You’ll NEVER Guess These High-End DIY Decor Pieces Are from the Dollar Tree! Do you want high end home decor but don't want to spend the high price? Today we’re making high-end decor from Dollar tree items. We'll DIY a shadowbox frame, a decorative riser, and a stunning flower arrangement. I know you'll get plenty of DIY home decor inspiration!
Disclosure: This video may contain affiliate links. When you purchase an item via these links I receive a small commission at no extra cost to you. Thank you so much for your support!
Let's see what we can use from the Dollar Tree to make some high-end decor today.
And here's the secret. Everything turned out amazing.
If you are skipping the frame section at the Dollar Tree, then you are completely missing out.
They have a huge variety of frames there in different sizes and shapes and colors.
And even though the Dollar Tree keeps raising their prices, their frames tend to stay the
same, which is fantastic, especially for this project that we are going to do.
I need two frames, so I picked up two 8x10 frames.
These frames are white and they have a gold edge around the inside and the outside.
I love the white and gold color combination.
And we're going to use these two frames to create a shadow box.
But in order to create a shadow box, we've got to have a space in between the frames.
Well, another item that I think is overlooked a lot of times at the Dollar Tree are their
wood beaded garlands.
I picked up two of these garlands.
They are so versatile.
They are a great size.
And I love that they are neutral, so you can take them in any direction that you want.
And another thing that I really love is that they're already strung together,
so we don't have beads all over the place.
And that's going to come in very handy for our shadow box.
Now, what we need to do with these beads is change the color.
So what I'm going to do is take them outside and spray them in some gold Rust-A-Ling spray paint.
I laid them out flat and I painted the tops and the sides of both of these beaded garlands.
Once both of the garlands had been saturated in the spray paint, I let them dry for 30 minutes.
Then I came back, flipped them over, and painted the opposite side of these square beads
in the spray paint.
Once everything had been coated in the gold spray paint, I let these garlands dry for one hour.
While the paint is drying, let's talk about what we're going to put inside of our shadow box.
This is where you can get so creative.
Now, I love flowers.
And I had seen some in the scrapbook section at Hobby Lobby.
And so I headed over there and I picked up a package of these paper flowers.
There's some gorgeous leaves and a variety of different flowers
in different shades of creams and browns and golds.
They are going to be perfect to display inside of our shadow box.
And they were 40% off, so they were a great price.
So these are going to be our 3D elements inside of our shadow box.
But now we need to create a backdrop for our flowers.
And one aisle over at Hobby Lobby is their scrapbook page section.
And I found this gorgeous vellum paper that has some gold flowers on it.
And the design is very subtle, so it's not going to fight with the flowers
that we're going to put on top.
And this sheet was only $0.99, so that's a great price.
Another one of my favorite Dollar Tree items that I use all the time are their wallpaper.
They have such a huge variety of different size and shape wallpaper.
And I actually found some borders there.
And so I picked up some leaves.
These leaf stickers are going to be perfect for our project because of the size.
They're quite large, which is going to look great on our backdrop.
And the color of these leaves.
There are some greens, and there's some pattern shapes.
There is some gold ones.
And all these colors are going to coordinate with our flowers and the vellum paper that we have.
And the thing about the wallpaper as well as the frames
is that they have not changed their prices on these either.
And they're still $1.25, so yay for the wallpaper.
Now that we have everything, we are going to assemble it
by removing the back of the frame and placing everything on top of that.
I'm going to take some white plain copy paper
and add a dab of hot glue to each of the four corners on the back of the frame.
Then I'm going to take my white copy paper and press it into the hot glue.
On top of the white copy paper,
we're going to take our pretty floral vellum paper and place that over the top.
So once again, I'm going to get some hot glue and add a dab of hot glue to each of the four corners.
Take my vellum paper and place it into the hot glue.
It's sticker time.
So we're going to get these stickers and just peel them away from the backing.
I placed them in various areas on top of the vellum paper.
I also wanted the stems and leaves to look like they are growing out of the ground.
So we're placing them on the paper accordingly.
I love the variety of different colors and shaped leaves that we have.
And the contrast of the navy blue is fabulous against the white and the gold.
In the past, I've talked about how you can use stickers as a substitute
for a vinyl cutout because I use my Cricut Maker a lot.
And if you don't have one, this is a fantastic alternative to a Cricut Maker.
These stickers work beautifully.
