Draw the Driver EVERY Time (Yes, Really)

Golf - Sport of Perfection
164 followers
I'm going to show you how you can reverse your slice
and turn it into a beautiful draw.
If you slice the driver, even though I've not seen your golfing,
I can almost guarantee that there's four things that you're doing
which are contributing towards your slice.
If we reverse those four things, that slice will turn into a draw.
That's exactly what we're going to do in this video.
Do you know what? It's not as hard as many people think.
The first one is we're going to basically learn how to have better control
over the club face.
I want you to think about specifically your lead hand
and how it could be like a steering wheel.
It's going to control the club face.
So what I've done with my glove here, and I'd love you to do the same,
is I've turned my glove into a bit of a training aid.
I have placed two dots on these two knuckles.
I've placed a dot here just on the pad of the hand
and I've placed an arrow between the index finger and the thumb
pointing up and towards the back of me.
All too often, if I take a slicer and I look at their grip,
there's a couple of things that I see.
This arrow points up towards their chin or more towards their lead shoulder.
Okay, so in this area here, and you can see that.
As I look down at my hand, I can't see either of those dots on those knuckles.
I have to kind of move my head or twist my hands.
I can't see those.
And when I open up the hand, we can't see that black mark that was in here.
That grip is a slicer's grip.
That's going to cause the club face to be open.
That's going to cause the slice.
So the way that we control the club face,
the easiest way that you can control the club face
is by placing your hands on the golf club in a different way.
So if I place my grip, okay, now what do we see?
Notice how that arrow is pointing somewhere different.
It's pointing more towards my right ear, more towards my right shoulder.
If I show you from this area of my hand, guess what?
You can now see that little dot.
And I appreciate you can't see that,
but when I look down, I can see those two dots on my knuckles.
So what have I actually done?
Well, the first thing I've done is I've held the golf club more through my fingers.
That's really important.
So I want to be able to see this dot above the grip
and then it gets squashed on top.
The second thing I did was I took my hand
and I rotated it more on top of the handle before I placed my hand on.
You can see when I do that, my thumb sits slightly to the trail side.
That arrow points more to my right side that we've already discussed.
And I can see those two dots there.
So by changing where you place your hand on the golf club,
you're basically changing how this club is going to twist and rotate
and be delivered an impact.
As a coach, you can almost just look at how a golfer stands the golf ball
and make pretty good predictions to the type of shot they're going to hit.
These two golfers on the screen here,
one of these is almost certainly going to hit a slice
and one of these is almost certainly going to hit a draw.
The one on the left, that's the one we want.
That's going to help you hit a draw.
It's one of the key factors into what happens with the ball flights.
So I like to teach the golfers the John Rahm setup.
So here's what I'd love you to do.
You're going to take your regular setup with your driver.
I want that ball positioned just inside that lead heel.
But then what you're going to do is with the club resting on the ground,
you're going to use your upper body.
You're going to rotate your upper body slightly away from the target.
And as you do that, you're going to push your hips slightly towards the target.
Chest rotates away, hips go slightly towards the target.
Not a huge amount.
But you can see that looks drastically different straight away.
What it's really done for me is it's got my sternum behind my belt buckle.
Really important.
Because I rotated that club away, it actually gets my shoulders to be slightly closed,
which is really beneficial.
And what we're ultimately doing is we're ultimately taking our swing,
which is basically a big circle.
The club moves around your body in a big circle.
And we're taking it away from something that's like this.
That's a slice circle.
And we're moving it to something like this, which is a draw circle.
If you can take that setup, which is the slice setup, and reverse it
using the John Rahm drill and actually start from here,
it's going to be so much easier to do that.
I mean, that's gone too much right to left.
I mean, my club path there needs to be out to the right 12.5 degrees.
I mean, that's a ton, right?
And that's why that ball curved too much.
But you can just see the power of really good grip,
great starting position, setting my circle,
and I'm able to straightaway produce a path which is out to the right.
And what I was going to call that draw, it's a hook.
But you can see what we're trying to do.
We're trying to get the ball to move right to left.
We did that.
You can have that correct grip.
You can have that correct John Rahm setup.
And you can still slice it.
Because we can change lots within our goal swing.
So we need to cover some in-swing ideas.
Transition being a really key one.
And if I was to visualize a clock face down on the ground in front of me,
this would be 12 o'clock.
