Vietnamese mossy frog drip wall paludarium

Mini World Craft
6 followers
10 Video Views·Apr 7, 2026
Six months ago I set up this awesome paludarium for my Vietnamese mossy frogs.
I think it looks good and it's grown in quite well but I feel like I could do better
as well as provide a better home for the frogs.
Over the course of this video I'll show you how I created a new and improved
Vietnamese mossy frog paludarium. I'll show you everything I did including
making a new background, scaping, and planting the tank. Let's get started.
The first order of business is to dismantle their current setup.
Like I said I was really happy with the end result of this one
and I am a bit sad to be dismantling it considering it was my first video.
However I feel it wasn't necessarily ideal for my frogs
and I feel like I could make something even better.
Luckily I'll be able to salvage most of the plants and wood
but unfortunately stuff like the substrate and background are just going to have to be thrown away.
I would have liked to keep the background and use it for smaller projects
but due to the way it was attached it just wasn't possible.
As for the substrate, it was just too dirty it wasn't worth saving.
Dismantling the tank itself was pretty easy, it was the stuff that followed that was hard.
After I had everything dismantled I was removing the tank from the stand
so that I could take the background off and apply a new one and the door fell off.
Luckily the polycarbonate itself didn't crack
but the whole rim came off and I ended up having to redo part of it.
I also ended up losing the footage of putting the new background on.
Speaking of background it's time to make a new one.
I'll be using the usual foam and drylock technique
starting with measuring and cutting the foam to size and then snapping it in half.
After getting the foam cut I started drawing on the pattern.
The pattern is pretty similar to the last one but I wanted to make it look a little more rocky.
The way I did that was make the edges and corners look a bit more rough.
Then I used my wire brush drill bit to outline the shapes.
Before starting this project I was debating whether it was necessary to make a new background
and I came to the conclusion that although the previous one probably would have worked
it didn't look as good in detail as I wanted it to.
It was the first background I made using this technique
so naturally I think I can make it better.
Anyway after outlining the shapes I started to give it texture.
I used a slightly different texturing method this time
because I wanted to make it look more like rock.
Once it was carved and sealed up with a heat gun I started to paint it.
As usual I start with a thick base coat of dark gray
and then add progressively lighter dry brush coats.
I used two coats on the last one but I'll be using three on this one.
I've been wanting to experiment with new background techniques
because although I think this one looks good it's very time consuming.
I've used the expanding foam topped with coco fiber method in the past
and I haven't had much luck with it.
It doesn't look nearly as good as this and it didn't hold up long term.
Like I said I lost the footage of applying the background to the tank
but you've seen that before.
Anyway after the silicone had cured I started to scape the tank.
Last time I placed individual branches vertically
but this time I wanted to place them horizontally.
The reason I did this is because I was observing the behavior of the frogs
and they wanted to hang out on leaves and stuff.
Unfortunately a lot of leaves aren't strong enough to hold them
so I wanted to give them a place like this that could hold them.
I'll still be adding a few thicker leaves that I think will be able to hold them
but I just wanted to give them this space just in case.
I'm also planning on covering it in moss so that way they'll feel more camouflaged.
The wood was pretty stable as is but I just wanted to make sure
so I siliconed it in place.
Anyway that completed the scape.
Now it's time to add the substrate.
I'll be using sand so I want to make sure to cover the filter in gravel
so it won't get clogged.
I've had problems with choosing the right substrate for this tank in the past
but I had some extra sand lying around so I thought I'd try it.
After that I started to make the land area by piling serious stone
and adding bits of wood to it.
Next thing to do is add the plants.
Like usual I take them out of their pots and start removing the soil from the roots.
I ended up losing the footage of planting the tank
and I also ended up losing some of these plants.
You'll see why later.
With the first version of this tank it took me quite a while to figure out what plants worked
so now I have a better idea.
Once I had all the soil off the roots I also took them outside and stuffed any excess soil.
Once the plants were ready I scaped the tank and filled it up with water
and that's when it happened.
So it's the next day.
I was just done last night.
I didn't want to deal with anything else.
It was awful.
As you can see my room is an absolute mess.
There's rags and stuff moved everywhere and you can see here the damage.
It's pretty bad.
Luckily all the plants seem to be alright for now
and luckily the frogs weren't in there when it happened.
But it's still a major setback and still kind of a big problem
but I'm gonna get some glass today for that
and then I'm gonna re-silicone it and we should be back on track.
So that's what I did.
I removed the old pieces of glass and attached a new one.
After that I started to add new plants and like I said earlier
most of the old ones died due to lack of humidity.
I was still watering them multiple times a day but I still ended up losing them anyway.
I also ended up getting sick right after this happened so that made things even worse.
Anyway some of the plants won't be in direct contact with water
so I'll counter that by adding sphagnum moss to the roots.
I'll water this occasionally.
After that I added them to the tank.
I found sphagnum moss to be a great way to keep these plants alive
without them being in direct contact with water.
I also added some to other plants around the tank.
During this process I also added moss to the wood.
It won't stay by itself so I'll secure it with thread.
It looks pretty banged up now again due to lack of humidity
but it should come back within a few weeks.
I also decided to add a few more branches that I tied java moss to down in the water feature.
Once those were in place that completed the build.
The new and improved Vietnamese mossy frog paludarium.
Like I said I really like the old one but I think this is a huge improvement.
It not only looks better and less messy but it'll also provide better space for the frogs.
I also forgot to mention earlier but the drip wall feature is still in place
it just doesn't work as well.
I mostly want to keep it so it retains humidity better.
After all mossy frogs need fairly high humidity.
Anyway I think this is my best tank yet.
I know I say that with all of them but my goal with every tank is to make it better than the last one.
I think the plants all look so much better and I think the frogs will enjoy it a lot more.
I also think the moss adds so much.
It was a pretty rough process making this tank as so many things went wrong.
But when you have enough passion for something
even when things get hard you can get through them.
I want to say a special thank you to everybody that was so patient with me for this one
because like I said I was going through a lot at the time.
I really appreciate you guys being patient and supporting me through the whole process.
Anyway that's all I got for you in this one.
Let me know what you think about it down in the comments.
Thank you guys so much for watching and don't forget to like and subscribe.
See ya!
