Graphtech MidDark Switch Demo

TheGospelGuitarist
1 follower
Mar 30, 2026
A demo of the two tones achieved using the Graphtech Mid/Dark Switch for the Ghost system installed on my Schecter C1 E/A.
Hi, I'm Mike Sullivan. Welcome to Guitar Tech. How to do it yourself.
Hi, Gospel Guitars here, and if you caught my last video, you've seen me do a tone mid-boost
on my acoustic piezo system on my Schecter C1EA here. And this is just a demo because
the video of the install was over 16 minutes long and I didn't want to throw a demo on the end of
it. It was already running way long, so I figured I'll just do a separate video and just play a
little bit, do some finger picking, do some strumming. And this is only using the piezo
acoustic tone of the guitar. The mags are off. I'm recording through a carbon acoustic amplifier
here, recording through a Sennheiser 421. And my lapel and the 421 are going straight into my
2488, which will then be added to the video. So, that's the recording setup and the audio setup
for this. Not any serious EQing. So, with the switch down, you get your typical sound,
the original sound of the guitar.
That's with my pinkies a little brighter.
Okay, then with the switch up, you get a mid-boost.
Or if you're a finger guy.
So, as you could hear, the fingernails were coming out that time where they weren't coming
out so much with the switch down. I noticed the big difference. It's hard to tell sometimes with
my ears. I go back and forth, but the big notice is when I flip the switch from being on to off.
See? Back on. Off. So, when it comes on, it's like it's a bass cut mid-boost. And when I turn
it off, the bass gets thicker and the mids go down. So, I would think one of the uses for this
may be, I think that if it's up, if you're having a hard time cutting through, if you're playing live
and you're not quite cutting through and you want to help out the front of the house guy,
your engineer, you can throw that switch up and get those tones to cut through the mix a little bit.
Versus that.
See? The bass is a lot stronger there than it is here. On. Off. Now, I'm not trying,
I'm trying to hit it the same. It's just, it's very hard to play perfectly even.
So, if you're, you could be strumming maybe and cut it down.
So, I think the mid-boost would help in a live situation to really cut through the mix on your
finger picking and things like that. Or if you just really got some mud going on on stage or
something and you just need to cut through it. So, it's not a big huge drastic change,
but I think it would become more drastic the louder you're playing. So,
if you're doing some bar chord stuff,
that's a normal setting.
So, yeah, definitely I would use that to cut through a mix. So,
it's just a nice to have a little switch there. You can have your
mid-boost whenever you want it, whether you're doing finger style and you want to bring a boost
out or cut it down on the rhythm parts. And maybe you want to play normal position on your rhythm
part and then when the chorus hits, throw the switch up for a little more bite on your rhythm
part without changing the style of play. So, there's probably a lot of uses I'm not thinking
of yet for it. But anyway, I wanted to give a slight demo of it and so you can hear it
against itself. So, that's it. There's the demo that I have not heard anybody ask for yet,
but I'm sure it's coming. So, thanks for watching. I hope that was helpful for you. And if you
haven't seen the install and you're interested, then just check out my channel and you'll find
it there just before this video. I have a playlist of all the things I've done for this guitar. As
you can see, it's far from stock. So, that's it for me. Cops Guitar signing off. Thanks for
watching. Well, thanks for watching and see you next time on Guitar Tech, how to do it yourself.