We'd have 1 o'clock.
We'd have 2 o'clock, which is where that ball is.
3 o'clock would be kind of out towards the camera.
4, 5, 6, and obviously so on.
Slicers, what they tend to do in transition
is they could well make a beautiful back swing.
But their hands and the club will often go out to that golf ball they've got on the ground.
That kind of 2 o'clock reference point on the clock face.
As they move the hands of the club out this way,
the club gets very, very steep.
And what that does is it causes the club path to be very much out to in and across the golf ball.
I mean, that was an awful strike.
It didn't find anywhere near the center of the club face.
Out to in by 8.4 degrees.
So, as is the theme in this video, we're going to reverse it.
We're not going to get you to move to 2 o'clock.
We're going to get you to move to this position here.
I call this the 5 o'clock drill.
You're going to make your back swing.
You're going to hold your rotation.
So, I feel like my back is at the screen.
I'm facing you where you're viewing this from.
What I'm going to do from here is I'm going to use my hands and arms.
I'm going to put the club on the ground behind me at 5 o'clock.
Pretty much where that golf ball is.
So, I'm using my hands and arms to move the club down to the ground.
Notice I'm still facing you.
Back is at the screen.
From here, I'm going to swing through.
Now, I'm obviously not going to hit the golf ball.
But if I show that again, up, down to 5 o'clock, club on the ground, and go through.
If I do that really, really slow motion, so hands down, what club path am I creating here?
Is my club moving from out to in or in to out?
It's in to out by quite a lot because I made that drill really extreme.
So, what we have to do in transition is we have to think a little bit about
how much you're using your body rotation and how much you're using your arms.
If your transition is arms down, body turn, you're in to out and you're most likely hooking it.
We've got to try and find that blend.
But if you're a slicer, you've got to feel more towards that second movement.
That doesn't mean that's where you're going to be on the golf course.
You're not going to hit shots on the golf course
where your club is hitting the ground and you're turning through.
But the feeling practice is really key.
So, just watch what happens to my path when I go.
Feel it, feel it, and I'm going to go ahead and hit one.
I mean, that was up the right.
It drew back a little bit, but the key thing is what did that do to my path in to out?
11.5 degrees.
That's perfect.
That drill is exactly what I need.
That ball didn't come back to target.
That might have missed a fair way on the right.
Didn't plan it that way, but this leads us on quite nicely to our final point,
which is all to do with the release,
which is going to get those balls to curve back into the fairway.
So, if you've made all the changes so far, and hopefully you have,
we have to change the release.
This is such a key point.
So, a slicer, if you've ever looked at a slicer,
maybe it's your own golf thing, maybe it's your playing partners,
you'll see them on the way through have this kind of look to them.
And I want you to think about three things here, elbows and grip.
Where does my trial elbow point?
Where is the back of my elbow?
It's pointing down at the ground.
What about my lead elbow?
More up towards the sky.
And what about the grip of the club?
Probably level, if not a little bit up.
That's fairly common for a slicer.
What I would love you to practice, what I would love you to train
is all those three reference points down at the ground.
Down at the ground.
Grip is down, elbows down, elbows down.
What ultimately we're doing there is we're changing the rotation of your arms.
And when we change the rotation of your arms,
we're changing the rotation of the clubface.
We need that clubface to be rotating more through impact.
So, what I'd love you to do is take a driver,
make some little swings, no ball to begin with,
fairly slow speed, three things down.
Elbows down, grip is down, three things down.
And what I'm doing there is essentially letting the golf club rotate
and letting it swing rather than trying to muscle the club through,
almost trying to hold the face open and we get this kind of position here.
So, once I've done a couple of those, I can simply do the same thing
but just let the golf ball get in the way.
Elbows down, grip is down.
It's a really simple concept because I'm giving you
almost this kind of visual checkpoint.
And if you can do that, it feels relatively easy.
What you're actually doing is quite complicated.
You're changing your rotation of your forearms,
you're changing the rotation of the clubface,
you're closing it more to the path,
you're doing all the things that we need you to do
but hopefully in a relatively simple fashion.
Once you can do that, that's going to enable you to get the clubface
slightly close to your path, which is an absolute non-negotiable.
And that is what you're going to expect.
That slice was caused by those four elements.
If you reverse those four elements, you will not slice it.
It is as simple as that.
