We Went to NASA to Solve a Computer Mystery

Tech for Change
4 followers
3 Video Views·Apr 7, 2026
We went down to NASA to learn about how air works! Just how much distance does your fan really need before you've ruined it's performance? Turns out it's pretty complicated.
All of these cases have a big problem. Can you tell what it is?
If you said the intake fans are starving for airflow, give yourself a gold star.
This was a widespread problem in case design for years. But new airflow edition cases have
flooded the market, completely solving it. Or have they? See, there's nothing that Lee and Lee
or Fractal can do about users shoving their cases right up against the wall or on top of a shag
carpet. You could be totally killing your games, bro. Killing your games.
But by how much? How much space does a fan need before it gets starved for fresh air?
To find out, we sent Adam all the way to NASA's Langley Research Center in Virginia.
To work with some of the top scientists in America to figure out just how close
is too close for good PC cooling. And how close is too close? For me to segue to our sponsor,
Ugreen. Their IDX series of AI NAS devices are making it easier to organize your videos,
images, and documents. Learn more at the end of this video or click our link in the video
description. I know how I would try to answer our question, but where would NASA start with
a problem like this? Great question. We're at the hypersonic test complex at the NASA Langley
Research Center and we're going to do some super scientific stuff. And that means we're using this
tape and this string. I'm not even joking. This is called tufting and it is decidedly low tech,
but it remains one of the most important forms of aerodynamic testing that can be done. And it's
basically where NASA starts every single time. You see, air is difficult to study because it
Wow. I wasn't that far off. What you're looking at is a Noctua NF-A12X25 with some acrylic acting
as our airflow restrictor or our panel with tufts or little pieces of string on the backside of the
fan. We can see how adjusting the distance of our panel from three and a half centimeters
down to just 0.5 centimeters affects our airflow. We'll put the specifics up on the screen and you
Actually, we changed our minds. It's an article on the lab's website. It's in the description.
So what did we find out? Well, a few things as you'd expect at an ample distance from our panel,
our fan performs admirably sucking air in on one side and blowing it out the other. What I didn't
expect though, was that the tufts near the center only started to get a little floppy when the front
panel got really close, just one and a half to two centimeters from the face of the fan. Another
thing I didn't expect was that getting even closer caused the fan to not only blow in effectively,
but even start sucking the tufts back into the blades indicating reversed airflow. But it's a
little hard to see like this. Oh yeah, I forgot. These are strings. They glow in the dark. We took
this big ass NASA grade ultraviolet lamp to get maximum glow from our tufts while we recorded on
this beast, the Kronos 4k 12 high-speed camera. We're prepping our 1000 fps 4k camera. That's about
11 gigabits per second of data, which means that recording on this for a minute is going to be
bigger than your call of duty install. And in slow motion, we can get a much closer look. Note the
increased tuft movement in our close-up test condition indicating more turbulent flow. And you
can even see some of the tufts dragging into the middle of the fan where there's areas of low
pressure. Pretty cool, huh? Super cool, Adam, but we have Kronos camera at home. Why did we need
NASA for this? We didn't, but for what we're going to do next, we sure did. And besides, if NASA
invites you out, are you really going to say no? They were even nice enough to give us a whole
tour that included an incredible new maker space that they use for rapid prototyping. Our supporters
on Floatplane get exclusive access to that and a ton of other content. So if you want to check that
out, head over to lmg.gg slash Floatplane. For now, I'll just give you a TLDR. The Langley Research
Center is kind of the OG NASA facility. In fact, it predates NASA itself. Founded in 1917 as part
of the NACA, which is the aeronautics organization that would eventually become NASA. The Langley
Research Facility was key to numerous discoveries and improvements to early flying machines,
creating the first hypersonic jets and paving the way for space travel, and would go on to play a
key role in the Apollo missions. Currently, one of the focuses of the research center is
assisting the Artemis campaign to get to the moon as a means to get to Mars. Pretty cool. A little
bit out of the scope that we're going to be working on today. So we're going to steal a couple of the
3,500 employees that come here every day to do some more down-to-earth testing. We're inside of
the hypersonic test complex at the NASA Langley Research Center to answer that... Wait a second,
this is the same lab. Yep, same lab. I thought we were supposed to go somewhere that was like more
high-tech. Oh, it's more high-tech over there. Oh right, and this is Dr. Lewis Edelman. He's a
researcher here at NASA, and he's helped design all of these experiments that we're going to be
running today. Hello. So what the heck are we doing? So we've moved on from tufting to particle
image velocimetry, or PIV. Oh. Flashing lights and fancy cameras. Sounds like my kind of deal.
