator is best for construction, mining, and heavy jobs Key Differences
🟡 Caterpillar 336
More horsepower (up to 311 HP) Advanced tech (Cat Grade, Payload, E-Fence) Stronger lifting performance Built for maximum production
🔵 Komatsu PC360
Higher breakout force (up to 51,000+ lbf) Excellent fuel efficiency Ultra-quiet, operator-friendly cab Lower initial purchase cost The Big Question
Do you choose: 💪 Raw power and productivity (Cat 336) OR 🧠 Efficiency, precision, and comfort (Komatsu PC360)
Caterpillar 336 versus Komatsu PC 360,
the ultimate excavator comparison.
Walk on to any major job site
and you'll see two names
that rule the world of earth moving,
Caterpillar and Komatsu.
For decades, these giants have been in a constant battle
for the top spot, pushing what's possible
in power, tech and efficiency.
But when you put their top 35 ton excavators,
the Cat 336 and the Komatsu PC 360 side by side,
which one really comes out on top?
Picking the wrong machine can set you back thousands
in fuel, repairs and lost time.
A mistake that big can make or break a project.
So today we're going to dig deep into the specs,
the technology and the real world performance
of these two machines.
We're running them through a series of tests
from raw power and digging force
to smart tech and operator comfort
to see if we can crown a champion.
This is the ultimate showdown.
Section one, the tail of the tape,
a legacy of two giants.
Before we get these machines dirty,
it's worth understanding the ideas
that drive these two companies.
Caterpillar, an American icon,
was officially formed in 1925
through a merger of two earlier companies,
the Holt Manufacturing Company and CL Best Tractor Company.
Cat built its reputation on unmatched durability
and pure brute force.
Their machines are known for being tough as nails,
earning them a gold standard reputation
for reliability everywhere.
The brand is all about power
and a global parts network that's second to none.
Komatsu, founded in Japan in 1921,
took a slightly different route.
While they also build incredibly tough machines,
Komatsu has always been a trailblazer
in innovation and efficiency.
They're famous for their advanced hydraulics
and for being early adopters of electronic controls,
often striking a balance between power and precision.
These different approaches are baked right into the DNA
of the machines we're comparing.
The Cat 3-3-6 channels,
the brand's focus on raw, productive power,
while the Komatsu PC 360 reflects a commitment
to high-tech efficiency
in a design that puts the operator first.
Section two, power and guts.
All right, let's get to the good stuff,
the engine and hydraulics.
This is where the fight for job site dominance
really kicks off.
The Caterpillar 3-3-6, especially the next-gen models,
starts with a significant power advantage.
Depending on the exact model,
its engine can put out anywhere from about 225
to an impressive 311 horsepower.
That raw power is built for one thing,
getting the job done in the toughest conditions.
If you're ripping through rock
or moving tons of heavy material,
that extra horsepower gives you a clear advantage.
But don't write off the Komatsu PC 360.
Its engine delivers a solid 257 horsepower.
Where Komatsu pushes back
is in the details of its hydraulic force.
The PC 360 often has a higher bucket breakout force,
sometimes listed as high as 51,150 pounds force.
It can also have a slight edge in dipper tear-out force.
This means while the Cat might have more engine grunt,
the Komatsu is engineered to apply its power
with incredible precision right at the bucket,
giving it an edge when prying out stubborn material.
So who takes this round?
It's a split decision.
For sheer engine power
that can tear through just about anything,
the Cat 3-3-6 wears the crown.
But for optimized breakout force,
where the work gets done,
the PC 360 proves it's not just about engine size,
but how you use that power.
Section three, digging deep and reaching far.
An excavator is only as good
as its ability to dig, lift, and load.
Here, we're looking at reach, depth, and lifting capacity.
Dimensionally, these machines are incredibly similar,
which shows you just how fierce
the competition is in this class.
The Caterpillar 3-3-6 with a monoboom
has a maximum digging depth
of around 21 feet and two inches.
The Komatsu PC 360 can sometimes dig a little deeper,
reaching down to 21 feet and five inches.
Now, three inches might not sound like a lot,
but on a deep utility job,
it can be the difference between hitting your grade
in one shot or having to readjust.
