INCREDIBLE This Is How Potters Prepared Clay by Hand.

History culture hero
16 followers
3 Video Views·Apr 5, 2026
AI Generated·May contain errors
Before a single pot is shaped, the real work begins deep in the earth.
In a small German village, one of Europe's oldest crafts still survives,
the art of preparing clay by hand. Long before machines took over, every step depended on
skill, patience, and experience passed down through generations.
Today we uncover how raw earth is transformed into the foundation of traditional pottery.
In the small village of Bachenau in western Germany, pottery was once a thriving local
craft. Surrounded by vineyards and forests, this quiet region supplied handmade clay
vessels across a wide area. Today only one potter continues this tradition.
This film follows the careful preparation of clay before it is shaped into everyday objects.
Bachenau was once known for its pottery, with several workshops operating in the early 20th
century. The products were distributed across nearby regions and valleys. Over time, industrial
materials like metal and plastic replaced traditional clay vessels. As demand declined,
most potteries disappeared. Only a single craftsman continues the work today.
The clay used by the potter is dug from the hillside just outside the village.
It lies about one meter beneath a layer of soil. The upper layer is removed and later used to
refill the pit. The local clay has a reddish-yellow color and contains a high amount of sand. Because
of this, it is not suitable on its own for pottery. To make it workable, it must be mixed
with a richer, finer clay. This second clay is brought from another region. The clay is carried
in baskets, each weighing about 50 pounds. Several baskets form a standard working load.
Equal amounts of both clay types are used. This quantity is enough for about two days of work at
the pottery wheel. The remaining pottery workshop can be recognized by its attached work building
and kiln. The potter lives nearby and continues his work on a small scale. Finished pottery and
decorative items are displayed outside his home. Behind the house lies the workshop area.
The raw clay is brought into the yard and stored in a prepared pit. Before it can be used,
it must be broken into smaller pieces. The two types of clay are kept separate at this stage.
Large lumps are crushed using simple tools. Measured amounts of both clay types are soaked
with water. This allows them to soften and absorb moisture evenly. The prepared clay is then left to
rest for one or two days. During this time, it becomes easier to process. Inside the workshop,
the softened red and white clays are brought together for mixing. The potter places them in
measured amounts onto a rounded, three-legged block. First, a basket of the richer clay is set
down. Then, a matching amount of the lean local clay is added on top. To keep the clay from
sticking, the basket is dusted with wood ash before each load is emptied. Layer by layer,
the clay is stacked into a tall column, carefully aligned so the mass remains upright. Although
electric wheels and simple machines are now used in the workshop, this part of the process still
follows an old manual method. The potter relies on a one-to-one mixture, developed through
generations of experience, to combine the strength of the lean clay with the flexibility of the
richer clay. Too much fat clay would shrink and crack in the kiln, while too much lean clay would
break too easily during shaping. By stacking and preparing the clay in this way, the potter creates
the right balance before the cutting and cleaning stage begins. The stacked clay is cut into thin
slices using a curved blade. This helps mix the material further. At the same time, stones and
impurities are detected and removed. Clean clay is essential for producing quality pottery.
During cutting, stones reveal themselves by interrupting the pull of the blade and producing
a sharp metallic sound. These are removed at once, while roots and finer impurities remain
to be dealt with later. As the potter continues around the column, his assistant begins gathering
the sliced clay into workable lumps. The pointed center that remains on the block is cut down
completely as well. Because dried scraps could later form hard lumps in fresh clay, the block
is carefully cleaned before the next stage begins. The cut clay pieces are then brought together
again into a single heap. To spread the moisture more evenly, each lump is dipped in water before
being thrown into place. The pile is built with a broad base, and the pieces are pressed together
into one closed mass. More water is added, so it remains between the layers. Finally, the heap is
shaped into a smooth, rounded mound, and covered so it can rest without drying out. The clay now
has to rest so the moisture can spread evenly through the whole mass. Covered with wet sacks,
it is left until at least the next morning. The longer it matures in this state, the better it
becomes. Only then does it reach the softness needed for the next step. After resting, it is
ready to be passed through the clay mill. The softened clay is then processed through a mechanical
clay mill. Rotating rollers press it into thin layers. This breaks down remaining impurities.
However, the clay is still not fully ready for use. The final preparation takes place on a
wooden workbench. The potter repeatedly throws and folds the clay. This removes trapped air
and ensures an even consistency. The color becomes uniform as the process continues.
The prepared clay is rolled into long shapes and divided into smaller portions. Each piece is sized
according to the type of vessel to be made. Experienced potters can measure this by hand.
These pieces are now ready for the wheel. Once the clay is fully prepared, the potter can begin
shaping it on the wheel. Every step before this point has been essential. Without careful
preparation, the final product would not be strong or durable. This marks the transition from raw
earth to crafted object. The craft of pottery begins long before the wheel starts turning.
It is a process shaped by knowledge, patience, and tradition. In places like Bacchanal,
this knowledge still survives in the hands of a single craftsman. If you enjoy uncovering
traditional processes, subscribe to Uncovered Past for more stories from the past.
