Roland GR-55 Connections

TheGospelGuitarist
1 follower
Mar 31, 2026
Quick video about the connection options on the Roland GR-55 Guitar Synth.
AI Generated·May contain errors
Hi, I'm Mike Sullivan. Welcome to Guitar Tech. How to do it yourself.
Hi, Gospel Guitarist here with a third episode on the Roland GR-55 guitar synthesizer. In this
video I will just talk about the outputs and inputs on the back of the unit. My main goal
was going to be just the guitar stuff, but there's a bunch of things on here to talk about, so
let's get started with that. In the first video I talked about installing it on your guitar,
the GK-1 pickup, or GK-3 pickup system on your guitar. The second video I made was how to set up
your pickup inside the Roland unit itself with all the different settings that can be done
for the pickup to make sure it's going to operate for you. In this video I'm going to talk about how
to hook up your unit with the different pieces of gear that you can use this with. The first
thing you're going to want to do is take this 13-pin cable that came with the unit and plug it
into your GK input right here. That one cable is all you need to hook up your guitar to the box.
You don't use an ordinary guitar cable. They are summed up into this one MIDI input cable.
It carries your analog guitar pickup sound as well, which brings us to the first jack here
where it says guitar out. So this jack here, you have different software options to set up inside
the unit so that it'll put out just the plain pickup sound on your guitar all by itself,
or you can use the modeling in this box to simulate a Stratocaster played through a Marshall
amplifier or a Fender Twin and it'll output the modeling as well as your pickup tone out of this
jack. You also have the option just shutting this down and not using it at all.
And you can set it up to work with patches or just work with all the patches or selective
patching. So this one here, the important thing to know is that this is just your guitar output
signal. So if I want to use the guitar synth for synthesizer sounds like strings and orchestra type
stuff, but I want a complete normal guitar rig to play through, then I can run a normal guitar
cable from here to my Marshall half stack or my rack equipment or whatever I want to play through
and have a normal guitar setup. Now next to it over here you have the output jacks
and this will be stereo or mono. So you can run out, for example, you can run out the mono.
I have a Roland JC-120 amp as one of my amplifiers, so I could come out the mono and just
run it straight into my channel and have all my guitar sound or I can run it in stereo
coming out of here and running it into the effects returns in stereo on the back of my JC-120
bypassing the front preamps on my amplifier completely. So I'd only be using the amplifier
and the speakers of the cab and this would become my preamp. So I could run, for example,
using that setup I could run out of here into my JC-120 for stereo synth sounds and then run my
guitar out to a tube guitar rig like a normal Marshall stack or guitar amplifier or my Digitech
2101 that's in my rack setup which is all tube. So I can have a real tube guitar tone instead of
a simulated guitar tone while playing other synthesized instruments coming out these outputs
here. So I could have up to three things coming out of the machine to basically even up to three
different amplifiers because I could have a separate amp on each one of these outputs for
stereo. If I use the front inputs on my amp I could have two JC-120s powered by these two and
then a full Marshall stack being powered out of the guitar out. So for performing on stage you've
got a lot of options here. We move over again we have the headphones. This is set to a line out
and it just has a nice warm headphone sound to it so you can jam quietly. It has MIDI input and
output and V-Link. I'm not familiar with the V-Link until I got this. I never heard of it.
Apparently you can control background lighting and you know like stage lighting and concert
lighting and things through this with a MIDI box that you can buy from Roland I guess and do custom
stage lighting effects and things so that's kind of cool. Other than that this is just an average
MIDI input and output so you could hook up a MIDI controller to extend the capabilities if you want
more pedals to step on then that'll work or if you want your computer to control this box in the
studio you can use these. Next over we have a computer. There's a little cover here it's just a
little cover it pops off. This is the industrial size as I like to call it USB output. It's the
same kind you find on like your printers and other bigger computer gear. It's more sturdy. I like the
that they went with the heavy duty one instead of the thin skinny things.
So this is not just a computer output it is a MIDI output so now you have two MIDI outputs
and inputs on this. It'll interface with your computer so if you have a digital audio workstation
on your computer this will send audio and MIDI signals to your software so not only can you
record the audio of your guitar or piano sounds or whatever you're playing at the moment it will
also send the MIDI notes to the computer so you actually can have the sheet music being written
at the same time so that's kind of cool. I've always wanted that so that's something that's
nice. I have messed with it just a little bit and it's pretty cool. I have Finale so it's kind
of nice too. Not the full blown Finale I don't have that kind of money but I have Songwriter
and Print Music. So Songwriter is on my laptop that's the one I used. I plugged this in
to my laptop and just brought up a blank music score and started messing around on the guitar
and presto all the notes started showing up in my software so that was kind of cool. I know I got some
setup to do in the software maybe to make sure it's all tracking the way it should be but that
was pretty cool. So I don't know how long I will keep this cover on here. I'll probably lose it
shortly. So that's all that's on the back you got your power switch right here your DCN
is right here for your power supply and that's all that's on the back of the unit. I was pretty
happy to see the separate guitar out so that you could actually use you know separate out the guitar
sounds because one of my concerns was how can I retain my guitar rig tone and use this as an
added instrument which is you know what I would like to do. So finding the guitar out on this was
I like that a lot. It's kind of like a true bypass situation where your guitar comes in
through the midi system and then it just kind of goes right out here but you can set that up and
customize it. So that's it for the setup on the back of this. There's a lot of options
to run it through. I've played it in through my JC-120 and it sounds pretty good and I've
played it a little bit through my Carbon Acoustic AG-100D amplifier which sounds pretty cool too.
So I'm going to do more experimentation with the guitar output and go with it through my tube rig.
The other thing you can do too is I have a Tascam recording deck so I can come out of these
three here to three separate tracks on my recording deck directly so you can have a lot
of good recording setup control for when you're going to sit down and write songs.
So that's it for this video the shortest of the three. So this way at least you can see what
options you have on the output of the GR-55 and have fun with yours. If you just got one I'm
having fun with mine so we'll probably turn out more videos as we go along. So stay tuned and
don't forget to subscribe. Thanks for watching and I hope you found the video helpful and if
have questions be sure to post them. I'm learning too so the manual is really detailed on all the
patch settings. That's a little lacking on how to apply all the technology though so it's going to
be a lot of experimentation but it's a very capable unit so leave questions on anything
you have about the unit and I'll try my best to answer them maybe even with an upcoming video.
So video ideas are always welcome so thanks for watching have a good day now.
Well thanks for watching and see you next time on guitar tech how to do it yourself.