So you can definitely substitute a vinyl cutout for a Dollar Tree sticker.
OK, so now let's move on to our 3D flowers.
I laid everything out first, the flowers and the leaves.
That way, I had a template in mind of where everything was going to be placed.
Then I got some hot glue and added hot glue to the back of the flowers and leaves.
And because we laid out everything previously, this part is a breeze.
All we need to do is add hot glue to the back of each of the botanicals
and press them firmly into their predetermined location.
I'm making sure that my 3D shadow box is full of flowers.
I'm going to be adding all of the flowers and leaves that came in the scrapbook package.
This process went by super fast.
And now I have a beautiful display of flowers to go inside of my shadow box.
The paint on my beaded garland is now dry.
So we can add that to the frame.
I'm going to just get some hot glue, add the hot glue to the center of the frame,
take my beaded garland, and press it into the hot glue.
One thing I love about having this beaded garland on a string
is that it is easy to just lay it out on the frame.
So I'm just going to add some hot glue down the center of the frame
and just take my beads and press them into the hot glue.
I don't have to place the beads into the frame individually.
Everything is straight and professional looking.
Once I got down to the bottom of the first side,
I cut the string, hot glued the final bead in place,
and then moved on to another side of the frame.
I'm going to repeat this process of hot gluing the beads to the center of the frame.
Once my first beaded garland had been hot glued into the frame,
I got my second beaded garland and hot glued that to the center of the frame.
Once again, I'm going to cut the string at the corners.
That way we have a sharp turn on the corners.
And finally, I hot glued my last string of beads to the frame.
And I did need to hot glue a couple of beads individually at the very end.
And I actually had one teeny tiny little bead left over.
So if you're going to do this project on an 8x10 frame,
you're definitely going to need two beaded garlands
because this is all I got left over.
I was so lucky.
Now we do have one teeny tiny little problem.
We have an exposed edge on the side that we cut.
You can look at that like on the frame
because the beads were stacked up against each other when I spray painted them gold.
So we have a white side.
We cannot do that.
That would look so bad.
So what I'm going to do is get some gold leaf rub and buff and a tissue,
and I wiped it on the unpainted side of the bead.
I repeated this process on all four of the exposed beads on each corner.
And then I let the rub and buff dry for five minutes.
Now it is assembly time.
I'm going to take my 3D flowers and place them back into the first frame.
I am not going to add the glass to this frame.
I'm going to leave it out.
If we put the glass in, it would smash our flowers
and completely defeat the point of making a shadow box.
Then I'm going to add some hot glue to the top of the beads.
I made sure that each wood bead had some hot glue on top of it.
Then I took the top frame and I am leaving the glass in this frame.
I pushed the frame and the beads together firmly so that the frame adhered well to the beads.
And now I can just prop my little shadow box frame right up.
And look at how cute this is.
I am so amazed that we were able to create a shadow box out of two Dollar Tree frames,
two wood beaded garlands, and a couple of beautiful flowers that we put inside.
This is such a fantastic project to do.
And it is so unique because you can pick whatever you want to go inside of your shadow box.
You can use some pretty little keepsakes.
You could display some really fancy jewelry.
The choice is yours.
You could go in so many different directions.
I love the flowers that are inside of mine.
And this is also so great to use as a seasonal piece of decor
because you can change out what's inside for the different seasons.
And shadow box frames can get pretty expensive,
but we were able to create ours so affordably.
And I actually really love the way that the edges look on our shadow box.
It is certainly something that I have never seen before.
And it definitely takes our design over the top.
And if you had something even thicker to put in your shadow box frame,
you could do two rows of these beads as well.
Well, I think that this turned out pretty good for project number one.
We're going to try and beat it with project number two.
Do you think we can?
Let's find out.
We are going to be using a 10 by 10 canvas for our next Dollar Tree DIY.
They have a huge variety of canvases at the Dollar Tree.
They come in such a variety of different sizes.
And they have not raised the price on this one yet.
So we're starting off with a great price.
So what we're going to do with this, believe it or not, is turn it into a riser.
But our problem is that the canvas is flimsy, right?
If we put something on top, it would kind of sink and kind of droop a little bit.
So we need to get something sturdy to put over the top.
So I thought about it for a while.
And I rummaged through my scrap of paper.
And I actually found a book of chipboard that had a bunch of different designs on it.
This is from Cricut.
But you can get chipboard at your local craft store.