Komatsu also tends to have a slight advantage in reach.
For jobs where you're clearing a wide area
or loading trucks without constantly moving the machine,
the PC 360's design can give you
that extra bit of range you need.
However, when it's time to lift,
CAT's power advantage makes a comeback.
The next-gen 3-3-6 uses an advanced
electrohydraulic system that not only helps
with fuel efficiency,
but also seriously boosts its lifting power.
For operators setting heavy pipes,
trench boxes, or big precast structures,
the CAT 3-3-6's superior lifting capacity is a huge plus,
making those heavy lifts safer and more stable.
This round is another close one.
The Komatsu PC 360 has a slight edge
in digging depth and reach,
making it a master of versatility.
But for heavy lifting,
the Caterpillar 3-3-6 flexes its muscles.
The winner here really comes down to what you do most.
Section four, the fuel efficiency fight.
With fuel prices always a concern,
efficiency isn't just a nice-to-have,
it's critical for your bottom line.
Both CAT and Komatsu have poured billions
into making these 35-ton machines
as fuel-efficient as possible.
When working hard,
both excavators burn fuel at a similar rate,
often somewhere between 18 and 22 liters per hour.
The real difference is how their smart tech
helps save every drop.
Caterpillar's next-gen 3-3-6 has a smart mode
that automatically adjusts the engine and hydraulic power
to match what you're digging.
It senses when you don't need full power
and lowers the engine speed automatically.
This system can cut fuel use by up to 15%
without the operator touching a thing.
It's a set-it-and-forget-it feature
designed to balance power and efficiency.
Komatsu has been a leader in fuel-saving tech for years
with its famous Economy Mode.
This, combined with highly efficient pumps
and a smart load-sensing system,
is engineered to prevent wasted fuel.
Komatsu's approach focuses on total system harmony,
making sure the engine, pumps, and valves
work together perfectly to lower fuel consumption,
with some claims of 15 to 20% savings.
So which is better?
Real-world feedback often suggests the Komatsu PC360
might have a slight edge on lighter, more varied jobs
where its Economy Mode can really work its magic.
However, for non-stop, heavy-duty work,
the CAT 3-3-6's smart mode is incredibly effective
at giving you power when you need it
and saving fuel when you don't.
This round is a draw,
with both machines offering amazing technology
that helps tackle one of the biggest costs
for any equipment owner.
We're about to get into the technology
that really separates these machines,
the brains behind the Braun.
But before we do, if you're finding this useful,
do us a favor and hit that subscribe button.
We're all about bringing you
the best heavy equipment analysis,
and your support helps us keep making these videos.
Section five, the technology showdown.
This is where we move beyond just steel and hydraulics.
In 2026, it's not just about horsepower.
It's about smart tech
that makes operators better and faster.
Caterpillar has gone all in,
making the 3-3-6 a productivity machine
right from the factory.
The CAT Next Gen series comes standard
with a whole suite of tools
that can boost efficiency by up to 45%.
This includes CAT Grade with 2D,
giving operators on-screen guidance for depth and slope,
with easy upgrades to full 3D GPS.
Grade Assist, which automates boom,
stick, and bucket movements,
so even newer operators
can hit their target grade every time.
CAT Payload, an onboard scale
that gives real-time feedback
to prevent over- or under-loading trucks,
taking the guesswork out of hauling.
And E-Fence, which keeps the machine
from moving outside of preset safety boundaries,
a game changer when working near traffic
or other structures.
This whole integrated system
is like having a co-pilot in the cab,
cutting down on rework
and saving a massive amount of time and fuel.
Komatsu's answer is its own revolutionary system,
Intelligent Machine Control, or IMC.
The latest version, IMC 2.0,
is a highly advanced factory-integrated
grade control system
that includes features like Auto Tilt Control
and Bucket Angle Hold
to automate tricky finishing work.
One of its best features is the Auto Stop Control,
which automatically stops the bucket
right on the design surface,
making over-digging a thing of the past.
Komatsu's tech is designed to be intuitive,
helping operators of any skill level
do high-precision work with confidence.
This round is really a clash of ideas.
CAT gives you a wide range of standard features
that improve the entire workflow.
