Tech House Cabling Ended Up Being a HARD Choice

Tech for Change
4 followers
42 Video Views·Jul 3, 2026
Today Elijah and Linus talk about the pros and cons of both Cat5e and Cat6a. With the walls of the tech house down we need to decide WHICH cable we are picking to install because once the drywall is back on it will be difficult to change. Comment down below which cable YOU would run!
AI Generated·May contain errors
Video Summary
AI GeneratedTwo technicians rewire a \"tech house\" following asbestos removal, focusing on optimizing network infrastructure. They implement a hybrid cabling strategy using Cat5e and Cat6A, relocate the fiber ONT to a central closet, and deploy Ubiquiti hardware and wireless access points to ensure high-speed, comprehensive coverage throughout the home.
Trust me guys, we didn't wanna tear the tech house
down to the studs either.
But now that it's done in order to remove
all the asbestos that was in the walls,
it's put us in the bestos position
to properly wire this place up,
which it turns out raises a surprisingly divisive question.
What kind of data cabling should we use?
When I wired up my house, I went full overkill.
I ran high-speed networking, fiber optics,
even display cabling inside my walls.
And then to accommodate future standards,
I even ran empty conduit.
It's sick, but most people don't wanna deal with the time
or the cost of wiring up their home like a small office.
I mean, don't get me wrong, CAD 6A is great
and it made a lot of sense for me.
It's shielded to reduce interference.
It officially supports 10 gigabit speeds
and it can carry power farther
thanks to its thicker conductors.
However, it's a bit of a double-edged sword
because all that extra copper and shielding
makes it both cost way more and weigh way more.
Also, the ends are harder to untwist and stuff like it.
It's significantly less convenient to work with.
And besides, Cat5e can officially handle
up to five gigabit per second anyway.
I mean, what is a typical home user doing?
Whoa, whoa, whoa, whoa.
You are not going to cheap out here.
What do you mean cheap out?
The difference in price between these two
is less than you made when you cosplayed Linus Meth Tips
pulling copper out of the crawl space.
Okay, fine, fair enough.
But that doesn't change that it's a pain to work with.
Have you ever worked with CAD 6A?
Yes, I have.
But the audience doesn't care if we're the ones
that lose all the skin on our fingers.
They want us to do this properly.
All right, I'll tell you what.
We'll get started with the main trunks
to our day-to-use hotspots,
like the media console in the living room,
the theater room upstairs, our power-hungry access points,
and how about we see how those fingies are feeling?
And then once those lines are run,
maybe we'll see how we feel about the other lines.
And let's see how we feel about doing this line,
segwaying to our sponsor.
Delete Me, data brokers are buying
and selling people's information,
and it's totally legal.
So it's about time that you ask them to stop.
Get 20% off Delete Me consumer plans with our link
and use promo code LTT20.
♪ Got some work to do, work to do ♪
♪ And you and I could make our dreams come true ♪
♪ Together in this tech house thing ♪
To be clear, my main argument for Cat5e
is not that I love it so huggy-muggy much.
It's just that we don't need more.
The vast majority of the devices in your home
are gonna be one gigabit or even 100 megabit,
looking at you, smart TVs.
And if you need more, 2 1⁄2 gig has become downright cheap
with NICs available for as little as 10 bucks
and managed switches for about $50.
So this cheap, bad cable can do 2 1⁄2 gig
or even five gig at up to 100 meters.
At that point, the ease of use and the lower cost,
that's just the cherry on top.
He's not wrong.
Cat6e is harder to work with,
but it also has some real-world advantages
that you can't just ignore either.
And the biggest one for me is just the raw speed.
Five gig is good, but 10 gig is literally twice as good.
And while Cat5e has been known to run 10 gigabit speeds
over short distances, it's not officially supported.
And I can't help but feel like,
well, we've got the walls off now.
And even if I don't need 10 gigabit today,
the last thing that I would want to do is go plug in,
I don't know, a Steam Machine 3 or something.
Oh, we all know Valve's never gonna make
a third one of anything, be real.
You're not wrong.
But you're okay, but I see your-
We've got the drywall down now.
I don't want to rip it off in the future.
That's a fair point too.
There's no one right answer,
which is probably why debates between these two choices
can get a little heated.
Maybe our centrist approach will please everybody?
So 6a, where we're likely to have multiple devices,
and then 5e branching out from there.
Or, I don't know, maybe we'll just bear down
and do 6a on everything.
One thing I know for sure though,
is that we won't be doing any of that until we move our ONT.
Here in BC, we can get true fiber right to the house.
Check that out.
Fiber optics right into your box from TELUS.
