Using Mixer Channel Inserts - AudioTech

TheGospelGuitarist
1 follower
Mar 30, 2026
This video covers how to use channel inserts with effects units. I also cover a few types of cables used in the process.
Hi, in this episode what I'm going to be talking about is how to patch in a piece of equipment
into the channel inserts on your mixer. This will work with any type of effects unit. What I have
here is a Behringer Dual Compressor, the Composer Pro XL to be exact. So what do we got to do to put
this in line with say our vocalist so that it evens out their vocals better and you can have
an easier time mixing. So how do we plug this in? If you don't know about these or haven't seen my
other video on an introduction to compressors, you might want to check that out. Or if you're
wanting to do something else, patch in an effects unit or patch in some EQ, a graphic equalizer for
example, then you would want to watch those videos. I have a video on just about most of the
units that are out there as far as the type of unit. So they all connect the same way though,
they just do different jobs. On most of the compressors you have a compressor gate and
limiter so that you can use the gate to have the microphone automatically shut itself off when
they're not singing. You can have a limiter that'll limit how loud they get and the compressor
part portion of it that'll help control the lows. When they get too quiet it'll bring their voice
up a little bit and when they start to sing really loud it'll compress their voice so they don't
you know get really really loud. But the emphasis is still present and these are really minute
changes that happen within this unit or any compressor. So the question is how do we hook
it up and what is an insert point? On most mixers you'll find an insert jack and it is a stereo jack
where your other input is a quarter inch instrument jack. Now for these if you have a full
system you're going to use something like this where you're going to have a snake with a whole
bunch of cables on it going to uh there's actually two of them i have three in my system here um
because i have a lot of effects so like this one's marked for all my compressors so i can
have them all in one snake. For simplicity of this video i'm only going to use one cable
a makeshift uh insert cable. An insert cable has a stereo
um jack on one end and it breaks out to two mono jacks on the other end so the
the end with the stereo plug goes into your insert of your let's just say this is a vocal
channel on channel one and now on the other end of this you're going to have it marked
as tip and ring and that's of course referring to the tip and the center ring here on the other jack
so what you're doing is you're carrying a signal out of this unit to out of your mixer to whatever
effect unit you want to hook up and the tip in this case the gray plug is going to be carrying
the signal from your channel to the device so let's flip the device around and things are always
backwards when you flip them around so whatever was on your left is now on your right okay so
you're going to find the inputs and on this model we have a quarter inch input so that's where we're
going to send the signal to now it's going to process that that microphone and run it back out
of the unit coming out to the ring side or the red side and run back into the channel so it makes a
loop and that's where we get the term effect loop now if you're a guitar player you know about effects
loops on your guitar amps that's why it's called an effects loop because it makes a loop now i could
come out of this unit and run it straight into like an equalizer so i would have a compressor
and an equalizer running in tandem kind of just daisy chain them together because i might want to
put compression on the vocalist but i want might want to have a 15 band eq on the vocalist
so i would come out of here and then run it into the input
of the eq unit and then come out the output of the eq unit with this same cable here so i'm feeding
into one unit and by the time i get through my chain i come back out and i run it back into my
channel but keeping it simple this is all you're doing you're just going to run it out of this
channel so the mic will come in it'll hit the preamp in here and then it breaks off none of
these things are being affected yet it's taking that dry mic signal sending it straight to your
effects unit going in the input on the tip being processed coming out the ring going back forming
the loop closing the loop and re-entering your mixer and then it hits your preamp gain knob here
and on this computer on this one i have built-in compressors but they're just one knob or so
so whatever unit you're going to plug into your channel is going to come before
your effects sends and other things that you might be using on the channel okay through your auxiliary
sends and things like that i'll cover those in another video this is the first in the more
advanced series after my introduction series it's been a while but now i'm going to get into how to
wire things differently with your mixer so today's video is strictly going to keep it to
the channel inserts and that's all there is to it you need a channel insert cable
or a channel insert snake it's going to be constructed the same way now these snakes
you usually have you know four stereo jacks on one end and then i i just use some label tape on
there to gate one and one two three and four and then they're color coded at the other end of the
snake where they patch into the the gate unit so at the other end i would use the black and and
white to patch in gate number one and then i would use the orange and yellow for gate number three
so they're all color coded so you can't mess this up um now these snakes the snakes are a little
pricey but they really save on a whole bunch of these things dangling around inside your case
so that's it folks that's all there is for hooking up an effects unit i hope you found it helpful
and just remember this can be done with your friendly compressor here
it can be done with an effects like a reverb unit for your vocals it can be done
with a guitar processor even you can even patch a guitar processor in this way if you wanted to
so basically it's anything that you want patched into a channel this is one way of doing it so i
hope you found the video helpful and please remember to like and subscribe and i thank
you for watching have a good day