It's super thin.
You can see how thin that is.
But it is pretty sturdy.
It's much sturdier than the canvas.
So we are going to place this over the top of the canvas.
I love the design that's on this chipboard.
It's a damask design.
And it is very classic and very timeless.
So the problem with this chipboard and this canvas is that it is too big.
You can see we've got a 10 by 10 inch canvas.
And we have an 11 by 11 inch chipboard.
So we've got to cut it.
We want to make sure that our design is in the center of the canvas.
So what I'm going to do is take a half an inch off of each side.
So I'm going to get out my self-healing mat and a ruler.
And I traced out the size that I needed.
Because this chipboard is so thin, I can actually cut it with an exacto knife.
So I'm just going to score it several times along the line that I drew.
I needed to score it about 8 to 10 times along the pencil mark in order to cut it to size.
Once I was finished with my first side, I repeated the process on the other three sides
by scoring the chipboard with the exacto knife.
And removing the excess half inch off of each of the four sides.
Now I have a chipboard that is the exact size that will fit right over the top of my canvas.
This chipboard is actually very porous.
And I want to be able to use this riser to put items on it that possibly could spill.
And so I want to protect this chipboard.
And the way I'm going to seal it is by using some Mod Podge.
So I got some dishwasher safe Mod Podge and a sponge brush out.
And I'm just going to paint on a thin layer of this Mod Podge over the surface of my chipboard.
I made sure that the entire surface of the chipboard was covered in the Mod Podge.
If you didn't mind that the surface wasn't water resistant, you could skip this part.
But I really thought it was important to do.
So once the chipboard had been covered in the dishwasher safe Mod Podge,
I let it dry for three hours.
So now I'm going to adhere the chipboard to my canvas with some hot glue.
So I just added a whole bunch of hot glue to the surface of the canvas.
I added the glue along the sides and in the middle.
And then I took my chipboard square, aligned it to the top of the canvas,
and pressed the two pieces together.
I pressed firmly so that they adhered well.
And now we have a sturdier and more beautiful surface for our decorative riser.
In order to rise it up and actually make it a riser, we need some feet.
I have these beautiful knobs that I purchased at Hobby Lobby.
And they have some white marble and some gold trim around them.
I think that they are stunning.
And these are going to be perfect feet for our riser.
And all I need to do is just flip my canvas over and add hot glue to each of the four corners.
And then take my knobs and press them into the hot glue.
I repeated this process on all four corners of my canvas.
Adding a high-end material like marble makes our riser look timeless and high-end.
I also love that we now have added a touch of gold as well.
We are making some great progress on our riser.
But as I looked at it, I just really did not like that exposed edge
around the canvas where it's white.
I just, it just didn't look right.
So we need to cover it up with something.
And that something is some metal trim from Hobby Lobby.
I've used this before.
I absolutely love it.
It has a beautiful 3D raised design.
And the only thing that we need to do is paint it
because the silver is not going to go with our design.
So I took it outside and I placed it on top of some cardboard.
And this time I'm going to be spray painting it in some white Rust-Oleum spray paint.
I painted the underside first.
Once it was coated in the spray paint, I let it dry for about half an hour.
Then I came back and I flipped it over and I painted the top side of this metal trim.
I made sure it was completely covered in the white spray paint.
Once it was, I let it dry for an additional hour.
If you like DIY home decor, room transformations,
thrift flips, and so much more, then you have come to the right channel.
I post new weekly videos.
So make sure you subscribe so you can get your weekly dose of home decor inspiration.
This trim is very white and we need to tone that down just a little bit.
And I also want to add some gold to the trim
so that it coordinates with the gold that we have on the feet.
And the way that we're going to do that is by using some gold leaf Rub-N-Buff.
I'm actually going to dry brush a thin layer of this Rub-N-Buff over the surface of our metal trim.
So I got a paper towel and I squeezed a little dab of the Rub-N-Buff onto the paper towel.
And then I got a paintbrush and I dipped it into the gold Rub-N-Buff
and just kind of wiped it off a little bit.
And then I took it and I brushed it gently and softly over the surface of the metal trim.
We don't want to cover everything up.
We just want to highlight those raised details on the trim.
I continue to dip the paintbrush into the Rub-N-Buff and lightly brush it onto the metal trim.
I did this along the entire length of this segment.
And then I let it dry for about five minutes.
