Using Sidechains - AudioTech

TheGospelGuitarist
1 follower
1 Video View·Mar 31, 2026
An instructional video on how to use the sidechains on the back of audio compressors and other units.
Hi, Gospel Guitarist here. If you've been keeping up with my video releases, you will notice that
I have two units on the table that I have talked about previously. This being a compressor,
and this being a 31 band graphic equalizer on the bottom. Now I've discussed how to use both
of these individually, but there will be times when you will want one of these units patched
into the other. So how would we do that? Well, first of all you're going to need a special cable.
What I have here is a four channel insert snake. It's just a thick cable with four tip ring sleeves
at one end, and then at the other end you have eight tip sleeves. So each one of these, if you
look at the color, like the black and white, will break out into a black and white connector at the
other end. So this is tip ring sleeve and this is tip sleeve. Now you can also get these cables
as a single cable. So if you only have like this in your rack, why go out and spend
the money on a big cable like this? You can just get two of these by themselves
separately. But if you're going to have a rack load of gear, you may just want to go ahead and
pick up one of these. So let's turn this unit around. Now on compressors, what you will find
on the back of them is called a side chain output and input. Now this is the same thing as an insert
point on your mixer channel. It's a place where you can put something else into the unit. Now it doesn't
have to be a graphic EQ. It could be a reverb or a special effects unit of some type. It's very
popular to run your vocals through a compressor and then have them hit a nice reverb on their
vocal. So you can patch in a nice reverb unit here. So how would you do that? You would take
one of the channels of your snake. In this case, let's patch in a black and white one.
Now some units say that they're tip ring sleeve. This one indicates that how it's wired. Other
units may have separate jacks, one for the send and one for the receive. But on this unit, you can use
a tip ring sleeve. And then at the other end of the other unit, the tip is send and the ring
is send. So you want to take the ring and they're usually marked on here. It'll say tip and it'll
say ring. So in this case, the ring is black and it's the send. So it sends it from the compressor
and you want to send it into the input of the EQ unit. Okay, so it comes out of here,
goes down the line, goes into the next unit while we need to get the signal back.
So in that case, we take the white, which is the tip, which is the return, plug it into the output,
and then it goes back up the same cable and back into the same jack. Actually, not the same cable,
but the same jack. So now that's all there is to it for connecting it. So if you want to connect
two, just grab another patch. In this case, we got orange and red, or orange and yellow,
and colorblind. And the ring goes to the input because it's the send. And always just read them.
They're always going to be here marked, tip for receiving, and it comes back. So now I have
my compressor 1 and 2 going into the graphic 31 band 1 and 2, and then returning back into
this system. And you would use the same type of cable to connect this top unit, the compressor,
would then be the output. You can use the inputs and outputs of the channels the same way we use
inputs and outputs down here. Because the input and output of the compressor would go to your,
say, channel 1 on your mixer. So at the mixer end, you would have one of these
plugged into the insert jack. And then the other end, you would run your tip sleeves in here to
pass that into your mixer. So that's how the side chains work on this type of setup.
So you can have this going into a 31 band, or you can have it going into a effects unit
of some type. And then they just work together as one unit. So that's just a quick tip on how
you can hook these things into each other. I hope that's helpful. I have done that in just
about every scenario. So I know I use it all the time. And if you own these units, then you're
probably going to wind up doing that too. So I hope you found it helpful. And be sure to subscribe.
And thanks for watching.
