Knob Pointer Upgrade

TheGospelGuitarist
1 follower
Mar 30, 2026
How to install pointers on your guitars controls.
Hey, Gospel Guitars here. I wanted to just do a real quick video for a very simple upgrade,
but because it is an upgrade to my Schecter C-1E-A, of course I ought to keep the videos
coming, right? The other day I went out and I found me some of these, just little pointers
that go on your controls, on your tone and volume controls that will point to the numbers
on your knobs. Now on this guitar in particular, I do pretty fine adjustments sometimes to match
the piezo output and the magnetic output to get certain tones that I like, so I kind of
miss having the pointers there because I can't always, I'm always second guessing that I get
it in the right spot. So if you're going to be finicky like me sometimes, you might want to do
this little addition. I already installed one here on the volume pot for the magnetics and hopefully
that little reflection is showing up in the camera there. All you have to do is just pop off your
knob and, well on this guitar it's a 7 16ths, but I don't know if that's the standard. They seem
small, they're smaller than some of the other guitars, but you know if you use a closed end
wrench you don't have to worry about scratching the surface of your guitar. This guitar can be
a little tricky because it is a hollow body and I don't want to drop the volume control into the
guitar, so I have to get my fingers under there to make sure I don't do that. And of course under
your nut you're going to have another washer, right? Well you don't really want to put your
pointer, which is a washer, over the washer. You know, just use one washer so you're not going to
the height of your knobs or anything. You're not going to change anything on the guitar that way.
So you're going to want to remove this washer. Be sure to stab yourself in the finger while
you're doing it, otherwise it won't be done right. And turn the pot so that you know where zero is
pretty much. You can decide where zero is depending on how you want to view your guitar.
There's really no set rule on where the pointer should go, but you want it somewhere where it's
going to make sense to you as far as the orientation of it. Then all you do is put your nut back on
and just for the sake of video I'll just do a real fast demo here. Once you get that tight you would
just line up. What I do is line up the 10 and I try to get the same angle on all of my controls.
And you get the 10 lined up. Now that's just a loose assembly. Of course I've got to tighten it,
but just for this video anyway. That's all you need to do to add that nice little
detail to any guitar that you have. Now it would be useless to do that on
knobs that are like, you know, no numbers. You want
knobs with numbers and that's it. Simple upgrade and helps you more accurately determine where you
want your tone and volume knobs and nice little addition to your guitar. So that's it. Simple
upgrade and maybe I'll encourage you to do something like that to yours if you want.
It's not a big operation, very simple and it can be helpful. Most guitars don't come with
these anymore. I know some Gibsons do, but I think that's it. So it's not pointless. Ha!
Pointless. Pun. Get it? Pun. Pun. Anyway, thanks for watching and have fun modding your guitars.