The gold leaf Rub-N-Buff highlights the design on the metal trim and tones down the bright white color.
So now we are going to hot glue this trim to the exposed area on the canvas.
So I added some hot glue to the side of the canvas.
And then took my metal trim and pressed it into the hot glue.
I continue to add a line of hot glue down the edge of the canvas.
And then press the metal trim into the hot glue.
Once I got to the corner, I bent the trim and moved right along to the next side.
I'm simply adding hot glue to each of the sides and pressing the metal trim into the hot glue.
I pre-cut this trim to the exact size I needed.
So once I got back to the beginning, it was a perfect fit.
And I was able to add the last little bit of hot glue to the canvas and press the trim in place.
This trim finishes off the edge of my canvas.
It adds an additional detail with the raised design on the metal trim.
And of course, it adds additional color with the white and touches of gold
that tie in with the gold and the white on the feet.
And we're finished!
We are completely done creating our Dollar Tree canvas turned high-end riser.
What do you think about this?
This turned out so much better than I had hoped for.
This is going to be perfect for my decor.
I can take some decorative accessories and place this on top.
I can put a candle in the center.
And because it has a neutral and timeless design,
it will be able to go with any season, any decor style.
So this is a fantastic neutral piece that I can use all year long.
I really love this metal trim on the side.
I really think it finishes it off.
Sometimes if you leave edges exposed, it definitely depreciates the look of your items.
And so finishing it off professionally really does make it look so much more expensive.
We were able to take something like a canvas
and reconfigure it into a beautiful home decor piece that is unexpected, yet oh so stunning.
We're making some good progress.
We've got our shadow box and now we have our riser.
Do you think we can beat it with project number three?
Let's try.
What we're going to be using for this project is some more of those wallpaper borders.
I found some stunning floral wallpaper borders in the same pile as our sticker leaves.
These flowers are so vibrant.
They have shades of pink.
They've got shades of green with all the leaves.
They are so cheerful and they are going to be perfect for spring and summer.
So I picked up two of these wallpaper borders.
The next thing that we need is a box.
Any box will do.
If you have a box hanging around your house, you can use that.
They have plenty of boxes in the gift section of the Dollar Tree.
I actually have a box that I picked up at Hobby Lobby a year or so ago
and it's the perfect size for this project.
It was $2.99, so it was a great price.
This is the box that we are going to use.
What I'm going to do is take my wallpaper border and I'm going to place it on my box.
So I just peeled the border away from the backing and pressed it to the box.
One thing I love about these decals is they are not permanently in place.
If you don't like where it's positioned,
you can lift it back up without it ripping or tearing the surface
because for me, I never get it right on the first try.
I've always got to peel it back up and then press it back down
and it's also very convenient because you can get air bubbles out that way as well.
So I just continued to add these wallpaper borders to the box.
I pressed it firmly to the surface.
I continued to add the stickers to each side of my box.
Once the first wallpaper border was in place,
I realized that I did not have enough to go around the circumference of the box.
So I cut a segment of the second piece of wallpaper border
to the size that would fit in that vacant space on my box
and I pressed it to the box.
So now each side of my box has a wallpaper border.
This wallpaper border has immediately improved the cheerfulness of this box.
Now we can't leave the lid plain,
but I don't want to add this vibrant flower design to the top of the lid.
I did have one little leaf sticker left over from our previous project.
So what I did was I just peeled that away from the backing
and pressed it firmly to the lid of the box at a diagonal.
This leaf is the perfect design for the lid.
It adds a much-needed design, but it doesn't overpower the lid.
Just like our riser, we have some exposed edges on our box and lid
that need to be covered up because I don't like looking at raw edges.
So I'm going to cover that up with some ribbon.
This ribbon is stunning.
It is black and gold and has a gorgeous floral and leaf design.
I purchased this ribbon on Amazon for a couple of bucks and it's really thick.
So it's going to stay in place beautifully.
So what I'm going to do is get some hot glue.
I add a dab of hot glue to the box.
Then I took my ribbon and placed it into the hot glue.
I ran a line of hot glue along the top of the border
and pressed the ribbon into the hot glue.
I continued to add a line of hot glue right above the wallpaper border
and pressed my gorgeous ribbon into the hot glue.
I went around the perimeter of the box.
Once I got back to the beginning, I added one final dab of hot glue
and now I have a stunning border around the top of the box.
The reason why I added the ribbon to the top of the border
was because I wanted to cover up that seam from where the border met the box.
