Stage Monitor Mixer Outputs - AudioTech

TheGospelGuitarist
1 follower
1 Video View·Mar 30, 2026
Clarification on how to wire your stage monitors from a live/studio mixer. We have stage monitors and studio monitors. Which outputs do we use?
Hi, Gospel Guitarist here with a video trying to clarify the monitor mix-up that seems to be going
on with people. This could be easily caused by these words right here, monitor out. Now on most
of the boards that we use for mixing in live environment and in the studio, this is an example
of a studio monitor out left and right. It's usually located near your headphones
right here and somewhere in this main output section of the board. Now when you're wiring
your stage, in my other video I talk about how to set up a monitor mix where I'm talking about
how to use the controls on the channels to set up the monitor mix but I don't go into how it's
actually wired on the stage and things like that. So people are getting, I'm getting questions and
feedback about the people wanting to use this and saying they are doing what I'm telling them and
it isn't working. Well one of the problems with that is because when you do the setups using
your auxiliary sends for your stage monitors, that output is going to go out your auxiliary
outputs. So they're not going to be, that signal is not available here. This is just your stereo
bus, the exact same thing that comes out of here that you send down the Snake to hit your main
power amps or your powered monitor or powered speakers for the front of house.
These where it says monitor out are not meant to be used for stage monitors. This is for if you're
using the mixer in your own home studio and you have a small pair of like Mackies like I have or
Presonus speakers or something in your room and you run left and right out to your monitors
which usually require, most of them have accommodations for your quarter inch jacks
and so they differentiate on all the boards that I've seen and they label them monitor out but
they use a quarter inch jack versus the type of XLR output that a Snake would use on the Snake
sends going to a stage in a live environment. So if you're sending a signal from here it's not that
it can't be done but you're not going to be able to personalize your mixes. The monitors on stage
would just become two more of your main speakers so everything would come out those speakers and
you're not going to be using them as real monitors. So when you're mixing on your board as per say the
other video that I instruct you on then you run your your auxiliary outs and then you run come out
your auxiliary send. Am I on camera here? Yeah right here. So you have auxiliary outs and you would say
monitors would be on auxiliary one so you would run out of auxiliary one down your Snake send to
the stage and then from there you run into your power amp and then from the power amp to your
monitors on stage. That way your auxiliary sends on each channel can control how much of each
instrument each person on stage is wanting to hear in their personalized monitor mix. So just because
it says monitor on your mixer doesn't mean stage monitors. Whenever it says monitor on your mixer
it's talking about studio monitors. So I'm hoping this kind of clarifies that a bit because I get
these questions and people go in that direction on my other video but I really don't go anywhere
near that on my other video. So I thought I'd make this video help clarify the outputs on the mixer.
I hope this helps. Leave comments below and that'll do it. I hope that clarifies it. Thanks for
watching and don't forget to subscribe and like and favorite and share. Thanks for watching!