But our network closet is not here in the living room.
It's actually all the way in the upstairs room
above the garage.
So we're gonna have to extend this fiber connection.
To do that, we bought this fiber coupler.
It was about 40 cents online,
and we also bought a fiber coupling box,
which is gonna sit on the wall where our fiber comes in.
Then all we would need to do
is run our existing fiber into that box.
We use the coupler,
and then we run our 20 meter fiber cable
all the way up through the attic
and to the closet over there.
Essentially.
Oh, don't do that.
That was fiber.
Yeah.
These couplers are supposed to go only in one way,
and that's to help align it.
Because depending on which fiber connection you have,
it might either be more of a dome surface
or a slanted surface.
And with our current fiber coming in,
and this coupler,
it'll make sure that our slants end up being aligned
when we add our fiber cable.
And it should only match with the notch,
and there's a notch on there.
And we can take ours now.
Thank you, Infinite Cables,
for getting us these really fast.
It's easy for them.
They have Infinite Cables.
Look, they called their company that.
Of course we're gonna meme on it.
At least they're not a narcissist.
They didn't name it after themselves.
How do you know that it wasn't started by John Infinite?
No, it can't go this way,
because then I would have to screw it in from the outside.
That's okay.
Neither of us is a fiber optic networking technician.
But after today, we will be.
Certified.
Trust me, bro.
Would you let these two into your home?
I know I would.
Why'd you put this in here?
I can't get,
I can't reach the release now.
I thought that was the way it went.
And then after I put it in,
I was trying to get it out.
How am I supposed to get a release now?
The sweet release of death.
The only release we know.
Yeah, we're both married,
so we don't know any other releases.
Yeah, the old ball and chain, am I right?
God, I love how just like boomer humor is just,
I hate my wife.
It's like after 10 years,
you get the upgrade in the bed
that's got the fence in the middle.
After 15, you can get barbed wire.
Okay, here we go.
Pretty vanilla, but yeah.
Now we got this.
Nice.
Okay.
There we go.
Now we can take up any extra
and we can put a little coiler in there.
They mangled it when they installed it.
There's actually a pinch in the fiber somewhere
because they were pinching it wrong in the ONT.
I mean, that's what happens.
You pinch your coiler and then...
No, don't get a close-up.
Get a close-up.
Okay, where do you want to mount this?
Oh my God, look at this.
Stop, stop.
It's hard.
We could temporarily just mount it on a stud here.
Yeah, let's do that.
And then when the dry rollers come in,
we can take it off and...
Put it like here next to the outlet or something.
Yeah, exactly.
Got it.
Perfect.
Perfect is a really strong word for what we just did.
I'm just going to go like this.
Yeah, we just need like a little bit of...
So we can just, yeah.
So we can put a little bit of strain relief on it.
And then I'm just going to take this
and I'm going to go like that.
And then we're going to close it
and we're never going to acknowledge it again.
Should we just like...
Yeah, I think we're just going to go for it.
All right, cool.
This is going to make some people very upset.
Is there like a right way to do this?
Can I be honest?
Not a clue.
I mean...
So boom, step one done.
Okay.
No, don't break the fiber.
I mean, boy, it's not like there's glass in there.
Does he know what fiber is?
Yeah, it's the stuff that helps.
Yeah, helps your glass.
That's a kind of a tight opening.
What are you saying about my glass?
Question, if I say ass, do we have to censor it?
Yes.
But if I say glass, do we have to censor it?
All right, sick.
The whole video is now glass jokes.
Once all this is run,
we're going to go back through
with either Velcro or plastic cable staples
in order to actually secure it to the frame.
You can't just leave it loose like this.
I mean, you can, but you shouldn't.
Whoops.
We're definitely going to make sure that it works first
before we secure to anything though.
Okay, where do you want it?
Yeah, here.
You want it right there?
Okay.
Thank you, sir.
Perfect.
Ooh, don't pull.
I know, I'm preventing you from pulling.
So I think the original plan for this area here
was just to put the equipment that we need
for the theater room.
But then we were looking at it thinking like,
why not just put everything in here?
We've got convenient access to just basically
an open air space that could even be vented
straight to the outside.
Pretty freaking awesome.
And it's pretty central with easy access to the attic space
as well as an outside wall
for whatever reason we had to run something down there.
And it's very far away from any possible leak hazards.
Okay.
Oh, we'll also need a power station.
Elijah, are these the only battery banks we have?
Yeah, but you know, so big.
EcoFlow sent them, so don't complain.
I'm not complaining.
It's just heavy.
Nice.
Okay.
And then this just goes like that, apparently.