Komatsu's IMC 2.0 offers a deeply integrated
and automated grading solution
that is incredibly precise.
For the sheer number of standard,
factory-installed features
that impact everything from digging to loading,
the win for this round goes to the Caterpillar 336.
Section six, the price tag and long-term costs.
Power and tech are great,
but the numbers have to make sense.
Let's talk about the cost of getting
into one of these machines and keeping it running.
For purchase price, the Caterpillar 336
typically ranges from $180,000 to $300,000,
reflecting its premium features and powerful build.
The Komatsu PC360 can often be found for less,
with used prices ranging from approximately $80,000
to just under $200,000.
This potentially lower entry cost
makes the Komatsu an attractive option
for those closely watching their initial investment.
But the sticker price is just the beginning.
Major repairs are a fact of life.
For both machines, a full engine overhaul
will generally run between $8,000 and $20,000.
A complete replacement engine for the Komatsu
could cost between $30,000 and $60,000.
The undercarriage is another huge expense
for any track machine,
and you can expect to pay anywhere from $5,000 to $15,000
for a replacement on either excavator.
Standard hydraulic fixes are similar for both,
costing between $800 and $2,500.
However, a catastrophic failure is another story.
A total system contamination in the cat
could lead to claims over $200,000,
while major downtime on the Komatsu
can cost a company $500 to $1,000 per hour
in lost productivity.
In this round, the Komatsu PC360
takes the win for its lower initial purchase price,
but it's clear that long-term running costs
for both of these heavyweights are a serious consideration.
Section seven, the operator's domain and durability.
A tired operator is an unproductive operator.
So for this final round, we're stepping into the cab
and looking at long-term durability.
Both machines have incredible cabs
with heated air suspension seats,
big touchscreen monitors, and great visibility.
Caterpillar's next-gen cabs
have really cut down on vibration and noise,
making it a comfortable office for a long day.
However, Komatsu is often praised
for having one of the quietest cabs in the industry.
This is partly thanks to a centrally mounted engine
and fantastic sound insulation.
When you're spending 10 or 12 hours in the seat,
that reduction in noise can make a huge difference
in how you feel at the end of the day.
When it comes to maintenance,
both brands have made it easier.
Caterpillar claims its next-gen excavators
can reduce maintenance costs by up to 15 to 20%
because of longer, more synchronized service intervals
and fewer hydraulic lines.
Komatsu is also legendary for its reliability
and easy-to-access service points,
all designed to keep downtime to a minimum.
This round is tough to call.
Komatsu often gets the nod for its ultra-quiet cab
and reputation for reliability.
Caterpillar scores major points
for its reduced maintenance schedule
and world-class parts availability.
For the operator-focused comfort
that makes a real difference day in and day out,
we'll give a slight edge to the Komatsu PC360.
Conclusion.
So, after all that,
which excavator is the king of the job site?
The honest answer is,
it depends entirely on what your business needs.
Let's break it down one last time.
The Caterpillar 336 is the champion of raw power
and built-in productivity tech.
Its impressive horsepower and standard features
like payload and great assist
are all about maximizing production.
Though this often comes with a higher initial price tag,
the Komatsu PC360 is the master of refinement,
fuel efficiency, and operator comfort.
Its smooth hydraulics, excellent fuel economy,
and incredibly quiet cab make it perfect for long hours,
and it can be a more budget-friendly initial purchase.
Here's our final take.
If your business is all about aggressive production,
moving huge amounts of material,
and using the best standard tech
to make your whole crew more efficient,
the Caterpillar 336 is your machine.
It's a smart powerhouse built to dominate,
but if you're focused on a lower initial investment,
long-term fuel savings,
and want to keep your operators comfortable
and sharp on long shifts,
then the Komatsu PC360 is an incredible choice.
It's a finely-tuned machine
built for smart, sustainable work.
Ultimately, you can't go wrong with either one.
They are both phenomenal machines,
but we want to hear from you.
Which one would you put in your fleet and why?
Drop a comment below and let us know.
Your real-world experience is what matters most.
And if you love heavy equipment,
be sure to subscribe and ring the bell
so you don't miss our next showdown.
Thanks for watching, and we'll see you on the next one.