But also if I added this ribbon to the absolute top of the box,
you would not be able to see that in just a minute when we add our items to the box.
So this ribbon is exactly where we want it to be.
Now we've got to add some ribbon to the lid as well
and I'm just going to repeat the same process of adding hot glue to the lid of the box,
pressing the ribbon into the hot glue
and then continuing to run a line of hot glue and ribbon around the perimeter of the lid.
The ribbon is the perfect size for the edge of the lid.
It covers it up beautifully.
It's like they were made to go together.
Once I got back to the starting point, I hot glued the end of the ribbon to the box
and now I've got a beautiful border around the lid of the box.
This ribbon ties together all of the colors beautifully.
It also adds a design detail that enhances the uniqueness of our box and lid.
We are going to turn our lid into a pick.
The reason why we're doing that is because we do not want it to slide around
in just a minute when we add some flowers to our box
because if I just popped that lid right on top of the flowers, they would slide off
and we need them to stay in place.
So I got a wooden skewer.
It was too long so I broke off a small segment at the end of the skewer.
I flipped my lid upside down.
I added a fairly decent amount of hot glue to the center of the lid
and placed the end of the wooden skewer into the hot glue.
I held it there for a minute or so.
That way the hot glue could cool down and solidify.
Now you can see that I have turned the lid into a pick.
Now it's time to gather up all kinds of pretty pink flowers.
I've got some flowers in light pinks and dark pinks.
I've got peonies and tulips and I'm going to add these to my box.
I'm going to take my first stem of flowers.
I'm going to bend the stem and place it inside of my box.
I continue to add the remaining bunches of flowers into the box.
You can see that I'm placing them at an angle.
Now that my flowers are in place, I can take the lid pick
and place it over the top of the flowers at an angle as well.
And since we added the skewer to the lid, it's not going to slide down.
It will stay in place.
Okie dokie, we are done.
You guys, look at this pretty little flower arrangement.
I don't typically make flower arrangements inside of boxes,
especially at an angle where the flowers are bursting out of one side and put the lid back on.
But I thought this was such a fun way to create a one-of-a-kind flower arrangement.
Now look at the box, you guys.
The box itself is just so beautiful with this wallpaper border around it
and it definitely coordinates with the flowers that we have inside.
Those pinks match just perfectly as well as the green leaves.
Those vibrant reds and pinks are perfect for spring and summer.
And you can now see why I added the ribbon right here along the border
because you can see it.
If I were going to add it up a little bit higher, the flowers would completely block it.
And I love that we have the coordinating ribbon right along the edge of the lid.
And look at our gorgeous gold leaf on the lid.
We definitely needed something on here, but we didn't want it to be so busy
because we've got a lot of design going on everywhere else on this flower arrangement.
And you can make this so affordably.
Just get a box that you have at home.
Get a decal from the Dollar Tree and you don't have to buy any more flowers either.
If you've got flowers at home, just use those.
This is such an easy and affordable way to get a very custom piece of home decor
that fits in with any season that you want it to.
How cute would this be at Christmas time?
You could wrap it in some wrapping paper and add some poinsettias to it.
That would be adorable.
So you can take this flower arrangement in a variety of different directions.
I've got my three Dollar Tree projects that we did today.
Out of the three, which was your favorite?
The shadow box with the flowers in it,
the canvas riser, or the wallpaper box flower arrangement.
It's still a toss-up for me.
I've got to look at them and decide,
but I think that all three of them turned out so much better than I had ever anticipated.
And because we were able to use items from the Dollar Tree,
we could create these very affordably,
which proves that you can live beautifully,
you can do it throughout the year,
and you can definitely do it on a budget.
I love creating home decor that is affordable,
but doesn't look like it's affordable.
That's the best part, is trying to take something that's very inexpensive
and make it look expensive.
So hopefully you got some inspiration or some ideas today
so that you can head on over to the Dollar Tree,
grab some plain, mundane items, and create something beautiful.
I've got some really fun home decor projects coming up,
so make sure that you are subscribed so you won't miss out on those.
And then I also have some very special guests flying in to see me today,
and they're going to be on my video next week,
so make sure you tune back in next Thursday
to see who's coming to visit me,
and I'm going to put them to work.
So we'll see.
Well, I appreciate you stopping by today.
Once again, I hope you got some inspiration.
Thank you so much for watching.