Cool.
Okay.
There we go.
We have fiber up here now.
How does this go together?
Listen, we can just both be done together
because I'm also doing this wrong, I think.
What the **** is going on here?
All the TELUS technicians watching this right now
actually dying inside.
No, they just feel seen for the first time.
Okay.
That is not where the power goes in,
but wait, why did we do this?
We have to put this on the wall.
That's future Linus' fault.
Yeah, future Linus.
What a glass hole.
That's definitely not supposed to go over there.
That's fine.
Cause like, we're going to,
this is going to go on the drywall for sure.
Yeah.
We don't want to mount it today anyways.
I mean, we can start running the rest of the cables
if we want.
It's on.
Red's usually good, right?
Yeah, I think it just means that it was like,
psych, see, it's green now.
A washed ONT never connects.
All right.
Hey, where are you going?
Cable's right here.
Right.
Nice.
Which run do you want to do first?
He's shy.
Used to be an Audi, now it's a Mini.
He's shy, proceeds to reach hand inside him.
Is that the right end?
Who knows?
I don't think you grabbed the right one.
You definitely did.
Oh, wow.
Okay.
All right, let's go.
Basically this box goes there
and one of us climbs like a monkey
to deliver the cable where it goes.
Do you want to do the access points first?
Fine, I'll do it.
Oh, oh, oh, oh.
If he can't figure out
that we're playing rock, paper, scissors,
I don't think I can trust him to crawl around in this roof.
All right, have fun.
That is still flashing.
Don't stick a finger in this one.
If we're going to do access points,
I actually used a new tool by Jimena.
Yeah.
It can actually like 3D map your house
so you can actually see where the best strength
and spot is going to be everything.
We have three spots we want to focus on.
One is actually up here in this room.
One is going to be above the master bedroom.
And then the third one is going to be
above the kitchen kind of living room area.
We probably could have gotten away
with just one access point.
Yeah, it's not a huge house.
It's yeah, not needed.
But if we want optimal coverage,
I think three APs is perfect.
And once again, doing it now
while the walls are off is definitely the time to do it.
And which one am I running right now?
Master bedroom?
Master bedroom, okay.
That's quality drywall.
Oh, you're going like all the way up.
Yeah.
Okay.
Yeah, I think that'll be good.
Have fun, sir.
We're going to see if our ONT is working here.
Plug our laptop in and see if we get a signal.
We're good, I think.
You don't have internet.
But I don't have internet.
I figured out why we don't have internet.
It helps if you plug it in.
What?
He's above you.
Like directly above you.
What?
Oh, come on.
We just didn't plug it in at all.
It's plugged in now, okay?
I'm sorry.
No, we both made that decision together.
Spider Linus, Spider Linus.
Where exactly do you want this run to?
It doesn't really matter.
Anywhere in the master bedroom,
maybe closer to the back wall
so the backyard coverage is better.
Sure.
Okay.
And the good news is we've got internet.
Oh, nice.
Okay, that's actually a massive relief right now.
The insulated lines are in for our ceiling cassettes.
That's going to be a future video.
We're going to be air conditioning this place DIY style.
Are we putting any of those APs in today?
The goal was to.
Okay, great.
Give me another three feet.
All right, pull.
Oh yeah, that's perfect.
Okay.
That's like eight more feet, but I was wrong.
Three feet was not right.
All right, so I'm going to put this
basically right here.
Cool.
That's one run done.
Okay.
Nice.
Oh, gymnast approved?
Gymnast approved.
I was a gymnast if audience didn't know that, but.
Not OSHA approved.
Yeah.
And according to Haminia again,
you kind of want to go above like where maybe the
like dining room table would be.
Oh yeah, okay.
Saying somewhere like around here.
Okay.
It's worth noting that if I was wiring up an office
or something like that,
I would be trying to run everything together in big bundles,
but realistically we're going to do a grand total of
probably less than a dozen drops in this place.
So as long as we do it in such a way that we can
cable manage it to the studs,
then it'll be out of the way for anyone who needs to be
up here working in the future,
whether that's on, you know,
insulation or air conditioning or other wiring.
Okay, let's go.
Go one more over.
All right.
This third run,
if this is the other AP is going to be for this room.
Okay.
Oh, oh, you want it to go up through the ceilings?
Right, right, right.
Yeah, sorry.
It's really hard to tell who gives attitude more
when it's the both of us working on a project.
We have fun here.
Yeah.
This would have been a good day
for the Metaglasses actually.
Oh yeah, well.
I didn't think to bring them.
What are you thinking we're trying to cover with this one?
Obviously the theater room here
for people second screening, but what else?