First, we shine a bright light focused into a thin vertical sheet. Then we fill the air with,
you guessed it, particles, and start rapidly taking pictures. Now, that might sound like video,
but it's different in one important way. Instead of taking images at a constant frame rate,
we instead take two samples just microseconds apart, followed by a short gap, then another two
samples, and so on and so forth. We can then use really clever math to determine the velocity of
the particles. Note that this is not speed, but velocity, because we're talking about how fast
they're going and also their direction. Sounds simple, right? I mean, not really, but for starters,
the particles we're tracking are not air, which means that they won't move exactly like air.
Second, to do this right, we need the velocity of many particles. That means thousands of samples
across thousands of images. And third, we need some pretty special cameras. The LeVision Flowmaster
is a super high precision machine that uses a double frame buffer to take photos just
nanoseconds apart. All right, it's finally time to test. Hit it! So this is our first test result.
That means there's no obstruction on this fan. No obstruction, pure control. So we've just,
we're doing the analysis now on one image pair as a test for the processing stream, and we go, okay,
that's not very clean. Once we take an average of the 200 or 158 images we just took, this will fill
out to look like a fairly nice picture. And importantly, that this is kind of the hub, like
we're really only looking at the top half of the fan right now. We're looking at the top half of
the fan. Would it be fair to expect that there would be, I mean, it's a circle, so there'd be
symmetry on the bottom? I would expect radial symmetry in all things you want to try and measure
in as much detail as possible. So if we were fully zoomed out and looking at the whole fan,
we'd be wasting resolution effectively. So this is it applying the scaling from pixel space to
physical space from our calibration plate. Now it's starting to do the PIV, and we can see for our
158 frames, that's probably going to take about 20 minutes. What is this computer running on?
This is a i9-14900k with 192 gigs of RAM.
So this just takes a long time, is what you're telling me? Yes. After considerable number
crunching, we've got our results. And what you're looking at is a narrow slice of air
that is flowing out of the fan. The colors indicate the streamwise velocity of the air,
so how fast it's going away from our fan blades. And then the arrows are kind of just an easier way
to visually process that same information. Then to make it even simpler, we added these dots.
Without a front panel, flow is smooth and fast moving. There's a small section where you can
see there's no flow, but if you look closely, that's right behind the fan hub where there are
no blades. Now it is important to remember that this is just a thin slice of the overall airflow
in what is a 3D space. Our test isn't going to capture the spiraling 3D vortex of the air,
but the overall direction away from the fan is what's most important for cooling,
so this is good enough for our purposes. Fun observation, by the way. Dr. Edelman noted that
the way that Noctua's fans throw momentum inward more than a typical fan contributes to reducing
their overall noise. Good job, Noctua. When we move the plate closer, we don't see much change.
That is, until, just like in our Tuft test, we get as close as about 15 millimeters. Take a look
at how large our dead zone has become now. We also noticed that the flow of air is starting to
curl outward rather than coming straight out of the fan. What that means is lower streamwise momentum
to blow air across your components or to pass through a restrictive heat sink or radiator.
But why? Well, it's due to the difference in radial pressure. The air that passes through
the tip of the fan blades is lower pressure and almost bounces off the stagnant and thus higher
pressure air that's right by the fan hub. This isn't optimal, but our overall airflow is still
pretty good, so for a case fan, it's probably still fine to have this much restriction.
We will check on this test condition again later once we add a radiator. For now, let's look at our
worst case scenario in open air. Imagine your case is right up against a wall or your power
supply intake is on the floor on a carpet. This is what you're doing to your poor, poor PC.
Not only is the fan barely pulling any air in at the edges, it is so starved for air that there's
a reverse flow that causes the air to curl into a vortex that isn't going to move heat anywhere.
And that's your best case scenario. What if we were trying to cool something directly with our
starved fan? To find out, we whipped out a water cooling radiator to create a scenario with much
higher back pressure. You can think of back pressure as the friction that a fluid experiences
in movement, and as you can see, adding a ton of friction to an already restricted fan results in a
two-word review of my debut rap album, zero flow. Now naturally, backing this off to a 15 millimeter
gap yields much better results, but it's still worth noting that this is a massive drop in
performance compared to our free air test, especially with respect to the size of our
dead zone over the fan hub. Practically speaking, we're only getting flow on about the outer 50%
of the fan blades. Interestingly though, the radiator completely straightens out the flow,
and we don't see that same outward curling, but the speed is cut about in half. So what does all
of this mean? Well, we can't draw overly broad conclusions. We only tested the NFA 1225 at full
speed, but it seems like you can get as close as about 15 millimeters or a little over half an inch
from your fan with reasonable performance. Any closer, and you are seriously harming its cooling
ability. An obvious question would be, why go to all this trouble? Couldn't you have just sent a
piece of acrylic and a fan to Cybenetics to put in front of their fan tester? Well, yes, but also no.
