Chapter 5 The Timing Source

Chrono Chronicles
8 followers
2 Video Views·Apr 3, 2026
We need some way to control the rate the escape wheel turns so the clock will keep accurate time.
This control is provided by the pendulum. The pendulum assembly in our movement is made up of
the suspension post, the suspension spring, the pendulum rod, the pendulum bob, and a rating nut.
The suspension spring is a short, very thin, flexible piece of metal. It slips into this
thin slot on the suspension post and is directly connected to the top of the pendulum rod.
The suspension spring acts as a very low friction hinge which allows the pendulum to swing freely.
The length of the pendulum determines the rate at which it swings back and forth.
The longer the pendulum, the slower it swings. The shorter, the faster. On many clocks,
the pendulum bob is held in place by a rating nut which allows for a small adjustment of the
position of the bob to make fine adjustment of the pendulum's rate. The pendulum assembly is
connected to the escapement through the crutch. The crutch, connected to the anchor, is how the
escapement provides power to the pendulum to keep the pendulum swinging as well as how the
pendulum in turn controls the rate at which the teeth on the escape wheel are released through
the pallets on the anchor. This provides accurate control of the rate at which the escape wheel
turns.