Well, the garage is right below us.
So if we have any of the wireless devices
like the lawn mowing robot.
Oh yeah, any IOT stuff.
Exactly.
Should we go more to that corner
to get away from our other ones
or are we kind of good dead center in here?
What did Amina say?
Amina was fine with this area.
It depends on more if you want more front yard coverage
or more garage coverage.
Cause this would be more garage coverage.
And then obviously closer would be more front yard.
I lean more garage coverage.
Then we're right in the right spot.
Okay, let's do it.
We have two more runs to do
or we can finish doing the APs.
What do you want to do?
Let's put some APs on these things
and let's get the wireless working.
Let's do it.
All right, now for some pain in the ass.
Cat 6A.
He's going to be a grumpy.
He's going to be so grumpy this whole day.
And I was like fricking twisting cat 6A all day.
I don't even mind it that much.
It's just the unnecessariness.
My crimper has a cheat sheet on it.
So I never bothered to memorize it.
Hold on.
Oh, the A and B.
Blue stripe, green, green stripe, blue,
brown stripe, brown, I think.
Why don't we just go ROYGBIV?
Orange stripe, orange, green stripe, blue.
Is that what I said?
Blue stripe, green, green stripe, blue,
brown stripe, brown, I think.
Orange, orange, green, blue, blue, green, brown, brown.
Man, I haven't done this in a little while.
I haven't either.
And I can tell I'm very slow at this right now.
I am very rusty.
And done.
It's not a race.
Not with that attitude.
All right, I think I got it.
I'll go grab the POE switch.
It is so fricking hot in here, man.
They say perspiring is a sign of being in good shape, right?
Actually, you know what?
Go figure.
I might have a tech tip for you.
Oh, please.
It's not really necessary with Cat5e
because it's a lot easier to work with.
But what you wanna do is you wanna do a diagonal cut.
And so what it does is it makes it
so the horrible little guide goes in a lot easier.
You just give it a little wiggle like this
to get everything aligned.
Safety squints.
Okay, so you wanna cut it at a diagonal like that.
Sure.
What tends to happen is as you put them in,
they just kind of magically
all move over.
All move into the right spot.
Oh, okay, cool.
See?
And that's something you don't really
have to do with Cat5e
because it just goes in so much easier.
That's what the E's for.
Oh!
A must stand for pain in the glass.
Nice.
Sorry, my hands.
My hand was very sweaty too.
We traded fluids there.
Not the first time.
Won't be the last.
Let's talk about this network switch.
While we haven't settled on final networking gear
for Gee yet,
in order to get everything working today,
we brought over a Ubiquiti Cloud Gateway
and this campus switch.
This is for sure ludicrous overkill.
It's not gonna be staying here,
but we needed something with PoE
in order to power our access points
and champagne problem,
this was what we had lying around.
We may use the Cloud Gateway in the final install,
but we're not 100% set on that yet either.
And same goes for our APs.
These are the U7 Pro XGs that Ubiquiti sent us.
They might be a little overkill for Gee,
but it also gives us the best case scenario
for test driving Wi-Fi in the space.
And then we could pick something more appropriate
down the line.
We're gonna put it here for now.
Man, I love these RGB switches.
They're so cool.
It feels unnecessary,
but they are actually really useful
when you're trying to diagnose a problem.
Yeah, you're trying to track down like,
oh, which one did I plug the camera into?
Whatever, you have everything color coded.
Ubiquiti gets like so much attention on this channel
just for like us having their gear on hand
and it being good ----.
You know what?
Actually, that brings up a good point.
I'm thinking we should do a blanket call out to companies
to send us stuff for the Christmas party.
Cause then what happens is those gifts are more likely
to show up in like a future video
when we're like upgrading an employee setup.
That's a long shot.
Although it worked pretty good for EK.
EK sent us like 5K worth of coolers.
They got easily 30 million views.
Do you like my mounting job?
Oh, hey, boot it up.
One thing, it's possible that it has power, but not data.
So we got to wait for it to actually turn blue
and work before we celebrate.
Ask me how I know.
How do you know?
Because I once terminated an ethernet cable
almost 10 times.
I don't remember exactly how many it was,
but basically what happened was on the ground,
I was doing it like this and coming out of the ceiling,
I was doing it like this.
It had been a very long like year and I did it backwards.
Like, I kid you not, like eight times in a row.
This is hilarious.
Stop.
He was just complaining about his thingies.
He was making a patch cable.
So Cat 6A for the main trunks, Cat 5E for the rest.
I don't know, pay an electrician.
Dude, this is so on theme right now.
What?
This is finally launching.
