Giant Acorns and Trees by Sculpture Studios

Skillful Hands
120 followers
12 Video Views·Apr 8, 2026
Welcome to Sculpture Studios. Creating some interactive pieces here for a school up in
Lincoln. The Hartsholm Academy is a primary school that's a pioneer in a different style
of learning. If you were to visit, as we were asked to do, you'd find very few school chairs
or writing desks or much furniture at all that you would usually consider to be the
norm in a children's classroom. It's unlike any institute that I've ever been in, with each room
having a different theme, a different feel and a variety of objects for the children to immerse
themselves with. For this project we've been asked by teacher Amy Smith to create some large trees
to adorn the entrance to one of the larger school rooms. In addition to these trees we're going to
be making some acorn pods for small children to sit inside. It was useful to visit the site where
the trees would be situated as we needed to evaluate where the sculptures would fix to the
and anything that exists on the wall already that we'd need to work around.
Starting with the acorns, unfortunately we couldn't find a tree with acorns big enough for
us to hollow out, so we're just going to have to create our own from scratch. Our large block of
polystyrene is first hot wire cut down to size and an outline template of the acorn is being used
around the clock to create a rough form. This is being carved by hand for that organic look,
using wire brushes, stone mason rifflers and sandpapers to smoothen the shape down.
Here Jess is going over with a water-based plaster filler. We get a lot of questions
about this product. It's a household plaster filler that you can probably buy from home
construction stores like we do in large tubs. You apply this on quite thin and it air dries
and you can sand this back for a smoother finish. For us it's the perfect way to lose that
polystyrene bead texture in order to prepare this for a mould. No, it's not particularly
strong to reinforce the sculpture with, it's more for aesthetics and so is this.
So
the plaster filler is sanded back and reapplied where we need to do a little more work
and the entrance to the acorn is being carved out. To save unnecessary cost for the client,
we're not going to be creating an internal mould so we don't need to hollow the whole shape out
and we're only cutting it in by a few inches. We're going over with a water-based paint and
a filler mix for its final finish before moulding and by going with the grain lines that have already
been created the brush strokes simply add to the acorn effect. Once the plaster and paint has dried
we go over with a PVA blue release agent before going over with glass fibre and resin to create
the mould. The mould has been made in several sections so that we can extract the cast easily
and these mould walls can all be bolted together. Once this has been created we extract the
polystyrene pattern and we proceed to clean up the interior of the mould. What we're doing is
improving the final outcome finish of the job during every step of the process. Once again,
we go over with a PVA blue release agent and that's the blue you can see on the glass fibre
here and as this is an inside installation and we'll have a captive audience this needs to be
fire rated so for this job we're using a class o rated resin. All the pieces are trimmed nice and
neat removing any excess material and these are then joined together on the inside with more glass
fibre. The seam lines then need to be clinged up so the acorn looks like a completely sealed
single unit. This whole process is then repeated so that we end up with two identical fibre glass
casts. When the acorns are sanded and ready for painting we go over with a grey primer and then
colour over the top. As the kids are bound to be touching these and climbing in and out for this
job we're using 2k car body paints for a nice strong finish. At this point we're only going
over with dusty layers as this is just a base layer for the airbrush work going on top. Here
we have Gary working on the detail creating a more natural finish and working with the existing grain
lines. As a little bonus for Amy and the children at the school we've also created these little
mushroom stools. Made in a similar fashion from a mould and airbrush detail these should look great
alongside the other wooden theming. With the inside of the acorns being raw fibre glass we've made sure
to sand the complete interior down so there are no sharp points. As the kids are going to be climbing
in and out of these, these need to be safe to handle and safe for them to touch and lean against
so we've gone inside with a flow coat of resin for a much smoother finish.
We've also, oh wait a minute, what's Aiden doing here? We know you've been working on
something else while the acorn making has been going on so let's go and take a look.
Aiden's begun work on the two half trees that are going to stand either side of the corridor.
They need to leave enough room for a walkway in between them so they're only going to be
half trees that are flat against the wall. The canopy above on the other hand needs to be nice
and full so these will need to be busy and overlap one another. Aiden's carving two similar
trees from polystyrene using hot wire cutters to get rid of the bulk and going to work with
nail and wire brushes to add detail to the tree trunk. This will all be covered in a secretly
sore sticky back tinfoil as a protective barrier and once again class o resin for fire rating.
All the branches are being cut out and carved and adhered onto the rest of the tree body
using a PU expanding foam. To make sure these trees are nice and strong we're putting some
metal armature into the branches. This is so that they can withstand a bit of manipulation
if the children get a little too grabby when the trees are on location. As these are presumably
going to be touched far less than the acorns we're using emulsion paints for this and we're
going over the detail that we've created in a dry concrete mix. As well as installing all the
smaller branches by drilling holes and using a PU foam once again we're adding some metal work to
the back of the trees so they can be fixed securely to the wall and there's no movement
whatsoever. We've ordered about 2,000 fake leaves to add as foliage at the top but after seeing how
much coverage this provides or how much little coverage it provides over such a large area
we've decided to order another 2,000 more. We've gone for coloured autumn leaves for the second
batch just to give a bit more vibrancy to the sculptures. Here are the acorns arriving on site
proudly being modelled by one of the older children at the school so it's safe to say
that anyone younger and presumably smaller will fit quite comfortably. We'd like to thank Amy Smith
for finding us online and approaching us with the project and we feel privileged that our work has
helped to add to this flagship of a school and we welcome any future projects. We hope the children
at the Heartsholm Academy enjoy their new scenery and more importantly learn from watching this
video that sculptures don't simply grow on trees. Bit of acorn-y joke for you and I'm gonna leave it
there as there isn't much room for any more. Please feel free to leave any comments below
as they're always appreciated and hit the subscribe button for our latest videos.
You can like Sculpture Studios on Facebook and follow at Aidan Hines on Twitter and for more of
our work visit SculptureStudios.co.uk. Thank you very much for watching.
