Carvin Quad X Unboxing

TheGospelGuitarist
1 follower
Mar 30, 2026
Unboxing of my latest purchase, a used Carvin Quad X Guitar Preamp.
AI Generated·May contain errors
Yep, box opening time again. This time it's a
Carbon Quad X guitar preamp. This, I know, I think I said last box opening that it was
my last equipment purchase for the year, but I think this will be the last equipment purchase
for the year. I do like Carbon gear, as you've probably figured out by now, and I like their
older Carbon gear. I found this one on eBay for a decent price, so I thought I would pick it up
because I wanted one since they were developed back in the early 90s. A nice little power cord
included. I anticipate some cleanup. The seller said that the pots were a little bit
squeaky. So, not squeaky, that wouldn't be the right word, would it? Scratchy.
So, I'm looking at, you know, typical cleaning and things like that, going over the unit.
So, I am looking forward to getting into it and going over the whole unit and seeing
how she fares out. So, there she is. Get a little bit squared up there.
So, here we have the Carbon Quad X's guitar preamp. These were, this is probably a 93 through
96. I don't know the exact date yet on it, but it is the MIDI version with the, well, I think all
of them are MIDI capable, but the later model has the proper MIDI cable connectors instead of
quarter inch connectors. And sometimes these usually are sold, you're missing these little
rubber caps and stuff. So, this one had them all. So, it had, I think, a little slight issue here,
like a paint spill I've seen in a photo online. I can just clean all that off.
Nine 12AX7 tubes are inside of these units. And some people, in some forums, just, oh,
it's over-designed, it's overkill. Yeah, it's overtone too. These things sound absolutely
killer for the cleans and the distortion channels. So, I'm looking forward to ripping it open,
seeing what's inside. That'll be in the next video, as far as what the tube complement is on here,
whether the thing's completely stock. There are mods that can be done to these that people do,
and I don't know the history of this one. So, I know I'm at least the third owner,
the person that bought it before me bought it on eBay as well. So, and he did not do anything
with the tubes. So, I don't know if it's completely stock or if there's been any mods on them or
anything. So, I'll be looking on the inside to see what can be done on the unit. But that's
the opening, very nice and quick. It's four channels. If you're not familiar with these
units, the first channel is clean, the second channel is a shared second and third channel,
and up here you have cloaking, which basically hides the low end of the mid-range to clean up
your guitar's tone if you need to. The third channel is more of a crunch, kind of Marshall
JCM45 type crunch, I guess. And then the insane sustain channel. I think there's four tubes
actually just for this channel alone, but they build on the other tubes for the other channels.
So, I'm not a total expert on it, but it has a built-in noise gate right here and built-in reverb
tank, which is also bypassable if you want to patch in your own reverb rack unit. Then this knob
will control the level of your rack unit that you're using instead of the
reverb tank that's inside. It has cabinet voicing right here, so that if you run the XLR outs to
your recording deck, you can get 412 cabinet simulation, which is very good on these units
as well. And then you have stereo outputs and mono outputs right here. And then you've got your
graphic EQ, which can be assigned to any of the four channels. I think your reverb can also be
assigned to all four, or it might be on all the time, but I know that this can be assigned to
each one. Each channel also has its own individual, let me spin it around, each channel has its own
effects loop input and output right here. And then you have a master effects loops right here,
which has got a stereo return, and then you got your external reverb unit with a stereo return.
Your foot switch, which is the FS-57 connection. I'm going to be using MIDI controller.
And then you got your different quarter inch outs, XLR balanced outs, your ground lift switch,
your mono output, and your headphones and another input for your guitar right here. Well, that's
yeah, the second one. So there's a front one and a second one. And that's the unit. You can assign
your MIDI channel here. And you can't see the tubes probably real good, but I don't know if
you can catch them reflecting in that or not. But anyway, that's it. Carbon Quad X, more coming.
Thanks for watching. And if you want to know more about these, subscribe. I will be making,
probably making several videos on the unit. I've searched YouTube and there's not a whole lot about
it. So some demos, but that's it. And so I'm going to be doing more in depth stuff in the future.
So thanks for watching. Please subscribe, like, and share the video.
And until next time, Gospel Guitarist signing off.