Okay.
The fast, fresh and fiber optic hoodie.
Oh, that's pretty cool.
Hopefully it'll be out when this video goes out.
Is that amazing or what?
That's pretty cool.
Lttstore.com.
We're going to do one more run.
Well, two more runs, I guess.
Yeah, we'll go up the same spot.
We want this to go to either one of the living rooms
or family room or living room, I guess.
Thanks for watching, audience.
If you enjoy this video, make sure you like and subscribe.
I was getting intimate with the audience
for a second there, don't mind me.
Yeah, I mean, you don't know how to get them
to like the video.
I know how to get them to like the video.
If you like videos with glasses.
I hate that that push will actually get more likes
than what I did and it kind of bothers me.
Let's do the family room.
Is this the family room?
Yeah.
Okay, so then wherever the TV console is going to be.
Probably in the center, I assume.
Good catch.
Thank you.
We reversed roles so I could keep an eye
on what's going on with our gateway.
And it looks like firmware update solved our problem.
Boom, switch adopting and we're good to go.
Now, the only thing we need
is for that access point to adopt.
I just want to get labels on these things.
Realistically, even the terminations we're doing today,
we're probably going to undo these
and we'll do a patch panel.
But having everything labeled makes our lives a lot easier.
Which one did you pull?
Is this it?
Yeah.
Okay, so this is the family room.
How right out of 10 was I about Cat5e?
I never said anything you said was wrong.
And I never said anything he said was wrong either,
which is why we ran Cat6a to, well, everywhere we did today.
You know what?
We actually had to delay the second part of this shoot,
which is the rest of the networking.
So maybe we'll give time to people
to tell us what they would prefer.
Let us know in the comments
because I think we're going to have,
this was the more sort of educational one.
And then the next one I think is just going to be
us in a gang network shenanigans, right?
Basically.
And we'll go in and we'll like tackle these down.
And everyone really wants 5e, we'll do 5e.
Or if they want 6a, we'll do 6a.
Let's see if this AP works.
There it is.
Now you notice we only did the one run
to the family room and the living room.
And that's because we're going to install
one of these mini 2.5 gig switches.
It's PoE powered, meaning we only need the one
ethernet cable from our network closet.
No wall plug.
It's amazing.
And all five ports on here are 2.5 gig.
What that means for now is that as long as
not every device here is hitting the network at once,
we won't be bottlenecked.
But if they were, it would.
Unfortunately, these switches with even a single
10 gig uplink are still pretty expensive today,
which is one of the reasons that I had said
cat 6a maybe doesn't matter that much.
But what's the likelihood that your Xbox
and your PlayStation are both going to be hitting it
at maximum at the same time in the same place?
The PS10 will.
Future-proofing.
Nice.
Oh, it worked.
It did?
Yeah, it's powered.
We're plugged into our switch.
We're going to install Cyberpunk.
Oh yeah.
I've got about 900 megabit here.
I think you're actually getting spikes
that are higher than you'd think.
Say you're at 1400, 1600 right now,
but it's not updating as often for you.
So you're getting good speeds.
Okay.
But it's a little inconsistent.
I think that's probably more down to how Steam
is downloading and unpacking this thing.
Yeah.
Versus like our network or anything.
Why don't you just do a internet speed test?
Oh, sure.
Show off.
There we go.
2.1, 2.2.
Hell yeah.
2.3.
We can go on wifi.
Yeah, we're getting about 1.1, 1.2
is where it's ending up.
It's still very good for now.
What should we use?
We'll let you guys decide in the comments.
And we'll let you guys decide.
If you like this segue.
To our sponsor.
Delete me.
Your personal information is out there
on the world wide web.
I know that.
You know that.
And I assure you, data brokers know that too.
And those little gremlins are gobbling up your name,
phone number, address, blood type, you name it.
Basically anything.
And then they're selling it to the highest bidders.
This is totally legal for them to do by the way.
Delete me is a hands free service
that is going to help you remove your personal information
from hundreds of people's search sites.
They do this with in house tech.
No outsourcing to third parties,
keeping your data even safer.
Delete me even has real life privacy advisors
that help with custom requests when needed.
People in all sorts of fields,
from judges, medical workers, journalists,
have trusted delete me to get rid
of their personal data online.
If you hate identity theft or people scamming grannies
and personalized phishing attempts,
get 20% off delete me today.
Go to join delete me.com slash LTT20
and use code LTT20 at checkout
or you can scan the QR code on screen.
If you guys enjoyed this video,
check out the whole tech house playlist.
We've, I was gonna say we've laid pipe,
but it's not that kind of channel.
That's next week.