While a fan tester would tell us the performance of the fan under various conditions, we were more
interested in measuring the behavior of the air, which tells us not only the answer, but it also
lifts the veil on why the answer is what it is. It also gave us an excuse to check out another
really cool piece of kit down in Virginia. If you thought air was complex, well, just wait till
human perception gets involved. Yeah, we're going to talk about sound. Now, we have been hard at work
improving our audio testing at LTT Labs. I mean, we even just built a home theater room to test
more speakers now, but what we don't have is a NASA grade audio chamber. This is the shack, and
it's a little old place where we can do some testing. The small hover anechoic chamber was
constructed in the late 80s, and it gets as quiet as 18 dB, which is disconcertingly quiet. For our
testing today, we're using two different arrays, a linear one up there and a spiral one. Why are
they different shapes? Well, they have two different jobs. The linear array is a directivity
array that gives us a broad idea of where sound ends up in the chamber. The spiral array, also
called a phase array, is a collection of 40 beamforming MEMS microphones that allows us to
get super detailed information about the source of a sound. These microphones are so precise that
we can map the location of the sound onto footage from the camera that sits in the middle of the
array. Essentially, you can define a region in here, and it will perform an integration. It's
a little hard to see, but right now it's just region one, two, and three, and then you can
basically go ahead and have it process it and give you a spectrum like this with the different
contributions of those regions to the total sound field, or at least what their array picked up.
Why would folks at NASA need to know this kind of stuff? Well, when they're testing the acoustic
properties of something, they want to know where that sound's going to be coming from. Like this,
for example, they might want to understand if the sound is coming from the tips of the blades,
or if it's coming from the rotor itself. There's only one way to find that out, and that's to use
the phase array. I mean, there's probably another way to find out, but the way we're going to do
is the phase array, so stop asking questions. Well, you can ask one more question. If you
noticed, our fan is looking a little pink. Why would folks at... That's because this apparatus
was designed to test rotors for things like drones. So our NFA-12X25 that we were using before,
it was a bit too quiet, and we swapped it out for this industrial version that runs considerably
faster and considerably louder. The paint that's on it is this funky pressure-sensitive paint that
we were going to use for another test, but we ran out of time because NASA has a lot of important
work to do. Anyway, I bring up the paint because it might make the fan perform a bit worse than
what Noctua would ship from the factory, but we aren't comparing it to other fans. We're only
comparing the intake clearance, so we're not worried about that. Again, because of time
constraints, we decided to just test the fan without the front plate and at the 15-millimeter
point. Now, intuitively, you might think that covering a fan would decrease the amount of
noise that it makes, right? But if you've ever tried placing your hand in front of your PC fan,
you might have noticed that it often gets louder up until the point where it becomes
completely starved of air. And in our test conditions, that's true. You can see a broad
spectrum increase in noise when the front panel's present. Why? Well, referring back to our PIV
results, remember the stalled flow in the middle? That causes the overall airflow to be more
unsteady, which makes it louder. Think of it like roaring rapids versus the smooth flowing water in
Mississippi Delta. And this increase in noise also shows up in our phase array results. Yet
another reason to not let your fans get too close to obstructions. Even if you have cutouts in the
side panels, those can still cause annoying resonances. Fractal Terra owners will know this
very well. In summary then, for performance, keep your fans more than 15 millimeters away from any
surfaces and 20 millimeters or more if you're going to be contending with other obstructions
like a heat sink or a radiator. As for noise, it seems like you can't have too much clearance from
the intake, but you can definitely have too little. There are 100 other questions we would
have loved to answer, but frankly, NASA was already extremely generous with their time
and they are hard at work answering much larger questions. This may not have been the be-all and
end-all answer that you were looking for, but that's just how science is. It's the accumulation
of many tiny discoveries, solving many tiny mysteries that build up to create a knowledge
base that allows us to have a greater depth of understanding of the world that we live in. Before
we go, I want to thank all the folks at NASA who helped make this possible. Lewis, Brittany, Nick,
Jordan, so many more folks that I haven't named helped make this trip possible. Thank you so much.
Thank you for watching and of course, thanks for this segue to our sponsor. Ugreen. Their new AI
NAS has a maximum capacity of up to 196 terabytes, but with the amount of data stored on the network,
it can be difficult to keep things organized in a way where you can easily find what you are
looking for. Thanks to Ugreen, there are now more efficient ways to search and sort through all of
your precious files. Find what you need in seconds across all of your photos, videos, documents,
and apps with their universal search tool, or automatically organize everything and save time
with practical smart features by using semantic search, OCR text recognition, and custom training.
It can even create themed folders for everything. If you ever need assistance,
their local AI chat tool is also there to help. Ugreen NAS also has built-in security manager,
which supports real-time virus scanning and flexible permission management with support
for multiple RAID configurations. Check out our links in the video description to get the early
bird pricing reserved with $30 and save up to $1,040. Thanks for watching. If you like this
video, why don't you watch another one of our videos where we tour some cool place like,
how about, there's an internet exchange in Toronto that was pretty dang neat.
Thanks again to NASA. Thanks for watching. Bye.
